7.52 CalibrationPointType
The CalibrationPointType provides ObjectType to add calibration points of sensors resp. signals and is formally defined in Table 231.
| Attribute | Value | ||||
| BrowseName | CalibrationPointType | ||||
| IsAbstract | False | ||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other |
|---|---|---|---|---|---|
| Subtype of 0:BaseObjectType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node | |||||
| 0:HasComponent | Variable | CalibrationSetpoint | 0:Float{Any} | 0:BaseDataVariableType | O |
| 0:HasComponent | Variable | CalibrationActualValue | 0:Float{Any} | 0:BaseDataVariableType | O |
| Conformance Units | |||||
|---|---|---|---|---|---|
| PA-DIM ICalibration CalibrationPointSet |
The components of CalibrationPointType have additional references which are defined in Table 232.
| SourceBrowsePath | Reference Type | Is Forward | TargetBrowsePath |
| CalibrationSetpoint | 0:HasDictionaryEntry | True | 3:<DictionaryEntryName> |
| CalibrationActualValue | 0:HasDictionaryEntry | True | 3:<DictionaryEntryName> |
3:<DictionaryEntryName> is a placeholder for an object of IrdiDictionaryEntryType that represents a property defined in IEC 61987 Common Data Dictionary (CDD). In instances of CalibrationPointType it shall be replaced by an object of IrdiDictionaryEntryType depending on the type of PAT measurement, following these rules:
For CalibrationSetpoint it shall be replaced by one of the following CDD properties: ABP597#001, ABP600#001, ABP603#001, ABP606#001, ABP609#001, ABP612#001, ABP615#001, ABP618#001 (input values for the calibration of PAT concentration measurement), ABP637#001, ABP621#001, ABP624#001, ABP627#001, ABP630#001, or ABP633#001 (input values for the calibration of PAT liquid analysis measurement). If further types of PAT measurements are defined in the CDD in the future, the corresponding properties of these measurement types will also be permitted.
For CalibrationActualValue it shall be replaced by one of the following CDD properties: ABP598#001, ABP601#001, ABP604#001, ABP607#001, ABP610#001, ABP613#001, ABP616#001, ABP619#001 (digital output values measured during the PAT concentration measurement calibration), ABP638#001, ABP622#001, ABP625#001, ABP628#001, ABP631#001, or ABP634#001 (digital output values measured during the PAT liquid analysis measurement calibration). If further types of PAT measurements are defined in the CDD in the future, the corresponding properties of these measurement types will also be permitted.