Various cooking processes are possible with a pasta cooker; these include:

—Gently bring to boil;

—Cooking with various power and simmering stages;

—Keeping warm.

Figure 17 shows an overview of the object types for the device class Pasta Cooker / Cook Marie.

Figure 17 — Overview of object types for Pasta Cooker / Cook Marie

PastaCookerParameterType provides information about the state of the device, the set values and the current actual values.

The PastaCookerParameterType is formally defined in Table 41.

Table 41 — PastaCookerParameterType definition

Attribute	Value
BrowseName	PastaCookerParameterType
IsAbstract	False
References		NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule AccessLevel
Subtype of KitchenDeviceParameterType
HasComponent		Variable	ProgramMode	PastaCookerModeEnumeration	BaseDataVariableType	M, R
HasComponent		Variable	CookingLevel	Int32	BaseDataVariableType	M, R
HasComponent		Variable	SetTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	ActualTemperature	Float	AnalogItemType	M, R
HasComponent		Variable	SetProcessTime	Int32	AnalogItemType	M, R
HasComponent		Variable	TimeRemaining	Int32	AnalogItemType	M, R
HasComponent		Variable	SignalMode	SignalModeEnumeration	BaseDataVariableType	M, R

This variable describes the state of the device, e.g. heating up, frying, etc.

The data type for the PastaCookerModeEnumeration is defined in section 13.4.1.

This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the set process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the remaining process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the state of the signal output. In addition to the on and off states, the "Signal was acknowledged" state is also saved.

The data type for the SignalModeEnumeration is defined in 13.4.2.

PastaCookerDeviceType describes a device from the Pasta Cooker / Cook Marie device class.

The PastaCookerDeviceType is formally defined in Table 42.

Table 42 — PastaCookerDeviceType definition

Attribute	Value
BrowseName	PastaCookerDeviceType
IsAbstract	False
References		NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule AccessLevel
Subtype of CommercialKitchenDeviceType
HasProperty		Variable	IsWithLift	Boolean	PropertyType	M, R
HasProperty		Variable	EnergySource	EnergySourceEnumeration	PropertyType	M, R
HasComponent		Object	PastaCooker		PastaCookerParameterType	M, R

This property describes whether the device has an automatic lift for raising and lowering the pasta basket.

The EnergySource property returns the type of energy supply. The data type for the EnergySourceEnumeration is defined in 21.1.

The PastaCooker object contains the parameters for a device of the type Pasta Cooker / Cook Marie.

The data type is an enumeration of the current status of the device.

The enumeration values are defined in Table 43.

Table 43 — PastaCookerModeEnumeration values

Value	Description
Off_0	off
Preheat_1	heating up
SoftCook_2	Gently bring to boil
Cook_3	Bring to boil with 3 simmering stages
CookSlow_4	Boiling with 3 power stages
KeepWarming_5	Keeping warm
PresetStart_6	Start time preselection active
Error_7	Error state

This data type is an enumeration of the signal state.

The enumeration values are defined in Table 44.

Table 44 — SignalModeEnumeration values

Value	Description
SignalOff_0	Signal switched off
SignalOn_1	Signal switched on
SignalAck_2	Signal acknowledged