IDiodeArrayDeviceConditionSetType – OPC UA for Process Automation Devices

7.1.14 IDiodeArrayDeviceConditionSetType

The IDiodeArrayDeviceConditionSetType provides the interface to Diode array spectrometer device specific condition variables and is formally defined in Table 52.

Table 52 - IDiodeArrayDeviceConditionSetType definition

Attribute	Value
BrowseName	IDiodeArrayDeviceConditionSetType
IsAbstract	True

References	NodeClass	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseInterfaceType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node
0:HasProperty	Variable	Watchdog	0:Boolean	0:PropertyType	O
0:HasProperty	Variable	RemainingDataStorageCapacity	0:Float	0:PropertyType	O

Conformance Units
PA-DIM DiodeArraySpectrometerType
PA-DIM DiodeArraySpectrometerType Watchdog
PA-DIM DiodeArraySpectrometerType RemainingDataStorageCapacity

Watchdog is defined by IRDI as ABP996#002 which states "existence of a function for failure detection of installed hardware and software"

RemainingDataStorageCapacity is defined by IRDI as ABQ039#001 which states "amount of memory remaining for storage of device data, measured in terabytes".

The components of IDiodeArrayDeviceConditionSetType have additional references which are defined in Table 53.

Table 53 - IDiodeArrayDeviceConditionSetType additional References

SourceBrowsePath	Reference Type	Is Forward	TargetBrowsePath
Watchdog	0:HasDictionaryEntry	True	3:0112/2///61987#ABP996#002
RemainingDataStorageCapacity	0:HasDictionaryEntry	True	3:0112/2///61987#ABQ039#001

The child Nodes of the IDiodeArrayDeviceConditionSetType have additional Attribute values defined in Table 54.

Table 54 - IDiodeArrayDeviceConditionSetType Attribute values for child Nodes

BrowsePath	Value Attribute
RemainingDataStorageCapacity	0.0