The parameterPublisherIddefines the Publisherto receive NetworkMessagesfrom.

If the value is null, the parameter shall be ignored and all received NetworkMessagespass the PublisherIdfilter.

Valid DataTypesare UIntegerand String.

The parameterWriterGroupId with DataType UInt16defines the identifier of the corresponding WriterGroup.

The default value 0 is defined as null value, and means this parameter shall be ignored.

The parameterDataSetWriterIdwith DataType UInt16 defines the DataSetselected in the Publisherfor the DataSetReader.

If the value is 0 (null), the parameter shall be ignored and all received DataSetMessagespass the DataSetWriterIdfilter.

The parameterDataSetMetaDataprovides the information necessary to decode DataSetMessagesfrom the Publisher. If the DataSetMetaDatachanges in the Publisherand the MajorVersionwas changed, the DataSetReaderneeds an update of the DataSetMetaDatafor further operation. If the update cannot be retrieved in the duration of the MessageReceiveTimeout, the Stateof the DataSetReadershall change to Error_3. The related PublishedDataSetis defined in 6.2.2. The DataSetMetaDataTypeis defined in 6.2.2.1.2. The options for retrieving the update of the DataSetMetaDataare described in 5.2.3.

The parameterDataSetFieldContentMaskwith DataType DataSetFieldContentMaskindicates the fields of a DataValueincluded in the DataSetMessages.

The DataSetFieldContentMaskDataType is defined in 6.2.3.2.

The parameterMessageReceiveTimeoutis the maximum acceptable time between two DataSetMessages. If there is no DataSetMessagereceived within this period, the DataSetReader Stateshall be changed to Error_3 until the next DataSetMessageis received. The DataSetMessagescan be data or keep alive messages.

The MessageReceiveTimeoutis related to the Publisherside parameters PublishingInterval, KeepAliveTimeand KeyFrameCount.

The parameter is defined in 6.2.4.2.

This parameter overwrites the corresponding setting on the ReaderGroupif the value is not INVALID_0.

The parameter is defined in 6.2.4.3.

The parameter shall be null if the SecurityModeis INVALID_0.

The parameter is defined in 6.2.4.4.

The parameter shall be null if the SecurityModeis INVALID_0.

The DataSetReaderPropertiesparameter is an array of DataType KeyValuePairthat specifies additional properties for the configured DataSetReader. The KeyValuePair DataTypeis defined in OPC 10000-5and consists of a QualifiedNameand a value of BaseDataType.

The mapping of the name and value to concrete functionality may be defined by transport protocol mappings, future versions of this specification or vendor specific extensions.

This Structure DataTypeis used to represent the DataSetReaderparameters. The DataSetReaderDataTypeis formally defined in Table 36.

Table 36– DataSetReaderDataType Structure

Name

Type

Description

DataSetReaderDataType

Structure

name

String

The name of the DataSetReader.

enabled

Boolean

The enabled state of the DataSetReader.

publisherId

BaseDataType

Defined in 6.2.8.1.

writerGroupId

UInt16

Defined in 6.2.8.2.

dataSetWriterId

UInt16

Defined in 6.2.8.3.

dataSetMetaData

DataSetMetaDataType

Defined in 6.2.8.4.

dataSetField‌ContentMask

DataSetFieldContentMask

Defined in 6.2.8.5.

messageReceiveTimeout

Duration

Defined in 6.2.8.6.

keyFrameCount

UInt32

headerLayoutUri

String

securityMode

MessageSecurityMode

Defined in 6.2.8.7.

securityGroupId

String

Defined in 6.2.8.8.

securityKeyServices

EndpointDescription[]

Defined in 6.2.8.9.

dataSetReaderProperties

KeyValuePair[]

Defined in 6.2.8.10.

transportSettings

DataSetReaderTransportDataType

Transport specific DataSetReader parameters. The abstract base type is defined in 6.2.8.11.2. The concrete subtypes are defined in the sections for transport mapping specific parameters

messageSettings

DataSetReaderMessageDataType

DataSetMessage mapping specific DataSetReader parameters. The abstract base type is defined in 6.2.8.11.3. The concrete subtypes are defined in the sections for message mapping specific parameters.

subscribedDataSet

SubscribedDataSetDataType

The SubscribedDataSet specific parameters. The abstract base type and the concrete subtypes are defined 6.2.9.

This Structure DataTypeis an abstract base type for transport specific DataSetReaderparameters. The DataSetReaderTransportDataTypeis formally defined in Table 37.

Table 37– DataSetReaderTransportDataType Structure

Name

Type

Description

DataSetReaderTransportDataType

Structure

The DataSetReaderTransportDataType Structurerepresentation in the AddressSpaceis defined in Table 38.

Table 38– DataSetReaderTransportDataType Definition

Attributes

Value

BrowseName

DataSetReaderTransportDataType

IsAbstract

True

References

NodeClass

BrowseName

IsAbstract

Description

Subtype of Structure defined in OPC 10000-5.

HasSubtype

DataType

BrokerDataSetReaderTransportDataType

FALSE

Defined in 6.4.2.4.6.

This Structure DataTypeis an abstract base type for message mapping specific DataSetReaderparameters. The DataSetReaderMessageDataTypeis formally defined in Table 39.

Table 39– DataSetReaderMessageDataType Structure

Name

Type

Description

DataSetReaderMessageDataType

Structure

The DataSetReaderMessageDataType Structurerepresentation in the AddressSpaceis defined in Table 40.

Table 40– DataSetReaderMessageDataType Definition

Attributes

Value

BrowseName

DataSetReaderMessageDataType

IsAbstract

True

References

NodeClass

BrowseName

IsAbstract

Description

Subtype of Structure defined in OPC 10000-5.

HasSubtype

DataType

UadpDataSetReaderMessageDataType

FALSE

Defined in 6.3.1.3.10.

HasSubtype

DataType

JsonDataSetReaderMessageDataType

FALSE

Defined in 6.3.2.3.3.