7.1 PA-DIM Interfaces

7.1.1 IAdministrationType

The IAdministrationType provides the interface to administration variables and methods of the device and is formally defined in Table 16.

DisplayLanguage: is the language used for the local display of the device. ABN597#004 defines language or languages set on the display.

DateOfLastChange: ABN604#001 defines parameter indicating the date and time at which one of the device parameters was changed the last time.

FactoryReset: ABN609#002 property the value of which indicates the kind of reset function to be executed. Note: Properties can be variables or methods according IEC 61987 CDD.

The components of IAdministrationType have additional references which are defined in Table 17.

The child Nodes of the IAdministrationType have additional Attribute values defined in Table 18.

7.1.2 ISignalSetType

The ISignalSetType provides the interface to process variables of the device and is formally defined in Table 19.

SignalSet is a container object for the process variables of the device.

7.1.3 ICalibrationType

The ICalibrationType provides the interface to calibration variables of the sensor resp. signal and is formally defined in Table 20.

The components of ICalibrationType have additional references which are defined in Table 21.

The child Nodes of the ICalibrationType have additional Attribute values defined in Table 22.

7.1.4 IConductivityCalibrationType

The IConductivityCalibrationType provides the interface to conductivity measurement specific calibration variables of the sensor resp. signal and is formally defined in Table 23.

The components of IConductivityCalibrationType have additional references which are defined in Table 24.

The child Nodes of the IConductivityCalibrationType have additional Attribute values defined in Table 25.

7.1.5 IAmperometricCalibrationType

The IAmperometricCalibrationType provides the interface to amperometric measurement specific calibration variables of the sensor resp. signal and is formally defined in Table 26.

The components of IAmperometricCalibrationType have additional references which are defined in Table 27.

The child Nodes of the IAmperometricCalibrationType have additional Attribute values defined in Table 28.

7.1.6 IOpticalFluorescenseQuenchingCalibrationType

The IOpticalFluorescenseQuenchingCalibrationType provides the interface to optical fluorescence quenching measurement specific calibration variables of the sensor resp. signal and is formally defined in Table 29.

The components of IOpticalFluorescenseQuenchingCalibrationType have additional references which are defined in Table 30.

The child Nodes of the IOpticalFluorescenseQuenchingCalibrationType have additional Attribute values defined in Table 31.

7.1.7 IGasChromatographCalibrationType

The IGasChromatographCalibrationType provides the interface to gaschromatograph measurement specific calibration variables of the sensor resp. signal and is formally defined in Table 32.

CalibrationRange1ResponseFactor is defined by IRDI as ABQ024#001 which states "ratio between the concentration of a compound being analysed and the response of the detector to that compound for the calibration range 1".

CalibrationRange1LowerRangeValue is defined by IRDI as ABQ025#001 which states "volume concentration value assigned to the lower range end-value of calibration range 1".

CalibrationRange1UpperRangeValue is defined by IRDI as ABQ026#001 which states "volume concentration value assigned to the upper range end-value of calibration range 1".

CalibrationRange2ResponseFactor is defined by IRDI as ABQ027#001 which states "ratio between the concentration of a compound being analysed and the response of the detector to that compound for the calibration range 2".

CalibrationRange2LowerRangeValue is defined by IRDI as ABQ028#001 which states "volume concentration value assigned to the lower range end-value of calibration range 2".

CalibrationRange2UpperRangeValue is defined by IRDI as ABQ029#001 which states "volume concentration value assigned to the upper range end-value of calibration range 2".

CalibrationRange3ResponseFactor is defined by IRDI as ABQ030#001 which states "ratio between the concentration of a compound being analysed and the response of the detector to that compound for the calibration range 3".

CalibrationRange3LowerRangeValue is defined by IRDI as ABQ031#001 which states "volume concentration value assigned to the lower range end-value of calibration range 3".

CalibrationRange3UpperRangeValue is defined by IRDI as ABQ032#001 which states "volume concentration value assigned to the upper range end-value of calibration range 3".

The components of IGasChromatographCalibrationType have additional references which are defined in Table 33.

The child Nodes of the IGasChromatographCalibrationType have additional Attribute values defined in Table 34.

7.1.8 IPhCalibrationType

The IPhCalibrationType provides the interface to pH measurement specific calibration variables of the sensor resp. signal and is formally defined in Error! Reference source not found..

The components of IPhCalibrationType have additional references which are defined in Table 36.

The child Nodes of the IPhCalibrationType have additional Attribute values defined in Table 37.

7.1.9 IGeneralDeviceConditionSetType

The IGeneralDeviceConditionSetType provides the interface to condition variables of the device and its components and is formally defined in Table 38.

<DeviceComponentIdentifier> is an optional placeholder for an object containing the condition variables related to a specific device component.

7.1.10 ITocDeviceConditionSetType

The ITocDeviceConditionSetType provides the interface to TOC device specific condition variables and is formally defined in Table 40.

The components of ITocDeviceConditionSetType have additional references which are defined in Table 41.

The child Nodes of the ITocDeviceConditionSetType have additional Attribute values defined in Table 42.

7.1.11 IFlameIonisationDeviceConditionSetType

The IFlameIonisationDeviceConditionSetType provides the interface to FID specific condition variables and is formally defined in Table 43.

The components of IFlameIonisationDeviceConditionSetType have additional references which are defined in Table 44.

The child Nodes of the IFlameIonisationDeviceConditionSetType have additional Attribute values defined in Table 45.

7.1.12 IGasChromatographDeviceConditionSetType

The IGasChromatographDeviceConditionSetType provides the interface to gas chromatograph device specific condition variables and is formally defined in Table 46

The components of IGasChromatographDeviceConditionSetType have additional references which are defined in Table 48.

The child Nodes of the IGasChromatographDeviceConditionSetType have additional Attribute values defined in Table 48.

7.1.13 IFtnirOrFtirDeviceConditionSetType

The IFtnirOrFtirDeviceConditionSetType provides the interface to Fourier Transform Near-Infrared Spectroscopy or Fourier Transform Infrared Spectroscopy device specific condition variables and is formally defined in Table 49.

The components of IFtnirOrFtirDeviceConditionSetType have additional references which are defined in Table 50.

The child Nodes of the IFtnirOrFtirDeviceConditionSetType have additional Attribute values defined in Table 51.

7.1.14 IDiodeArrayDeviceConditionSetType

The IDiodeArrayDeviceConditionSetType provides the interface to Diode array spectrometer device specific condition variables and is formally defined in Table 52.

The components of IDiodeArrayDeviceConditionSetType have additional references which are defined in Table 53.

The child Nodes of the IDiodeArrayDeviceConditionSetType have additional Attribute values defined in Table 54.

7.1.15 IRamanDeviceConditionSetType

The IRamanDeviceConditionSetType provides the interface to Raman spectrometer device specific condition variables and is formally defined in Table 55.

The components of IRamanDeviceConditionSetType have additional references which are defined in Table 56.

The child Nodes of the IRamanDeviceConditionSetType have additional Attribute values defined in Table 57.

7.1.16 INonDispersiveInfraredSignalConditionSetType

The INonDispersiveInfraredSignalConditionSetType provides the interface to NDIR measurement signal specific condition variables and is formally defined in Table 58.

The components of INonDispersiveInfraredSignalConditionSetType have additional references which are defined in Table 59.

The child Nodes of the INonDispersiveInfraredSignalConditionSetType have additional Attribute values defined in Table 60.

7.1.17 ITocSignalConditionSetType

The ITocSignalConditionSetType provides the interface to TOC measurement signal specific condition variables and is formally defined in Table 61.

The components of ITocSignalConditionSetType have additional references which are defined in Table 62.

The child Nodes of the ITocSignalConditionSetType have additional Attribute values defined in Table 63.

7.1.18 IParamagneticSignalConditionSetType

The IParamagneticSignalConditionSetType provides the interface to paramagnetic measurement signal specific condition variables and is formally defined in Table 64.

The components of IParamagneticSignalConditionSetType have additional references which are defined in Table 65.

The child Nodes of the IParamagneticSignalConditionSetType have additional Attribute values defined in Table 66.

7.1.19 IThermalConductivitySignalConditionSetType

The IThermalConductivitySignalConditionSetType provides the interface to thermal conductivity measurement signal specific condition variables and is formally defined in Table 67.

The components of IThermalConductivitySignalConditionSetType have additional references which are defined in Table 68.

The child Nodes of the IThermalConductivitySignalConditionSetType have additional Attribute values defined in Table 69.

7.1.20 ITunableDiodeLaserSignalConditionSetType

The ITunableDiodeLaserSignalConditionSetType provides the interface to TDL measurement signal specific condition variables and is formally defined in Table 70.

The components of ITunableDiodeLaserSignalConditionSetType have additional references which are defined in Table 71.

The child Nodes of the ITunableDiodeLaserSignalConditionSetType have additional Attribute values defined in Table 72.

7.1.21 IZirconiumDioxideSignalConditionSetType

The IZirconiumDioxideSignalConditionSetType provides the interface to Zirconium dioxide measurement signal specific condition variables and is formally defined in Table 73.

The components of IZirconiumDioxideSignalConditionSetType have additional references which are defined in Table 74.

The child Nodes of the IZirconiumDioxideSignalConditionSetType have additional Attribute values defined in Table 75.

7.1.22 IPhSignalConditionSetType

The IPhSignalConditionSetType provides the interface to pH measurement signal specific condition variables and is formally defined in Table 76.

The components of IPhSignalConditionSetType have additional references which are defined in Table 77.

The child Nodes of the IPhSignalConditionSetType have additional Attribute values defined in Table 78.

7.1.23 IConductivitySignalConditionSetType

The IConductivitySignalConditionSetType provides the interface to conductivity measurement signal specific condition variables and is formally defined in Table 79.

The components of IConductivitySignalConditionSetType have additional references which are defined in Table 80.

The child Nodes of the IConductivitySignalConditionSetType have additional Attribute values defined in Table 81.

7.1.24 IAmperometricSignalConditionSetType

The IAmperometricSignalConditionSetType provides the interface to amperometric measurement signal specific condition variables and is formally defined in Table 82.

The components of IAmperometricSignalConditionSetType have additional references which are defined in Table 83.

The child Nodes of the IAmperometricSignalConditionSetType have additional Attribute values defined in Table 84.

7.1.25 IAmperometricGasDetectorSignalConditionSetType

The IAmperometricGasDetectorSignalConditionSetType provides the interface to Amperometric Electrochemical signal specific condition variables and is formally defined in Table 85

The components of IAmperometricGasDetectorSignalConditionSetType have additional references which are defined in Table 86.

The child Nodes of the IAmperometricGasDetectorSignalConditionSetType have additional Attribute values defined in Table 87.

7.1.26 IOpticalFluorescenseQuenchingSignalConditionSetType

The IOpticalFluorescenseQuenchingSignalConditionSetType provides the interface to optical fluorescence quenching measurement signal specific condition variables and is formally defined in Table 88.

The components of IOpticalFluorescenseQuenchingSignalConditionSetType have additional references which are defined in Table 89.

The child Nodes of the IOpticalFluorescenseQuenchingSignalConditionSetType have additional Attribute values defined in Table 90.

7.1.27 IGasChromatographSignalConditionSetType

The IGasChromatographSignalConditionSetType provides the interface to gaschromatograph measurement signal specific condition variables and is formally defined in Table 91

The components of IGasChromatographSignalConditionSetType have additional references which are defined in Table 92.

The child Nodes of the IGasChromatographSignalConditionSetType have additional Attribute values defined in Table 93.

7.1.28 IFtnirOrFtirSignalConditionSetType

The IFtnirOrFtirSignalConditionSetTypeprovides the interface to FT NIR or FT IR signal specific condition variables and is formally defined in Table 94

The components of IFtnirOrFtirSignalConditionSetType have additional references which are defined in Table 95.

The child Nodes of the IFtnirOrFtirSignalConditionSetType have additional Attribute values defined in Table 96.