11.8 ControlModeEnumeration
The ControlModeEnumeration contains the PackML modes of operation of a machine.
The ControlModeEnumeration is defined in the following table.
| Name | Value | Description |
|---|---|---|
| OTHER | 0 | This state is used if no other state below applies. |
| PRODUCTION | 1 | Primary Mode used for all production activities, All PackML model states will be utilized. The unit/machine executes relevant logic in response to commands which are mainly coming from External Systems, or entered directly by the operator. |
| MAINTENANCE | 2 | Used for routine preventive Maintenance or planned maintenance. Shall be utilized to document planned maintenance occurrence and duration. This mode allows authorized personnel to run the unit/machine independent of other systems. This mode would typically be used for fault finding, machine trials, or testing operational improvements. For example: The cleaning of a print head is maintenance. |
| MANUAL | 3 | Used for fault diagnosis of unplanned technical intervention. |
| CHANGE OVER | 4 | Used specifically for format or recipe change over, includes “cleaning” operations. |
| CLEAN | 5 | Used for Routine Cleaning requirements example: as specified by factory maintenance procedures. |
| SET UP | 6 | Used for set up or adjustments example: mechanical adjustments and testing. |
| EMPTY OUT | 7 | Used to empty out machine example: end of a block of shifts prior to factory weekend shut down, empty out resident product within the machine that could be sent to finished product and minimize part finished “rework”. |
| REMOTE SERVICE | 8 | Used when the machine is serviced remotely, which is a form of remote maintenance. Remark. The Remote Service mode fulfil the safety requirements of the harmonized norm EN415-10:2011 (Safety of packaging machines). |
Its representation in the AddressSpace is defined in the following table.
| Attribute | Value | |||||
| BrowseName | ControlModeEnumeration | |||||
| IsAbstract | False | |||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | |
|---|---|---|---|---|---|---|
| Subtype of the Enumeration type defined in OPC 10000-5 | ||||||
| 0:HasProperty | Variable | 0:EnumValues | 0: EnumValueType [] | 0:PropertyType | ||