11.2 CookingKettleParameterType

11.2.1 General

Various cooking processes are possible with a cooking kettle; these include:

—Gently bring to boil;
—Cooking with various power and simmering stages;
—Keeping warm.

In addition, an agitator can be used.

CookingKettleParameterType provides information about the state of the device, the set values and the current actual values.

11.2.2 Definition of the object type

The CookingKettleParameterType is formally defined in Table 33.

Table 33 — CookingKettleParameterType definition
Attribute Value
BrowseNameCookingKettleParameterType
IsAbstractFalse
References NodeClass BrowseName DataType TypeDefinition Modelling
Rule AccessLevel
Subtype of KitchenDeviceParameterType
HasComponentVariableProgramModeCookingKettleModeEnumerationBaseDataVariableTypeM, R
HasComponentVariableCookingLevelInt32BaseDataVariableTypeM, R
HasComponentVariableSetTemperatureFloatAnalogItemTypeM, R
HasComponentVariableActualTemperatureFloatAnalogItemTypeM, R
HasComponentVariableSetProcessTimeInt32AnalogItemTypeM, R
HasComponentVariableTimeRemainingInt32AnalogItemTypeM, R
HasComponentVariableSetCoreTemperatureFloatAnalogItemTypeM, R
HasComponentVariableActualCoreTemperatureFloatAnalogItemTypeM, R
HasComponentVariableSignalModeSignalModeEnumerationBaseDataVariableTypeM, R

11.2.3 Description of the object type

11.2.3.1 ProgramMode variable

This variable describes the state of the device, e.g. heating up, frying.

The data type for the CookingKettleModeEnumeration is defined in section 11.4.1.

11.2.3.2 CookingLevel variable

This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.

11.2.3.3 SetTemperatur variable

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

11.2.3.4 ActualTemperature variable

This variable describes the currently measured temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

11.2.3.5 SetProcessTime variable

This variable describes the set process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

11.2.3.6 RemainingTime variable

This variable describes the remaining process time for cooking in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

11.2.3.7 SetCoreTemperature variable

This variable describes the set core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

11.2.3.8 ActualCoreTemperature variable

This variable describes the currently measured core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

11.2.3.9 SignalMode variable

This variable describes the state of the signal output. In addition to the on and off states, the "Signal was acknowledged" state is also saved.

The data type for the SignalModeEnumeration is defined in 11.4.2.