The SupervisionPumpOperationType provides Variables used for monitoring the Pump operation. It is formally defined in Table 39. For the generation of events, the SupervisionPumpOperationType has references to the four Namur NE 107 statuses defined in OPC 10000-100. The InputNode Property of the Alarm shall contain the NodeId of the Component.
Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node.
0:HasComponent
Variable
AccessoryLiquidFlow
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
AccessoryLiquidHigh
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
AccessoryLiquidLow
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
AccessoryLiquidOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
AccessoryLiquidPressure
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
AmbientTemperature
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
CaseOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
ControllerOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
ConverterOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
CoolantFlow
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
CoolantHigh
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
CoolantLow
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
CoolantOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
Deceleration
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
DirtyImpeller
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
DriveOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
GeneratorOperation
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
Leakage
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
Lubricant
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
MaximumNumberStarts
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
MaximumOperationTime
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
MaximumStartsAtTime
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
MotorHumidity
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
MotorOverheat
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
OperationFault
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
OverLoad
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
OverSpeed
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
PartialLoad
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
Synchronisation
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
TemperatureFault
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
TimeOut
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
TMSFailure
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
TorqueLimit
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
TurbineOperation
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
UnderSpeed
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
VelocityLimit
0:Boolean
0:TwoStateDiscreteType
O, RO
0:HasComponent
Variable
WearReserveExhausted
0:Boolean
0:TwoStateDiscreteType
O, RO
0:GeneratesEvent
ObjectType
2:CheckFunctionAlarmType
Defined in OPC 10000-100
0:GeneratesEvent
ObjectType
2:FailureAlarmType
Defined in OPC 10000-100
0:GeneratesEvent
ObjectType
2:MaintenanceRequiredAlarmType
Defined in OPC 10000-100
0:GeneratesEvent
ObjectType
2:OffSpecAlarmType
Defined in OPC 10000-100
The InstanceDeclarations of the SupervisionPumpOperationType have additional Attributes defined in Table 40. The Variables and the associated Descriptions are based on the standard VDMA 24223-1.
Table 40 – SupervisionPumpOperationType Attribute values for child Nodes
BrowsePath
Description Attribute
AccessoryLiquidFlow
This attribute indicates a problem with the accessory liquid flow, e.g. the buffer fluid flow or operating fluid flow.
AccessoryLiquidHigh
This attribute indicates a high limited accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidLow
This attribute indicates a low limited accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidOverheat
This attribute indicates an overheating of the accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidPressure
This attribute indicates an abnormal pressure of the accessory liquid, e.g. the buffer fluid pressure or operating fluid pressure.
AmbientTemperature
This attribute indicates an abnormal ambient temperature.
CaseOverheat
This attribute indicates an overheating of the case.
ControllerOverheat
This attribute indicates an overheating of a controller.
ConverterOverheat
This property indicates an overheating of a converter.
CoolantFlow
This attribute indicates a problem with the coolant flow.
CoolantHigh
This attribute indicates that the coolant is high limited.
CoolantLow
This attribute indicates that the coolant is low limited.
CoolantOverheat
This attribute indicates an overheating of the coolant liquid.
Deceleration
This attribute indicates a deceleration of a pump.
DirtyImpeller
This attribute indicates a dirty impeller.
DriveOverheat
This attribute indicates an overheating of a drive.
GeneratorOperation
This attribute indicates that the pump is working as a generator (in flow).
Leakage
This attribute indicates a leakage problem, e.g. leakage of the mechanical seal.
Lubricant
This attribute indicates a problem with the lubricant.
MaximumNumberStarts
This attribute indicates that the maximum number of pump start cycles is exceeded.
MaximumOperationTime
This attribute indicates that the maximum time of pump operation is exceeded.
MaximumStartsAtTime
This attribute indicates that the maximum number of pump start cycles per timespan is exceeded.
MotorHumidity
This attribute indicates unacceptable humidity in the motor.
MotorOverheat
This attribute indicates an overheating of a motor.
OperationFault
This attribute indicates a generic operation problem of a pump.
OverLoad
This attribute indicates an over load.
OverSpeed
This attribute indicates that the pump operates over normal speed.
PartialLoad
This attribute indicates a partial load.
Synchronisation
This attribute indicates a synchronization problem of a pump.
TemperatureFault
This attribute indicates a generic temperature problem of a pump.
TimeOut
This attribute indicates a start up time out.
TMSFailure
This attribute indicates a failure of the temperature management system.
TorqueLimit
This attribute indicates a limitation problem of a pump.
TurbineOperation
This attribute indicates that the pump is working as a turbine (reverse flow).
UnderSpeed
This attribute indicates that the pump operates under normal speed.
VelocityLimit
This attribute indicates a limitation problem of a pump.
WearReserveExhausted
This attribute indicates that the wear reserve of the pump is exhausted.
