Search

200 result(s) for InstanceDeclarations

• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  4.6.2 Complex TypeDefinitionNodes and their InstanceDeclarations
  Complex TypeDefinitionNodes and their InstanceDeclarations TypeDefinitionNodes can be complex. A complex TypeDefinitionNode also defines References to other Nodes as part of the type definition. The ModellingRules defined in 6.4.4 specify ... type definitions from instances that represent real data, those instances are called InstanceDeclarations . However, this term is used to simplify this specification, if an instance is an InstanceDeclaration
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  4.6.4 Instantiation of complex TypeDefinitionNodes
  reference two Nodes having the same BrowseName using forward hierarchical References . Instances based on InstanceDeclarations shall always keep the same BrowseName as the InstanceDeclaration they are derived from. A special ... called TranslateBrowsePathsToNodeIds may be used to identify the instances based on the InstanceDeclarations . Using the simple Browse Service might not be sufficient since the uniqueness of the BrowseName is only
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  4.10.2 Interface Model
  definition of Interfaces : Interface ObjectTypes shall be abstract subtypes of the BaseInterfaceType ObjectType . InstanceDeclarations on an Interface shall only have ModellingRules Optional or Mandatory . Interfaces can be subtyped as specified ... same BrowsePath in the fully-inherited InstanceDeclarationHierarchy of the ObjectType . The rules for instantiating InstanceDeclarations defined in 6.2.6 shall be applied. Each optional InstanceDeclaration of the fully-inherited InstanceDeclaration­Hierarchy
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.8.6.1 Overview
  used. A SubtypeRestriction shall only be used on Variables used as instances, never on InstanceDeclarations or VariableTypes . For Method Arguments , it can be used in combination with the HasArgumentDescription
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.2.3 InstanceDeclarationHierarchy
  InstanceDeclarationHierarchy The InstanceDeclarationHierarchy of a TypeDefinitionNode contains the TypeDefinitionNode and all InstanceDeclarations that are directly or indirectly referenced from the TypeDefinitionNode using forward hierarchical References
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.2.7 Attribute Handling of InstanceDeclarations
  Attribute Handling of InstanceDeclarations Some restrictions exist regarding the Attributes of InstanceDeclarations when the InstanceDeclaration is overridden or instantiated. The BrowseName and the NodeClass shall never change and always ... same as the original InstanceDeclaration . In addition, the rules defined in 6.2.8 apply for InstanceDeclarations of the NodeClass Variable
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.2.9 NodeIds of InstanceDeclarations
  NodeIds of InstanceDeclarations InstanceDeclarations are identified by their BrowsePath . Different Servers might use different NodeIds for the InstanceDeclarations of common TypeDefinitionNodes , unless the definition of the TypeDefinitionNode already defines ... InstanceDeclaration . All TypeDefinitionNodes defined in OPC 10000-5 already define the NodeIds for their InstanceDeclarations and therefore shall be used in all Servers
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.3.3.1 Overview
  Overview Subtypes inherit the fully-inherited parent type's InstanceDeclarations . As long as those InstanceDeclarations are not overridden they are not referenced by the subtype. InstanceDeclarations can be overridden ... optional Attributes . In order to get the full information about a subtype, the inherited InstanceDeclarations have to be collected from all types that can be found by recursively following
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.3.3.2 Fully-inherited InstanceDeclarationHierarchy
  sake of clarity; all Nodes except for 1, 6, and 5 have ModellingRules ). All InstanceDeclarations of the InstanceDeclarationHierarchy and all Nodes referenced with a NonHierarchical Reference from such an InstanceDeclaration
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.3.3.3 Overriding InstanceDeclarations
  Overriding InstanceDeclarations A subtype overrides an InstanceDeclaration by specifying an InstanceDeclaration with the same BrowsePath . An overridden InstanceDeclaration shall have the same NodeClass and BrowseName . The TypeDefinitionNode of the overridden ... used to determine the BrowsePath of the Node ). It is only possible to override InstanceDeclarations that are directly referenced from the TypeDefinitionNode . If an indirect referenced InstanceDeclaration , such
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.1 Overview
  BrowsePath which may be the same as the BrowsePath for one of the InstanceDeclarations in the hierarchy of the TypeDefinitionNode. The InstanceDeclaration with the same BrowsePath is called the InstanceDeclaration
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.2 Creating an Instance
  TypeDefinitionNode and BrowseName . If new copies are created, then the Attribute values of the InstanceDeclarations are used as the initial values. An instance shall not be a SourceNode ... Instance and its TypeDefinitionNode It is up to the Server to decide which InstanceDeclarations appear in any single instance. In some cases, the Server will not define the entire instance
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.3 Constraints on an Instance
  Nodes , and References may be deleted as long as the ModellingRules defined on the InstanceDeclarations of the TypeDefinitionNode are still fulfilled. For Variables and Objects the HasTypeDefinition Reference shall always ... same TypeDefinitionNode as the InstanceDeclaration or a subtype of it. If two InstanceDeclarations of the fully-inherited InstanceDeclarationHierarchy have been connected directly with several References , all those References shall connect
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.1 General
  defined in this standard do not define how to deal with NonHierarchical References between InstanceDeclarations , i.e. it is Server -specific if those References exist in an instance hierarchy ... AddressSpace . Subclause 6.4.4.3 defines how the ModellingRule may be changed when instantiating InstanceDeclarations with respect to the Properties . Subclause 6.4.4.2 defines how the ModellingRule may be changed when overriding InstanceDeclarations
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.3 Instantiation Rules for Properties of ModellingRules
  first case, it is not required that newly created or referenced instances based on InstanceDeclarations have a ModellingRule , however, it is allowed that they have any ModellingRule independent ... second case, all instances that are referenced directly or indirectly from 'A' based on InstanceDeclarations of 'A_Type' initially maintain the same ModellingRule as their InstanceDeclarations. The ModellingRules
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.4.3 ExposesItsArray
  Variable in the AddressSpace . The ExposesItsArray ModellingRule can only be applied on InstanceDeclarations of NodeClass Variable that are part of a VariableType having a single- or multidimensional array ... need to provide that information. It is allowed to reference A by other InstanceDeclarations as well. Those References have to be reflected on each instance based on A. Figure
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.4.4 OptionalPlaceholder
  information when exposing a TypeDefinition . When the InstanceDeclaration is complex, i.e. it references other InstanceDeclarations with hierarchical References , these InstanceDeclarations are not further considered for instantiating the TypeDefinition ... recommended that the BrowseName and the DisplayName of InstanceDeclarations having the OptionalPlaceholder ModellingRule should be enclosed within angle brackets. When overriding the InstanceDeclaration, the ModellingRule shall remain OptionalPlaceholder . For Methods
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.4.5 MandatoryPlaceholder
  Service (see OPC 10000-4 ). When the InstanceDeclaration is complex, i.e. it references other InstanceDeclarations with hierarchical References , these InstanceDeclarations are not further considered for instantiating the TypeDefinition ... recommended that the BrowseName and the DisplayName of InstanceDeclarations having the MandatoryPlaceholder ModellingRule should be enclosed within angle brackets. When overriding the InstanceDeclaration, the ModellingRule shall remain MandatoryPlaceholder . For Methods
• OPC-10000-4 – OPC Unified Architecture - Part 4: Services
  7.22.3 EventFilter
  inherited EventType where the Node is also the source of a HasModellingRule reference. EventTypes , InstanceDeclarations and Modelling Rules are described completely in OPC 10000-3 . In some cases the same
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  3.3 Conventions for Node descriptions
  they are not defined in other tables. For example, the ObjectType ServerType defines its InstanceDeclarations in the same table, so the InstanceDeclarations are also bound to the ConformanceUnits defined ... table. The table even indirectly defines additional InstanceDeclarations as components of the top-level InstanceDeclarations , that are not directly visible in the table. The TypeDefinitions and DataTypes used
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  4.1 NodeIds
  ServerType defined in 6.3.1 has the symbolic name "ServerType". One of its InstanceDeclarations would be identified as "ServerType.ServerCapabilities". Since this Object is complex, another InstanceDeclaration
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  6.3.13 NamespaceMetadataType
  Attributes in all Servers , including the Value Attribute . For TypeDefinitionNodes , also the InstanceDeclarations shall be identical. That means that for static Nodes the semantic is always the same. Namespaces with
• OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings
  F.3 UANode
  UATypes and static UAInstances. The field shall not be specified for UAInstances that are InstanceDeclarations . References Reference [] The list of References for the Node . RolePermissions RolePermission [] The list of RolePermissions
• OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings
  F.7 UAInstance
  intended for use by design tools. This field shall be specified for all InstanceDeclarations and shall reference a UANode which is the source of a HierarchicalReference to the Node. DesignToolOnly
• OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions
  5.2 Two-state state machines
  filter for a MonitoredItem. The TrueState Property and FalseState Property shall only exist on InstanceDeclarations . See Figure 9 for an illustration. Clients can use the Read Service
• OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions
  6.4 Conditions in InstanceDeclarations
  Conditions in InstanceDeclarations Figure 28 shows the use of the HasCondition Reference and the HasEventSource Reference in an InstanceDeclaration . They are used to indicate what References and Conditions are available ... instance of the ObjectType . The use of the HasEventSource Reference in the context of InstanceDeclarations and TypeDefinition Nodes has no effect for Event generation. Figure 28 - Use of HasCondition
• OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines
  4.4.19 Special Restrictions on subtyping StateMachines
  HasEffect , FromState , ToState , HasSubStateMachine, HasGuard ) shall be replicated in the subtype as well. If InstanceDeclarations are referenced (e.g., Methods used to trigger Transitions ) either the InstanceDeclaration of the supertype
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  3.3.1.1 Node definitions
  they are not defined in other tables. For example, the ObjectType TopologyElementType defines its InstanceDeclarations in the same table, so the InstanceDeclarations are also bound to the ConformanceUnits defined ... table. The table even indirectly defines additional InstanceDeclarations as components of the top-level InstanceDeclarations , that are not directly visible in the table. The TypeDefinitions and DataTypes used
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  3.3.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  3.3.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in Annex A . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  4.7 DeviceType
  Units DI DeviceType DeviceType is a subtype of ComponentType which means it inherits all InstanceDeclarations . The DeviceType ObjectType is abstract. There will be no instances of a DeviceType itself, only
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  4.8 SoftwareType
  Software Component SoftwareType is a subtype of ComponentType which means it inherits all InstanceDeclarations . The Properties Manufacturer , Model , and SoftwareRevision inherited from ComponentType are declared mandatory for SoftwareType instances
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  3.3.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  3.3.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 16.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  3.3.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  3.3.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 8.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  3.3.1.3 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  3.3.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in Annex A. For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.1 BasicStacklightType
  Node Class BrowseName DataType TypeDefinition Other Subtype of the 0:OrderedListType, i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable StacklightMode StacklightOperationMode 0:PropertyType M 0:HasComponent Object StackLevel ... HasOrderedComponent Reference shall represent the ordering from the base of the stacklight. The InstanceDeclarations of the BasicStacklightType have the Attribute values defined in Table 13 . Table 13 - BasicStacklightType Attribute values
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.2 StacklightType
  BrowseName DataType TypeDefinition Other Subtype of the BasicStacklightType defined in 5.2.1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasInterface ObjectType 2:IDeviceHealthType Properties of the 2:IDeviceHealthType 0:HasComponent ... expose alarm instances and shall be used as specified in OPC 10000-100 . The InstanceDeclarations of the StacklightType have the Attribute values defined in Table 15 . Table 15 - StacklightType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.3 StackLevelType
  Other Subtype of the 0:BaseObjectType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable LevelPercent 0:Float 0:AnalogItemType M 0:HasComponent Variable ... DisplayMode indicates in what way the percentual value is displayed with the stacklight. The InstanceDeclarations of the StackLevelType have the Attribute values defined in Table 17 . Table 17 - StackLevelType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.5 StackElementType
  Other Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. 0:HasInterface ObjectType 0:IOrderedObjectType 0:HasProperty Variable SignalOn 0:Boolean ... enumerate the stacklight elements counting upwards beginning from the base of the stacklight. The InstanceDeclarations of the StackElementType have the Attribute values defined in Table 20 . Table 20 - StackElementType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.6 StackElementLightType
  BrowseName DataType TypeDefinition Other Subtype of the StackElementType defined in 5.2.5 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable SignalColor SignalColor 0:BaseDataVariableType O 0:HasComponent Variable SignalRGBWValue ... shows the control information for each independent colour channel of the stacked element. The InstanceDeclarations of the StackElementLightType have the Attribute values defined in Table 22 . Table 22 - StackElementLightType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.7 StackElementAcousticType
  BrowseName DataType TypeDefinition Other Subtype of the StackElementType defined in 5.2.5 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable OperationMode 0:UInteger 0:BaseDataVariableType M 0:HasComponent Variable ... DataType TypeDefinition Others AcousticSignals 0:HasOrderedComponent Object 0:<OrderedObject> AcousticSignalType MP The InstanceDeclarations of the StackElementAcousticType have the Attribute values defined in Table 25 . Table 25 - StackElementAcousticType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.8 ControlChannelType
  Other Subtype of the 0:BaseObjectType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable SignalOn 0:Boolean 0:PropertyType M 0:HasComponent Variable ... value is interpreted as 0 percent, the highest is interpreted as 100 percent. The InstanceDeclarations of the ControlChannelType have the Attribute values defined in Table 27 . Table 27 - ControlChannelType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  5.2.9 AcousticSignalType
  Other Subtype of the 0:BaseObjectType defined in OPC 10000-5 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasInterface ObjectType 0:IOrderedObjectType 0:HasProperty Variable 0:NumberInList 0:UInteger ... Property . AudioSample contains the audio data, e.g. for devices capable of audio playback. The InstanceDeclarations of the AcousticSignalType have the Attribute values defined in Table 29 . Table 29 - AcousticSignalType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  6.2.1.1 Overview
  Other Subtype of the 0:BaseInterfaceType defined in OPC 10000-5 i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable StartTime 0:DateTime 0:PropertyType O 0:HasComponent Method ... recommended not to use the IStatisticsType directly, but only subtypes of it. The InstanceDeclarations of the IStatisticsType have the Attribute values defined in Table 41 . Table 41 - IStatisticsType Attribute values
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  6.2.2 IAggregateStatisticsType
  BrowseName DataType TypeDefinition Other Subtype of the IStatisticsType defined in 6.2.1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable ResetCondition 0:String 0:PropertyType O ResetCondition describes ... OPERATOR" means, that an operator resets the statistics on a local HMI. The InstanceDeclarations of the IAggregateStatisticsType have the Attribute values defined in Table 44 . Table 44 - IAggregateStatisticsType Attribute
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  6.2.3 IRollingStatisticsType
  BrowseName DataType TypeDefinition Other Subtype of the IStatisticsType defined in 6.2.1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable WindowDuration 0:Duration 0:PropertyType O 0:HasProperty Variable ... WindowNumberOfValues together It shall provide a maximum of one of those Properties . The InstanceDeclarations of the IRollingStatisticsType have the Attribute values defined in Table 46 . Table 46 - IRollingStatisticsType Attribute values
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  7.4.4 ReusableDeviceCalibrationTargetCategoryType ObjectType
  BrowseName DataType TypeDefinition Other Subtype of the ReusableCalibrationTargetCategoryType defined in 7.4.3 , i.e. inheriting the InstanceDeclarations of that Node. This ObjectType does not define any InstanceDeclarations
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  7.4.5 OneTimeCalibrationTargetCategoryType ObjectType
  BrowseName DataType TypeDefinition Other Subtype of the BaseCalibrationTargetCategoryType defined in 7.4.2 , i.e. inheriting the InstanceDeclarations of that Node. This ObjectType does not define any InstanceDeclarations
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  7.4.6 DynamicCalibrationTargetCategoryType ObjectType
  BrowseName DataType TypeDefinition Other Subtype of the BaseCalibrationTargetCategoryType defined in 7.4.2 , i.e. inheriting the InstanceDeclarations of that Node. This ObjectType does not define any InstanceDeclarations . Objects of this ObjectType should
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 10.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 12.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 8.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-10100-1 – OPC UA for WoT Connectivity - Part 1: API Definition
  3.4.1.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 8.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30060 – OPC UA for Tobacco Machine Communication
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30060 – OPC UA for Tobacco Machine Communication
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 14.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this specification is defined in Annex A . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  3.3.3.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  3.3.4.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 14.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30141 – OPC UA for PROFIenergy
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in Annex A. For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30142 – OPC UA for PROFINET Remote IO
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30142 – OPC UA for PROFINET Remote IO
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 13.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  3.5.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  3.5.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 12.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 12.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  3.5.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  3.5.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 11.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  3.4.1.4 Additional Attribute values
  Type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 10.2 . For InstanceDeclarations of NodeClass Objects and Variables that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-34100 – OPC UA for Energy Consumption Management
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-34100 – OPC UA for Energy Consumption Management
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 12.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  3.4.1.4 Additional Attribute Values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in Annex A . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  8.2 IMachineryItemVendorNameplateType
  Other Subtype of the 2:IVendorNameplateType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. Properties of the 2:IVendorNameplateType 0:HasProperty Variable 2:Manufacturer 0:LocalizedText ... this Property . Examples are: "Injection Moulding Machine", "Drilling Machine". The InstanceDeclarations of the IMachineryItemVendorNameplateType have additional Attribute values defined in Table 14 . Table 14 - IMachineryItemVendorNameplateType Attribute
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  8.3 MachineryItemIdentificationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasInterface ObjectType IMachineryItemVendorNameplateType 0:HasInterface ObjectType 2:ITagNameplateType 0:HasProperty Variable ... ITagNameplateType and shall be used as defined by the Interface. The InstanceDeclarations of the MachineryItemIdentificationType have additional Attribute values defined in Table 22 . Table 16 - MachineryItemIdentificationType Attribute Values for Child
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  8.4 IMachineVendorNameplateType
  BrowseName DataType TypeDefinition Other Subtype of the IMachineryItemVendorNameplateType defined in 8.2 , i.e. inheriting the InstanceDeclarations of that Node. Properties of the 2:IVendorNameplateType 0:HasProperty Variable 2:ProductInstanceUri 0:String ... Properties 2:DeviceRevision , 2:RevisionCounter and 2:DeviceManual defined by the 2:IVendorNameplateType. The InstanceDeclarations of the IMachineVendorNameplateType have additional Attribute values defined in Table 18 . Table 18 - IMachineVendorNameplateType Attribute
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  8.5 IMachineTagNameplateType
  Other Subtype of the 2:ITagNameplateType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable Location 0:String 0:PropertyType O, RW Conformance Units ... characters into that field. Examples are "Munich/A2/217", "Area 51". The InstanceDeclarations of the IMachineTagNameplateType have additional Attribute values defined in Table 20 . Table 20 - IMachineTagNameplateType Attribute
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  8.6 MachineIdentificationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the MachineryItemIdentificationType defined in 8.3 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType - 0:HasInterface ObjectType ... Interface. 2:AssetId and 2:ComponentName are also inherited from the MachineryItemIdentificationType. The InstanceDeclarations of the MachineIdentificationType have additional Attribute values defined in Table 22 . Table 22 - MachineIdentificationType Attribute Values
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  10.2 MachineryComponentIdentificationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the MachineryItemIdentificationType defined in 8.3 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType - 0:HasProperty Variable ... Attributes of the Object representing the component shall be used for that purpose. The InstanceDeclarations of the MachineryComponentIdentificationType have additional Attribute values defined in Table 25 . Table 25 - MachineryComponentIdentificationType Attribute
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  11.2 MachineComponentsType ObjectType Definition
  Other Subtype of the 0:BaseObjectType defined in OPC 10000-5 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType - 0:HasComponent Object ... DataType TypeDefinition Others <Component> 0:HasAddIn Object 2:Identification MachineryItemIdentificationType M The InstanceDeclarations of the MachineComponentsType have additional Attribute values defined in Table 28 . Table 28 - MachineComponentsType Attribute
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  12.2 MachineryItemState_StateMachineType
  Other Subtype of the 0:FiniteStateMachineType defined in OPC 10000-16 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType - 0:HasComponent Object ... meaning of the Transitions is defined in the Description of Table 30 . The InstanceDeclarations of the MachineryItemState_StateMachineType have additional Attribute values defined in Table 30 . Table 30 - MachineryItemState_StateMachineType
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  13.2 MachineryOperationModeStateMachineType
  Other Subtype of the 0:FiniteStateMachineType defined in OPC 10000-16 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable 0:DefaultInstanceBrowseName 0:QualifiedName 0:PropertyType - 0:HasComponent Object ... meaning of the Transitions is defined in the Description of Table 33 . The InstanceDeclarations of the MachineryOperationModeStateMachineType have additional Attribute values defined in Table 33 . Table 33 - MachineryOperationModeStateMachineType Attribute Values
• OPC-40001-2 – OPC UA for Machinery - Part 2: Process Values
  6.3 ProcessValueSetpointVariableType
  Figure 2 , illustrates the 3: AnalogSignalVariableType and the ProcessValueSetpointVariableType and their supertypes with key InstanceDeclarations . The 3: AnalogSignalVariableType provides the optional Properties 0: ValuePrecision and 0: InstrumentRange and the mandatory
• OPC-40001-2 – OPC UA for Machinery - Part 2: Process Values
  6.4 ProcessValueType
  ProcessValueType In Figure 3 , the ProcessValueType and its supertypes with key InstanceDeclarations is shown. The mandatory 3: SignalTag contains a unique name as defined by OPC 30081 . The optional
• OPC-40001-2 – OPC UA for Machinery - Part 2: Process Values
  7.1 ProcessValueType ObjectType Definition
  MultiStateValueDiscreteType O Conformance Units Machinery Process Values Base Types This ObjectType inherits the InstanceDeclarations defined on its supertypes, including the mandatory 3: SignalTag as defined in OPC 30081 . The mandatory ... AnalogSignal Variable is overridden and additional InstanceDeclarations are added (see Table 2 ). It contains the process value and meta data about the process value. The 3: AnalogSignalVariableType already provides
• OPC-40001-4 – OPC UA for Machinery - Part 4: Energy Management
  7.3 IVolumeFlowType ObjectType Definition
  Units Machinery Energy Non Electrical Volume Flow This Interface is derived from IBaseFlowType. The InstanceDeclarations shall be used according to that Interface definition. 3:VolumeFlowRate and 3:Volume provide information
• OPC-40001-4 – OPC UA for Machinery - Part 4: Energy Management
  7.4 IMassFlowType ObjectType Definition
  Units Machinery Energy Non Electrical Mass Flow This Interface is derived from IBaseFlowType. The InstanceDeclarations shall be used according to that Interface definition. 3:MassFlowRate and 3:Mass add information
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 11.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions
  6.3.1 Extension of MachineryItemState
  Object 4:FromExecutingToExecuting 0:TransitionType 0:HasComponent Object 4:ExtrusionExecutingSubState ExtrusionExecutingSubState_StateMachineType M The InstanceDeclarations of the ExtrusionMachineryItemState_StateMachineType have additional Attribute values defined in Table 4 Table 4 - ExtrusionMachineryItemState
• OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions
  10.1 Conformance Units
  Category Title Description Server Extrusion Device Supports the ExtrusionDeviceType with all its mandatory InstanceDeclarations . There is at least one instance of the ExtrusionDeviceType or a subtype representing a machine/component ... Dataset Management Supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations . There is the component ProductionDatasetManagement available in the instance of the ExtrusionDeviceType or a subtype
• OPC-40084-2 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 2: Extrusion Line
  10.2.1 Profile list
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the ExtrusionLine_InterfaceType . NOTE
• OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder
  8.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Extruder_InterfaceType . NOTE
• OPC-40084-4 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 4: Haul-off
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the HaulOff_InterfaceType . NOTE
• OPC-40084-5 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 5: Melt pump
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the MeltPump_InterfaceType . NOTE
• OPC-40084-6 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 6: Filter
  9.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Filter_InterfaceType . NOTE
• OPC-40084-7 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 7: Die
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Die_InterfaceType . NOTE
• OPC-40084-8 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 8: Pelletizer
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Pelletizer_InterfaceType NOTE
• OPC-40084-9 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 9: Cutter
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Die_InterfaceType . NOTE
• OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Calibrator_InterfaceType . NOTE
• OPC-40084-11 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 11: Corrugator
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Corrugator_InterfaceType . NOTE
• OPC-40084-12 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 12: Calender
  7.2.2 Server Facets
  server supports the 3: ProductionDatasetManagementType (defined in OPC 40083) with all its mandatory InstanceDeclarations and that there is the component ProductionDatasetManagement available in the instance of the Calender_InterfaceType . NOTE
• OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring
  3.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring
  3.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 14.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-40210 – OPC UA for Geometric Measurement Systems
  4.4.1.4 Additional Attribute values
  type definition table provides columns to specify the values for required Node Attributes for InstanceDeclarations . To provide information about additional Attributes , the format as shown in Table 6 is used
• OPC-40210 – OPC UA for Geometric Measurement Systems
  4.4.2.2 BrowseNames
  NamespaceUri for all BrowseNames defined in this document is defined in 13.2 . For InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.1 PumpType ObjectType Definition
  Other Subtype of the 2:TopologyElementType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object 2:Configuration ConfigurationGroupType O 0:HasComponent Object Documentation DocumentationType ... representation of Pump Ports , such as the inlet, outlet, and drive port. The InstanceDeclarations of the PumpType have additional Attributes defined in Table 10 . Table 10 - PumpType Attribute values
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.2 IPumpVendorNameplateType ObjectType Definition
  Other Subtype of the 3:IMachineVendorNameplateType defined in OPC 40001-1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasProperty Variable ArticleNumber 0:String 0:PropertyType O, RO 0:HasProperty ... PropertyType O, RO 0:HasProperty Variable TypeOfProduct 0:String 0:PropertyType O, RO The InstanceDeclarations of the IPumpVendorNameplateType have additional Attributes defined in Table 12 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.3 MarkingsType ObjectType Definition
  Other Subtype of the 0:FolderType defined in OPC 10000-5 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Marking> 0:FileType OP The InstanceDeclarations
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.4 PumpIdentificationType ObjectType Definition
  Other Subtype of the 3:MachineIdentificationType defined in OPC 40001-1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasInterface ObjectType IPumpVendorNameplateType 0:HasComponent Object Markings MarkingsType O Applied from ... changed to Mandatory and the Value Attribute is set to "Pump". The InstanceDeclarations of the PumpIdentificationType have additional Attributes defined in Table 16 . Table 16 - PumpIdentificationType Attribute values
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.5 DocumentationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Arrangements - 0:FileType O 0:HasComponent Variable ArrangementsLink ... FileType O 0:HasComponent Variable UnitMaintenanceReportLink 0:String 0:DataItemType O, RO The InstanceDeclarations of the DocumentationType have additional Attributes defined in Table 18 . The Variables and the associated Descriptions
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.6 MaintenanceGroupType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object BreakdownMaintenance BreakdownMaintenanceType O 0:HasComponent Object ConditionBasedMaintenance ConditionBasedMaintenanceType ... HasComponent Object GeneralMaintenance GeneralMaintenanceType O 0:HasComponent Object PreventiveMaintenance PreventiveMaintenanceType O The InstanceDeclarations of the MaintenanceGroupType have additional Attributes defined in Table 20 . Table 20 - MaintenanceGroupType Attribute values for child
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.7 GeneralMaintenanceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ActiveMaintenanceTime 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable UpTime 0:Double 0:BaseAnalogType O, RO The InstanceDeclarations of the GeneralMaintenanceType have additional Attributes defined in Table 22 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.8 ConditionBasedMaintenanceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable Availability 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable TimeBasedAvailability 0:Double 0:BaseAnalogType O, RO The InstanceDeclarations of the ConditionBasedMaintenanceType have additional Attributes defined in Table 24 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.9 PreventiveMaintenanceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ActivePreventiveMaintenanceTime 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... DataItemType O, RW 0:HasComponent Variable PreventiveMaintenanceTime 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the PreventiveMaintenanceType have additional Attributes defined in Table 26 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.10 BreakdownMaintenanceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable CorrectiveMaintenanceTime 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable Severity 0:String 0:DataItemType O, RO The InstanceDeclarations of the PreventiveMaintenanceType have additional Attributes defined in Table 28 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.11 SupervisionType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object SupervisionAuxiliaryDevice SupervisionAuxiliaryDeviceType O 0:HasComponent Object SupervisionElectronics SupervisionElectronicsType ... HasComponent Object SupervisionPumpOperation SupervisionPumpOperationType O 0:HasComponent Object SupervisionSoftware SupervisionSoftwareType O The InstanceDeclarations of the SupervisionType have additional Attributes defined in Table 30 . Table 30 - SupervisionType Attribute values for child
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.12 SupervisionMechanicsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable AxialBearingAbrasion 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionMechanicsType have additional Attributes defined in Table 32 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.13 SupervisionHardwareType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable Communication 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionHardwareType have additional Attributes defined in Table 34 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.14 SupervisionSoftwareType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable Application 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionSoftwareType have additional Attributes defined in Table 36 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.15 SupervisionProcessFluidType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable Blockage 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionProcessFluidType have additional Attributes defined in Table 38 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.16 SupervisionPumpOperationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable AccessoryLiquidFlow 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionPumpOperationType have additional Attributes defined in Table 40 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.17 SupervisionAuxiliaryDeviceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ActuatorElement 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionAuxiliaryDeviceType have additional Attributes defined in Table 42 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.18 SupervisionElectronicsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ArmatureCircuit 0:Boolean 0:TwoStateDiscreteType O, RO 0:HasComponent ... GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100 The InstanceDeclarations of the SupervisionElectronicsType have additional Attributes defined in Table 44 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.19 ConfigurationGroupType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Design DesignType O 0:HasComponent Object Implementation ImplementationType ... HasComponent Object SystemRequirements SystemRequirementsType O The InstanceDeclarations of the ConfigurationGroupType have additional Attributes defined in Table 46 . Table 46 - ConfigurationGroupType Attribute values for child Nodes BrowsePath Description Attribute Design Static
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.20 DesignType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable AdditionalFieldbuses 0:String [128] 0:DataItemType ... Variable PossibleFluids is a one dimensional array without a limit for possible entries. The InstanceDeclarations of the DesignType have additional Attributes defined in Table 48 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.21 SystemRequirementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable CompressionRatio 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... BaseAnalogType O, RW 0:HasComponent Variable WorkingTemperature 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the SystemRequirementsType have additional Attributes defined in Table 50 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.22 ImplementationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable AtmosphericPressure 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... BaseAnalogType O, RW 0:HasComponent Variable VolumetricEfficiency 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the ImplementationType have additional Attributes defined in Table 52 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.23 OperationalGroupType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object BypassActuation ActuationType O 0:HasComponent Object Control ControlType ... HasComponent Object Signals SignalsType O 0:HasComponent Object ThrottleValveActuation ActuationType O The InstanceDeclarations of the OperationalGroupType have additional Attributes defined in Table 54 . Table 54 - OperationalGroupType Attribute values for child
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.24 ControlType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable CommandVariable 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... BaseAnalogType O, RW 0:HasComponent Variable ReferenceVariable 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the ControlType have additional Attributes defined in Table 56 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.25 ActuationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType PumpActuationType Defined in 7.26 0:HasComponent Variable FaultAction ... AnalogUnitType O, RO 0:HasComponent Variable Status 0:Boolean 0:TwoStateDiscreteType O, RO The InstanceDeclarations of the ActuationType have additional Attributes defined in Table 58 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.26 PumpActuationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ActuationType defined in 7.25 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ActualControlMode ControlModeEnum 0:DataItemType O, RO 0:HasComponent Variable ... Variable SetOperationMode OperationModeEnum 0:DataItemType O, RW 0:HasComponent Object VentValveRequest DiscreteOutputObjectType O The InstanceDeclarations of the PumpActuationType have additional Attributes defined in Table 60 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.27 DiscreteObjectType ObjectType Definition
  BaseAnalogType O, RO 0:HasComponent Variable Status 0:Boolean 0:TwoStateDiscreteType O, RO The InstanceDeclarations of the DiscreteObjectType have additional Attributes defined in Table 62 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.28 DiscreteInputObjectType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DiscreteObjectType defined in 7.27 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable DiscreteInputValue 0:Boolean 0:TwoStateDiscreteType M, RO The InstanceDeclarations
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.29 DiscreteOutputObjectType ObjectType Definition
  DataType TypeDefinition Other Subtype of the DiscreteObjectType defined in 7.27 0 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType PumpKickObjectType Defined in 7.30 0:HasComponent Variable DiscreteOutputValue ... TwoStateDiscreteType O, RW 0:HasComponent Variable FaultValue 0:Boolean 0:TwoStateDiscreteType O, RW The InstanceDeclarations of the DiscreteOutputObjectType have additional Attributes defined in Table 66 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.30 PumpKickObjectType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DiscreteOutputObjectType defined in 7.29 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable PumpKickMode PumpKickModeEnum 0:DataItemType O, RW 0:HasComponent Variable ... DataItemType O, RW 0:HasComponent Variable PumpKickTimeDifference 0:Double 0:AnalogUnitType O, RW The InstanceDeclarations of the PumpKickObjectType have additional Attributes defined in Table 68 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.31 SignalsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Acceleration DiscreteInputObjectType O 0:HasComponent Object CleanValveOpen DiscreteInputObjectType ... HasComponent Object TargetSpeed DiscreteInputObjectType O 0:HasComponent Object VentValveOpen DiscreteInputObjectType O The InstanceDeclarations of the SignalsType have additional Attributes defined in Table 70 . The Variables and the associated Descriptions
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.32 MeasurementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Vibration> VibrationMeasurementType OP 0:HasComponent Variable AmbientHumidity ... VolumetricEfficiency 0:HasProperty Variable KindOfQuantity 0:String 0:PropertyType O, RO The InstanceDeclarations of the MeasurementsType have additional Attributes defined in Table 73 . The Variables and the associated Descriptions
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.33 VibrationMeasurementType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable 1XPhase 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable VibrationAmplitudeAtTheSidebandsOfTheGearMeshingFrequencyPerG 0:Double 0:BaseAnalogType O, RO The InstanceDeclarations of the VibrationMeasurementType have additional Attributes defined in Table 75 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.34 MultiPumpType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable DistributionPriority 0:String [] 0:DataItemType O, RW 0:HasComponent ... RedundantPumpIDs, and DistributionPriority are one dimensional arrays without a limit for possible entries. The InstanceDeclarations of the MultiPumpType have additional Attributes defined in Table 77 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.35 PortsGroupType ObjectType Definition
  Other Subtype of the 2: FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Drive> DrivePortType OP 0:HasComponent Object ... InletConnection> InletConnectionPortType OP 0:HasComponent Object <OutletConnection> OutletConnectionPortType OP The InstanceDeclarations of the PortsGroupType have additional Attributes defined in Table 79 . Table 79 - PortsGroupType Attribute values
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.36 PortType ObjectType Definition
  DataItemType O, RW 0:HasComponent Variable IdCarrier 0:String 0:DataItemType O, RW The InstanceDeclarations of the PortType have additional Attributes defined in Table 81 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.37 DrivePortType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the PortType defined in 7.36 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Design DriveDesignType O 0:HasComponent Object Measurements DriveMeasurementsType ... InstanceDeclarations of the DrivePortType have additional Attributes defined in Table 83 . Table 83 - DrivePortType Attribute values for child Nodes BrowsePath Description Attribute Design Manufacturer's properties that describe the rudimentary
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.38 InletConnectionPortType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the PortType defined in 7.36 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Design InletConnectionDesignType O 0:HasComponent Object Implementation InletConnectionImplementationType ... HasComponent Object Measurements InletConnectionMeasurementsType O 0:HasComponent Object SystemRequirements InletConnectionSystemRequirementsType O The InstanceDeclarations of the InletConnectionPortType have additional Attributes defined in Table 85 . Table 85 - InletConnectionPortType Attribute values for child
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.39 OutletConnectionPortType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the PortType defined in 7.36 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Design OutletConnectionDesignType O 0:HasComponent Object Implementation OutletConnectionImplementationType ... HasComponent Object Measurements OutletConnectionMeasurementsType O 0:HasComponent Object SystemRequirements OutletConnectionSystemRequirementsType O The InstanceDeclarations of the OutletConnectionPortType have additional Attributes defined in Table 87 . Table 87 - OutletConnectionPortType Attribute values for child
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.40 ConnectionDesignType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType InletConnectionDesignType Defined in 7.41 0:HasSubtype ObjectType OutletConnectionDesignType Defined ... HasComponent Variable NominalPressure 0:String 0:DataItemType O, RO The InstanceDeclarations of the ConnectionDesignType have additional Attributes defined in Table 89 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.41 InletConnectionDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConnectionDesignType defined in 7.40 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable CriticalBackingPressure 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable WaterVaporCapacity 0:Double 0:BaseAnalogType O, RO The InstanceDeclarations of the InletConnectionDesignType have additional Attributes defined in Table 91 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.42 OutletConnectionDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConnectionDesignType defined in 7.40 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable MaximumAllowableOutletPressure 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... BaseAnalogType O, RO 0:HasComponent Variable ReliefValveSetPressure 0:Double 0:BaseAnalogType O, RO The InstanceDeclarations of the OutletConnectionDesignType have additional Attributes defined in Table 93 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.44 InletConnectionSystemRequirementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable InletPressure 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.45 OutletConnectionSystemRequirementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable BackingPressure 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.46 ConnectionImplementationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType InletConnectionImplementationType Defined in 7.47 0:HasSubtype ObjectType OutletConnectionImplementationType Defined ... HasComponent Variable NominalSize 0:String 0:DataItemType O, RW The InstanceDeclarations of the ConnectionImplementationType have additional Attributes defined in Table 101 . The Variables and the associated Descriptions are based
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.47 InletConnectionImplementationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConnectionImplementationType defined in 7.46 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable HeightOfTheInletConnection 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... BaseAnalogType O, RW 0:HasComponent Variable TotalHeadAtInletAreaOfThePump 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the InletConnectionImplementationType have additional Attributes defined in Table 103 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.48 OutletConnectionImplementationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConnectionImplementationType defined in 7.46 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable HeightOfTheOutletConnection 0:Double 0:BaseAnalogType O, RW 0:HasComponent ... BaseAnalogType O, RW 0:HasComponent Variable TotalHeadAtOutletAreaOfThePump 0:Double 0:BaseAnalogType O, RW The InstanceDeclarations of the OutletConnectionImplementationType have additional Attributes defined in Table 105 . The Variables and the associated
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.49 DriveMeasurementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable Current 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... Voltage 0:HasProperty Variable KindOfQuantity 0:String 0:PropertyType O, RO The InstanceDeclarations of the DriveMeasurementsType have additional Attributes defined in Table 108 . The Variables and the associated Descriptions
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.50 InletConnectionMeasurementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable InletTemperatureOfThePump 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... MeanVelocityAtInlet 0:HasProperty Variable KindOfQuantity 0:String 0:PropertyType O, RO The InstanceDeclarations of the InletConnectionMeasurementsType have additional Attributes defined in Table 111 . The Variables and the associated Descriptions
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  7.51 OutletConnectionMeasurementsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100 , i.e. inheriting the InstanceDeclarations of that Node. 0: HasComponent Variable MeanVelocityAtOutlet 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... OutletTemperatureOfThePump 0:HasProperty Variable KindOfQuantity 0:String 0:PropertyType O, RO The InstanceDeclarations of the OutletConnectionMeasurementsType have additional Attributes defined in Table 114 . The Variables and the associated Descriptions
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.1 CASType ObjectType Definition
  System . The optional Object MCS is the representation of the Main Control System . The InstanceDeclarations of the CASType have additional Attributes defined in Table 12 . Table 12 - CASType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.2 AirnetsType ObjectType Definition
  Other Subtype of the 4:MachineComponentsType defined in OPC 40001-1 , i.e. inheriting the InstanceDeclarations of that Node. The following nodes override nodes added by the 4:MachineComponentsType 0:HasProperty ... QualifiedName 0:PropertyType 0:HasComponent Object 4:<Component> AirnetType OP The InstanceDeclarations of the AirnetsType have additional Attributes defined in Table 14 . Table 14 - AirnetsType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.3 ComponentsGroupType ObjectType Definition
  Other Subtype of the 4:MachineComponentsType defined in OPC 40001-1 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <ComponentsGroup> 4:MachineComponentsType OP 0:HasComponent Object ... Components . It also allows adding concrete Component groups not defined by this specification. The InstanceDeclarations of the ComponentsGroupType have additional Attributes defined in Table 16 . Table 16 - ComponentsGroupType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.4 AirnetType ObjectType Definition
  Other Subtype of the 2:TopologyElementType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Ambient FluidQuantitiesType O 0:HasComponent Object 4:Components AirnetComponentsType ... Quantities for the process fluids inlets, outlets, and delta of an Airnet . The InstanceDeclarations of the AirnetType have additional Attributes defined in Table 18 . Table 18 - AirnetType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.5 AirnetComponentsType ObjectType Definition
  ComponentsGroup> allows adding concrete Component groups not defined by this specification. The InstanceDeclarations of the AirnetComponentsType have additional Attributes defined in Table 20 . Table 20 - AirnetComponentsType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.6 MCSType ObjectType Definition
  Other Subtype of the 2:TopologyElementType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Analyses AnalysesType O 0:HasComponent Object 2:Configuration MCSConfigurationType ... provides Variables for statistical applications of the Main Control System , such as counters. The InstanceDeclarations of the MCSType have additional Attributes defined in Table 22 . Table 22 - MCSType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.7 CASComponentType ObjectType Definition
  Other Subtype of the 2:TopologyElementType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType ChargingSystemType Defined in 7.8 0:HasSubtype ObjectType CompressorType Defined ... Operational 0:HasComponent Variable OperatingState OperatingStateEnum 0:DataItemType O, RO The InstanceDeclarations of the CASComponentType have additional Attributes defined in Table 25 . Table 25 - CASComponentType Attribute values for child Nodes
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.9 CompressorType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the CASComponentType defined in 7.7 , i.e. inheriting the InstanceDeclarations of that Node. The following nodes override nodes added by the CASComponentType 0:HasComponent Object ... HasComponent Object 2:Operational CompressorOperationalType O 0:HasComponent Object 2:Statistics CompressorStatisticsType O The InstanceDeclarations of the CompressorType have additional Attributes defined in Table 28 . Table 28 - CompressorType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.12 DrainType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the CASComponentType defined in 7.7 , i.e. inheriting the InstanceDeclarations of that Node. The following nodes override nodes added by the CASComponentType 0:HasComponent Object ... mandatory and its Value Attribute shall match the value stated in Table 9 . The InstanceDeclarations of the DrainType have additional Attributes defined in Table 32 . Table 32 - DrainType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.17 SensorType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the CASComponentType defined in 7.7 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object Calibration CalibrationType O 0:HasComponent Object 2:Maintenance MaintenanceType ... Operational 0:HasComponent Variable <Quantity> 0:Number 0:BaseAnalogType OP, RO The InstanceDeclarations of the SensorType have additional Attributes defined in Table 39 . Table 39 - SensorType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.18 SeparatorType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the CASComponentType defined in 7.7 , i.e. inheriting the InstanceDeclarations of that Node. The following nodes override nodes added by the CASComponentType 0:HasComponent Object ... mandatory and its Value Attribute shall match the value stated in Table 9 . The InstanceDeclarations of the SeparatorType have additional Attributes defined in Table 41 . Table 41 - SeparatorType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.20 ElectricalQuantitiesType ObjectType Definition
  defined by the IStatisticsType and shall be used as defined by the Interface. The InstanceDeclarations of the ElectricalQuantitiesType have additional Attributes defined in Table 44 . Table 44 - ElectricalQuantitiesType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.21 ElectricalCircuitType ObjectType Definition
  used to add manufacturer or system specific groups to an electrical circuit. The InstanceDeclarations of the ElectricalCircuitType have additional Attributes defined in Table 46 . Table 46 - ElectricalCircuitType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.22 FluidQuantitiesType ObjectType Definition
  abstract DataType . The TypeDefinition may be chosen from BaseAnalogType and its subtypes. The InstanceDeclarations of the FluidQuantitiesType have additional Attributes defined in Table 48 . Table 48 - FluidQuantitiesType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.23 ParticleType ObjectType Definition
  BaseAnalogType M, RO 0:HasComponent Variable Medium 0:UInt64 0:BaseAnalogType M, RO The InstanceDeclarations of the ParticleType have additional Attributes defined in Table 50 . Table 50 - ParticleType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.24 FluidCircuitType ObjectType Definition
  used to add manufacturer or system specific groups to a fluid circuit. The InstanceDeclarations of the FluidCircuitType have additional Attributes defined in Table 52 . Table 52 - FluidCircuitType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.25 AnalysisType ObjectType Definition
  Variables or Properties to the new subtype to represent the parameters. The InstanceDeclarations of the AnalysisType have additional Attributes defined in Table 54 . Table 54 - AnalysisType Attribute values for child
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.26 AnalysesType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Analysis> AnalysisType OP 0:HasComponent Object ... parameterization for this analysis should be provided on the Main Control System . The InstanceDeclarations of the AnalysesType have additional Attributes defined in Table 57 . Table 57 - AnalysesType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.27 CalibrationType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable LastCalibrationDate 0:DateTime 0:DataItemType M, RO 0:HasComponent ... Variable NextCalibrationDate 0:DateTime 0:DataItemType M, RO The InstanceDeclarations of the CalibrationType have additional Attributes defined in Table 59 . Table 59 - CalibrationType Attribute values for child Nodes Source Path
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.30 AirnetConfigurationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConfigurationType defined in 7.28 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable OperatingModes 0:UInt16 0:MultiStateDiscreteType O, RW 0:HasComponent ... profile, which change the operating mode and/or other parameters depending on the weekday. The InstanceDeclarations of the AirnetConfigurationType have additional Attributes defined in Table 63 . Table 63 - AirnetConfigurationType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.31 MCSConfigurationType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the ConfigurationType defined in 7.28 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object CommunicationSettings CommunicationSettingsType O 0:HasComponent Object ConfigurationFile 0:FileType ... configuration from the Main Control System and store it in the ConfigurationFile Object . The InstanceDeclarations of the MCSConfigurationType have additional Attributes defined in Table 65 . Table 65 - MCSConfigurationType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.32 CommunicationSettingsType ObjectType Definition
  BaseDataVariableType O, RO 0:HasProperty Variable SubnetMask 0:String 0:PropertyType O, RO The InstanceDeclarations of the CommunicationSettingsType have additional Attributes defined in Table 69 . Table 69 - CommunicationSettingsType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.33 DesignType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node 0:HasSubtype ObjectType CompressorDesignType Defined in 7.34 0:HasSubtype ObjectType ConverterDesignType Defined ... Defined in 7.42 0:HasComponent Variable ComponentClass 0:Enumeration 0:DataItemType O, RO The InstanceDeclarations of the DesignType have additional Attributes defined in Table 71 . Table 71 - DesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.34 CompressorDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable DisplacementType DisplacementTypeEnum 0:DataItemType O, RO 0:HasComponent Variable ... components of the DesignType 0:HasComponent Variable ComponentClass CompressorTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the CompressorDesignType have additional Attributes defined in Table 73 . Table 73 - CompressorDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.35 ConverterDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node The following nodes override properties and components of the DesignType 0:HasComponent ... Variable ComponentClass ConverterTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the ConverterDesignType have additional Attributes defined in Table 75 . Table 75 - ConverterDesignType Attribute values for child Nodes Source Path Description
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.36 DrainDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node The following nodes override properties and components of the DesignType 0:HasComponent ... Variable ComponentClass DrainTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the DrainDesignType have additional Attributes defined in Table 77 . Table 77 - DrainDesignType Attribute values for child Nodes Source Path Description
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.37 DryerDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable LowestAmbientTemperature 0:Double 0:BaseAnalogType O, RO The following ... components of the DesignType 0:HasComponent Variable ComponentClass DryerTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the DryerDesignType have additional Attributes defined in Table 79 . Table 79 - DryerDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.38 FilterDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable FilterClass FilterClassDataType 0:DataItemType O, RO The following nodes ... components of the DesignType 0:HasComponent Variable ComponentClass FilterTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the FilterDesignType have additional Attributes defined in Table 81 . Table 81 - FilterDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.39 ReceiverDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node The following nodes override properties and components of the DesignType 0:HasComponent ... DataItemType O, RO 0:HasComponent Variable Volume 0:Double 0:AnalogUnitType O, RO The InstanceDeclarations of the ReceiverDesignType have additional Attributes defined in Table 83 . Table 83 - ReceiverDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.40 SensorDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable SensorTechnology SensorTechnologyOptionSet 0:DataItemType O, RO 0:HasComponent Variable ... components of the DesignType 0:HasComponent Variable ComponentClass SensorTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the SensorDesignType have additional Attributes defined in Table 85 . Table 85 - SensorDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.41 SeparatorDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node The following nodes override properties and components of the DesignType 0:HasComponent ... Variable ComponentClass SeparatorTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the SeparatorDesignType have additional Attributes defined in Table 87 . Table 87 - SeparatorDesignType Attribute values for child Nodes Source Path Description
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.42 ValveDesignType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the DesignType defined in 7.33 , i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable NumberOfPorts 0:UInt16 0:DataItemType O, RO The following ... components of the DesignType 0:HasComponent Variable ComponentClass ValveTypeEnum 0:DataItemType O, RO The InstanceDeclarations of the ValveDesignType have additional Attributes defined in Table 89 . Table 89 - ValveDesignType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.43 EventsType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Object <Event> 0:ConditionType OP 0:HasComponent Object ... concrete subtype of the abstract ConditionType has to be used as TypeDefinition. The InstanceDeclarations of the EventsType have additional Attributes defined in Table 91 . Table 91 - EventsType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.44 MaintenanceType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node 0:HasComponent Variable RealTimeSinceLastService 0:Double 0:BaseAnalogType M, RO 0:HasComponent ... Variable RealTimeToNextService 0:Double 0:BaseAnalogType M, RO The InstanceDeclarations of the MaintenanceType have additional Attributes defined in Table 94 . Table 94 - MaintenanceType Attribute values for child Nodes Source Path
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.45 OperationalType ObjectType Definition
  Other Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node. 0:HasSubtype ObjectType AirnetOperationalType Defined in 7.46 0:HasSubtype ObjectType CompressorOperationalType Defined ... CASPart specific concrete DataType or one of the general DataTypes HealthStateEnum, IntegratedStateEnum, OperatingStateEnum. The InstanceDeclarations of the OperationalType have additional Attributes defined in Table 96 . Table 96 - OperationalType Attribute values
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.46 AirnetOperationalType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the OperationalType defined in 7.45 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable AirDeliveryRate 0:Double 0:BaseAnalogType O, RO 0:HasComponent ... OperationalType should not be used for an instance of this AirnetOperationalType. The InstanceDeclarations of the AirnetOperationalType have additional Attributes defined in Table 98 . Table 98 - AirnetOperationalType Attribute values for child
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  7.47 CompressorOperationalType ObjectType Definition
  BrowseName DataType TypeDefinition Other Subtype of the OperationalType defined in 7.45 , i.e. inheriting the InstanceDeclarations of that Node. 0:HasComponent Variable ActivePressureBand 0:UInt16 0:DataItemType O, RO 0:HasComponent ... actual state machines may function. Figure 32 - CompressorOperationalType State Machine Illustration The InstanceDeclarations of the CompressorOperationalType have additional Attributes defined in Table 100 . Table 100 - CompressorOperationalType Attribute values for child