This section defines the corresponding ConformanceUnits for the OPC UA Information Model for Machine Tools.
Table 120 – ConformanceUnits for Machine Tools
|
Category |
Title |
Description |
|
Server |
MachineTool MachineToolType Mandatory Nodes |
[Contains deprecated Nodes] All nodes declared as mandatory in the MachineToolType are available in the AddressSpace. The nodes declared as optional may be included in the AddressSpace. |
|
Server |
MachineTool Monitoring Basic - Stacklight |
All available stacklights on the machine tool are modelled in the AddressSpace using the 4:BasicStacklightType. |
|
Server |
MachineTool Monitoring Basic - PowerOnDuration |
[DEPRECATED] The Variable PowerOnDuration is available in the AddressSpace. |
|
Server |
MachineTool Monitoring Machinery PowerOnDuration |
The Variable 2:PowerOnDuration is available in the AddressSpace. |
|
Server |
MachineTool Monitoring Basic - Channels |
All available channels on the machine tool are modelled using the ChannelMonitoringType or CombinedChannelMonitoringType and all its mandatory subcomponents. The channels can optionally include the optional subcomponents. |
|
Server |
MachineTool Production Basic |
[DEPRECATED] The ProductionActiveProgramType is available in the AddressSpace as a Component of the Production Node in the MachineToolType. This node has to include all mandatory components of the ProductionActiveProgramType and may include the optional components. The StateMachine of the ProductionActiveProgramType does not have to send out TransitionEvents. The ProductionActiveProgramType shall relate to the correct job, if a job is modelled in the ProductionPlan Node. |
|
Server |
MachineTool Identification SoftwareInformation |
All nodes declared as mandatory in the SoftwareIdentificationType are available in the AddressSpace. The nodes declared as optional may be included in the AddressSpace. |
|
Server |
MachineTool Identification Machinery additional |
The Properties 2:ComponentName, 2:Model, 3:YearOfConstruction, 3:MonthOfConstruction and 2:DeviceClass shall be available in the 2:Identification node of 3:MachineryItemIdentificationType. They are used as defined in the 3:MachineIdentificationType in OPC 40001-1. |
|
Server |
MachineTool Monitoring WorkingUnit |
All elements fitting the WorkingUnitMonitoringType subtypes defined in this specification physically available on the machine tool are modelled in the AddressSpace using the respective subtypes of the WorkingUnitMonitoringType. |
|
Server |
MachineTool Equipment ToolIdentification |
The Tools component of the EquipmentType is available in the AddressSpace and contains a list of all physically available tools in the machine tool. |
|
Server |
MachineTool Equipment Dynamic Tool List |
In the Tools List, BaseToolType subtype nodes are added/deleted during runtime by the underlying logic of the server. The 0:NodeVersion attribute of Tools is available and the 0:GeneralModelChangeEvent is sent every time the node structure changes. |
|
Server |
MachineTool Notification – Errors and Alerts |
All errors and warnings shown to the machine operator by the machine tool shall be sent via the MachineTool interface. This shall happen using the EventType defined by this specification fitting the best or a subtype of it. The EventNotifier shall be the Messages Object of the MonitoringType, this Object shall be present in the AddressSpace. |
|
Server |
MachineTool Production Job |
[DEPRECATED] The ProductionPlan Node is available in the AddressSpace. At least one ProductionJobType instance is available in the AddressSpace as a Component of the ProductionPlan Node in the MachineToolType. This node has to include all mandatory components of the ProductionJobType and may include the optional components. |
|
Server |
MachineTool Production LastTransition |
[DEPRECATED] The Component 0:LastTransition of the ProductionStateMachineType and their derived types is available in all instances as specified in this CS. |
|
Server |
MachineTool Production ProductionJobStateMachineType |
[DEPRECATED] The ProductionJobTransitionEventType shall be sent for each transition of the ProductionJobStateMachineType. |
|
Server |
MachineTool Production ProductionProgramStateMachineType |
[DEPRECATED] The ProductionProgramTransitionEventType shall be sent for each transition of the ProductionProgramStateMachineType. |
|
Server |
MachineTool Production ProductionPartStateMachineType |
[DEPRECATED] The ProductionPartTransitionEventType shall be sent for each transition of the ProductionPartStateMachineType. |
|
Server |
MachineTool Production InterruptionConditionType |
[Contains deprecated Nodes] For all interruptions of the production job where a reason is known to the machine tool, the InterruptionConditionType shall be sent. It is sent by the instance node of the ProductionJobType where the interruption occurred. The Properties 0:ConditionClassId and 0:ConditionClassName are set to the 0:BaseConditionClassType subtype fitting the best to the reason for the interruption. |
|
Server |
MachineTool Equipment ToolLife |
The Component ToolLife has to be present for every tool. Within ToolLife, at least one ToolLifeEntry has to be provided. |
|
Server |
MachineTool PrognosisType |
The Notification component of the MachineToolType shall contain the Prognoses object. The PrognosisType 8.6.4 is the most basic prognosis type and the supertype to more specific prognosis types. At least one of the PrognosisType subtypes defined in this specification is required for the Prognoses Facet. If the respective prognosis can be given, it shall be referenced as a component by the Prognoses Object in the Notification component of the MachineToolType. If the PrognosisType subtype refers to a node in the AddressSpace via a 0:NodeId and the respective node exists in the AddressSpace, the respective Component of the PrognosisType shall be present. |
|
Server |
MachineTool Prognoses Dynamic List |
In the Prognoses List, PrognosisType nodes are added/deleted during runtime by the underlying logic of the server. The 0:NodeVersion attribute of Prognoses is available and the 0:GeneralModelChangeEvent is sent every time the node structure changes. |
|
Server |
MachineTool Production Dynamic Job List |
[DEPRECATED] The ProductionPlan Node is available in the AddressSpace. In the ProductionPlan, ProductionJobType nodes are added/deleted during runtime by the underlying logic of the server. The 0:NodeVersion attribute of the ProductionPlan is available and the 0:GeneralModelChangeEvent is sent every time the node structure changes. |
|
Server |
MachineTool Production Job Available |
[DEPRECATED] Either the CU Machine Tool Production Job or the CU MachineTool Production Dynamic Job List shall be supported. |
|
Server |
MachineTool Monitor Items Min |
Supports to monitor all exposed instances of Variables and Objects that have the EventNotifier set, that are defined in the MachineTool specification in a Subscription. The server should support at least 20 MonitoredItems for at least one Subscription and one Session. The server may set the revisedPublishingInterval as appropriate. |
|
Server |
MachineTool Monitor Items |
Supports to monitor all exposed instances of Variables and Objects that have the EventNotifier set, that are defined in the MachineTool specification in a Subscription. The resulting maximum number of possible MonitoredItems has to be supported for at least half (at least one) of the required Subscriptions for half (at least one) of the required Sessions. The server may set the revisedPublishingInterval as appropriate. |
|
Server |
MachineTool Event Propagation |
When Events are generated by a node, all nodes connected with inverse hierarchical References that have SubscribeToEvents set in the EventNotifier Attribute, shall also generate the Event. This propagates over all inverse hierarchical References up to the instance of MachineToolType. Each instance of MachineToolType shall have SubscribeToEvents set in the EventNotifier Attribute and thus propagate all Events generated by nodes aggregated by this instance. |
|
Server |
MachineTool Event Tools |
All instances of ToolListType shall have SubscribeToEvents set in the EventNotifier Attribute. |
|
Server |
MachineTool Event Production |
[DEPRECATED] All instances of ProductionStateMachine and its subtypes, ProductionJobType and ProductionJobListType shall have SubscribeToEvents set in the EventNotifier Attribute. |
|
Server |
MachineTool Event Messages |
The Messages node shall have SubscribeToEvents set in the EventNotifier Attribute. |
|
Server |
MachineTool Event Prognoses |
All instances of PrognosisListType shall have SubscribeToEvents set in the EventNotifier Attribute. |
|
Server |
MachineTool Monitoring Obligation |
Instances of MachineToolType shall provide the component Obligation of ObligationType. This is provided via 0:HasComponent Reference in the MachineOperationMonitoringType. |
|
Server |
MachineTool Production PartsProducedInLifetime |
Instances of MachineToolType shall provide the component PartsProducedInLifetime. This is provided via 0:HasComponent Reference in the 2:OperationCounters in the MachineOperationMonitoringType. |
|
Server |
MachineTool Production Simple Parts Monitoring |
[DEPRECATED] Instances of MachineToolType shall provide the components PartsCompleted and PartsGood in each instance of the ProductionJobType. If individual Parts are modelled, this counter shall be identical to the number of PartType instances with PartQuality set to Good, CapabilityUnavailable or WillNotBeMeasured. |
|
Server |
MachineTool Monitoring MaintenanceMode |
Instances of MachineToolType shall provide the SubStateMachine Maintenance (MaintenanceModeStateMachineType) of the 3:MachineryOperationMode. |
|
Server |
MachineTool Components |
Supports the 3:MachineComponentsType for all machines managed by the Server, each one referencing the exposed components of the corresponding machine. Each instance of MachineToolType shall reference an instance of 3:MachineComponentsType or a subtype using the 0:DefaultInstanceBrowseName with a Reference of 0:HasAddIn or a subtype. |
|
Server |
MachineTool Production Machinery Job Management |
Supports the 6:JobManagementType for all machines managed by the Server. Each instance of MachineToolType shall reference an instance of 6:JobManagementType or a subtype using the 0:DefaultInstanceBrowseName with a Reference of 0:HasAddIn or a subtype. |
|
Server |
MachineTool FileSystem |
Supports the 0:FileSystem and 0:FileDirectoryType as well as 0:FileType and corresponding methods for at least one machine instance of the MachineToolType or subtypes managed by the Server. |
Table 121 lists all Profiles defined in this document and defines their URIs.
Table 121 – Profile URIs for Machine Tools
|
Profile |
URI |
|
MachineTool Basic Server Profile |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Basic |
|
MachineTool Basic Secure Server Profile |
http://opcfoundation.org/UA-Profile/MachineTool/Server/BasicSecure |
|
MachineTool Monitoring Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Monitoring |
|
MachineTool Tools Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Tools |
|
MachineTool Tool Life Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/ToolLife |
|
MachineTool Production Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Production |
|
MachineTool Production Plan Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/ProductionPlan |
|
MachineTool Errors and Alerts Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/ErrorsAndAlerts |
|
MachineTool Prognoses Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Prognoses |
|
MachineTool KPI Monitoring Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/KPIMonitoring |
|
MachineTool Components Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/Components |
|
MachineTool Job Management Server Facet |
http://opcfoundation.org/UA-Profile/MachineTool/Server/JobManagement |
The following sections specify the Facets and Profiles available for Servers that implement the Machine Tools companion specification. Each section defines and describes a Facet or Profile.
[Contains deprecated ConformanceUnits]
Table 122 defines a Profile that describes the minimum required content and address space functionality any MachineTool server shall at least provide. Concerning Stacklights and Channels, it is expected that a server models these elements if they are available on the machine tool.
Table 122 – MachineTool Basic Server Profile
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:Micro Embedded Device 2017 Server Profile |
M |
|
Base Information |
0:Base Info Custom Type System |
M |
|
Base Information |
0:Base Info Engineering Units |
M |
|
Base Information |
0:Base Info Placeholder Modelling Rules |
M |
|
Profile |
0:SecurityPolicy [B] – Basic256Sha256 |
M |
|
MachineTool |
MachineTool Monitor Items Min |
M |
|
MachineTool |
MachineTool Monitor Items |
O |
|
Profile |
3:Machinery Machine Identification Server Facet |
M |
|
MachineTool |
MachineTool MachineToolType Mandatory Nodes |
M |
|
Profile |
4:IA Stacklight Server Profile |
M |
|
MachineTool |
MachineTool Monitoring Basic - Stacklight |
M |
|
MachineTool |
MachineTool Monitoring Basic - PowerOnDuration |
O |
|
MachineTool |
MachineTool Monitoring Machinery PowerOnDuration |
O |
|
MachineTool |
MachineTool Monitoring Basic - Channels |
M |
|
MachineTool |
MachineTool Production Basic |
M |
|
Machinery |
3:Machinery Building Block Organization |
O |
[Contains deprecated ConformanceUnits]
Table 123 defines a Profile that adds security features for client authentication to the MachineTool Basic Server Profile.
Table 123 – MachineTool Basic Secure Server Profile
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
MachineTool Basic Server Profile |
M |
|
Profile |
0:SecurityPolicy [A] - Aes128-Sha256-RsaOaep |
M |
|
Profile |
0:User Token – X509 Certificate Server Facet |
M |
This Facet provides additional monitoring information.
Table 124 – MachineTool Monitoring Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
MachineTool |
MachineTool Identification SoftwareInfo |
M |
|
MachineTool |
MachineTool Identification Machinery additional |
M |
|
MachineTool |
MachineTool Monitoring WorkingUnit |
M |
This Facet contains the information about tools in the machine tool. If the list of tools is used dynamically, the ConformanceUnits MachineTool Event Propagation and MachineTool Event Tools shall be provided.
Table 125 – MachineTool Tools Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:Address Space Notifier Server Facet |
M |
|
MachineTool |
MachineTool Equipment ToolIdentification |
M |
|
MachineTool |
MachineTool Equipment Dynamic Tool List |
O |
|
MachineTool |
MachineTool Event Propagation |
O |
|
MachineTool |
MachineTool Event Tools |
O |
This Facet provides the tool life data for tools in the machine tool.
Table 126 – MachineTool Tool Life Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
MachineTool |
MachineTool Equipment ToolLife |
M |
[DEPRECATED in version 1.02]
This Facet contains enhanced information about the production on the machine tool compared to the MachineTool Basic Server Profile. It adds TransitionEvents for the state machine of each ProductionJobType node.
Table 127 – MachineTool Production Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:A & C Acknowledgeable Alarm Server Facet |
M |
|
Profile |
0:Address Space Notifier Server Facet |
M |
|
Profile |
0:State Machine Server Facet |
M |
|
MachineTool |
MachineTool Production Job |
M |
|
MachineTool |
MachineTool Production LastTransition |
M |
|
MachineTool |
MachineTool Production ProductionJobStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionProgramStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionPartStateMachineType |
M |
|
MachineTool |
MachineTool Production InterruptionConditionType |
O |
|
MachineTool |
MachineTool Event Propagation |
M |
|
MachineTool |
MachineTool Event Production |
M |
[DEPRECATED in version 1.02]
The Production Plan Server Facet uses the ProductionPlan as a dynamic list. Jobs can be added and deleted to mirror the job list on the machine tool more closely. The OPC UA server can show jobs scheduled for future production and jobs that are finished in this list along with one or multiple active jobs. The ProductionJobStateMachine enables OPC UA Clients to distinguish between these states.
Table 128 – MachineTool Production Plan Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:A & C Acknowledgeable Alarm Server Facet |
M |
|
Profile |
0:Address Space Notifier Server Facet |
M |
|
Profile |
0:State Machine Server Facet |
M |
|
MachineTool |
MachineTool Production LastTransition |
M |
|
MachineTool |
MachineTool Production ProductionJobStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionProgramStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionPartStateMachineType |
M |
|
MachineTool |
MachineTool Production InterruptionConditionType |
O |
|
MachineTool |
MachineTool Production Dynamic Job List |
M |
|
MachineTool |
MachineTool Event Propagation |
M |
|
MachineTool |
MachineTool Event Production |
M |
This Facet contains the ConformanceUnits concerning errors and alerts sent by the machine tool.
Table 129 – MachineTool Errors and Alerts Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:A & C Acknowledgeable Alarm Server Facet |
M |
|
MachineTool |
MachineTool Notification – Errors and Alerts |
M |
|
MachineTool |
MachineTool Event Propagation |
M |
|
MachineTool |
MachineTool Event Messages |
M |
This Facet provides prognoses for the machine tool.
Table 130 – MachineTool Prognoses Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:Address Space Notifier Server Facet |
M |
|
Profile |
0:Standard Event Subscription Server Facet |
M |
|
MachineTool |
MachineTool PrognosisType |
M |
|
MachineTool |
MachineTool Prognoses Dynamic List |
M |
|
MachineTool |
MachineTool Event Propagation |
M |
|
MachineTool |
MachineTool Event Prognoses |
M |
[Contains deprecated ConformanceUnits]
This Facet provides values to aid KPI calculation.
Table 131 – MachineTool KPI Monitoring Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
0:Address Space Notifier Server Facet |
M |
|
Profile |
0:State Machine Server Facet |
M |
|
Profile |
3:Machinery State Server Facet |
M |
|
Machinery |
3:Machinery Operation Mode |
M |
|
Profile |
MachineTool Errors and Alerts Server Facet |
M |
|
Profile |
MachineTool Monitoring Server Facet |
M |
|
MachineTool |
MachineTool Production LastTransition |
M |
|
MachineTool |
MachineTool Production ProductionJobStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionProgramStateMachineType |
M |
|
MachineTool |
MachineTool Production ProductionPartStateMachineType |
M |
|
MachineTool |
MachineTool Production InterruptionConditionType |
O |
|
MachineTool |
MachineTool Event Production |
M |
|
MachineTool |
MachineTool Production Job Available |
M |
|
MachineTool |
MachineTool Monitoring Obligation |
M |
|
MachineTool |
MachineTool Production PartsProducedInLifetime |
M |
|
MachineTool |
MachineTool Production Simple Parts Monitoring |
M |
This Facet contains the elements used to model machine tool components in the sense of elements of the 3:MachineComponentsType from OPC 40001-1.
Table 132 – MachineTool Components Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
MachineTools |
MachineTool Components |
M |
|
Profile |
3:Machinery Component Identification Server Facet |
M |
This Facet contains the elements used to model the job orders on a machine according to OPC 40001-3.
Table 133 – MachineTool Job Management Server Facet
|
Group |
ConformanceUnit / Profile Title |
M / O |
|
Profile |
6:Machinery Job Management Base Server Facet |
M |
|
MachineTools |
MachineTool Production Job Management |
M |
|
MachineTools |
MachineTool FileSystem |
O |