6.11 CncMessageType

6.11.1 General

This OPC UA ObjectType may be used for reporting simple information messages that do not represent an alarm. For instance some CNC systems offer the possibility to trigger messages out of the CNC part program for the purpose of tracking. This would be an example for using the CncMessageType.

As CncMessageType is derived from the OPC UA BaseEventType, it shall be used in most parts as specified in OPC 10000-5.

Figure 19 gives an overview on CncMessageType. It is formally defined in Table 17.

Figure 19 – CncMessageType

6.11.2 ObjectType Definition

The CncMessageType is formally defined in Table 17.

Table 17 – CncMessageType Definition
Attribute Value
BrowseNameCncMessageType
IsAbstractFalse
References NodeClass BrowseName DataType TypeDefinition ModellingRule
Inherit the components of the BaseEventType

6.11.3 ObjectType Description

There are currently no components subordinated to this ObjectType.