7.46 ControlSignalTypeThe ControlSignalType provides ObjectType to add variables and an AutoAdjustPositioner Method. It is formally defined in Table 219 .
Table 219 - ControlSignalType definition
Attribute
Value
BrowseName ControlSignalType IsAbstract False
References
NodeClass
BrowseName
DataType
TypeDefinition
Other
Subtype of SignalType defined in 7.23 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Method AutoAdjustPositioner Defined in 9.3 O 0:HasComponent Variable ControlSignal 0:Float{Any} ControlVariableType M
Conformance Units
PA-DIM Control Signal PA-DIM AutoAdjustPositioner method
AutoAdjustPositioner: ABN726#002 defines a property the value of which indicates the kind of adjustment function to be executed.
ControlSignal provides the readback process value. This is the position of the final control element within the travel span (between OPEN and CLOSE position). The unit of this value is provided by the EngineeringUnits property.
The components of ControlSignalType have additional references which are defined in Table 220 .
Table 220 - ControlSignalType additional References
The child Nodes of the ControlSignalType have additional Attribute values defined in Table 221 .
Table 221 - ControlSignalType Attribute values for child Nodes
BrowsePath
Value Attribute
ControlSignal 0.0 ControlSignal 0:EngineeringUnits
NamespaceUri: http://www.opcfoundation.org/UA/units/cdd/IEC62720
UnitId: 705741328
DisplayName: %
Description: percent
Low: 0
High: 100
ControlSignal ActuatorType
0 ControlSignal ActuatorType 0:ValueAsDictionaryEntries
ns=3;s=0112/2///61987#ABN145#001 ControlSignal ActuatorType 0:ValueAsText
sliding-stem linear ControlSignal OperatingDirection
0 ControlSignal OperatingDirection 0:ValueAsDictionaryEntries
ns=3;s=0112/2///61987#ABL147#001 ControlSignal OperatingDirection 0:ValueAsText
direct
0.0 ControlSignal Setpoint 0:EngineeringUnits
NamespaceUri: http://www.opcfoundation.org/UA/units/cdd/IEC62720
