Search

198 result(s) for VariableTypes

• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  4.1 Overview
  AddressSpace concepts. Clause 6 defines details on the type model for ObjectTypes and VariableTypes . Standard ReferenceTypes , DataTypes and EventTypes are defined in Clauses 7 to 8.61 . The informative Annex
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  4.6.3 Subtyping
  type definitions. The subtyping rules are defined in Clause  6 . Subtyping of ObjectTypes and VariableTypes allows: Clients that only know the supertype to handle an instance of the subtype
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.6.2 Variable NodeClass
  used to represent values which may be simple or complex. Variables are defined by VariableTypes , as specified in 5.6.5 . Variables are always defined as Properties or DataVariables of other Nodes
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.6.4 DataVariable
  Object . However, complex DataVariables may expose other DataVariables , and ObjectTypes and complex VariableTypes may also contain DataVariables . Therefore each DataVariable shall be the TargetNode of at least one HasComponent Reference
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.6.5 VariableType NodeClass
  VariableType NodeClass VariableTypes are used to provide type definitions for Variables . VariableTypes are defined using the VariableType NodeClass , as specified in Table 14 . Table 14 - VariableType NodeClass Name Use Data ... ModellingRules defined in 6.4.4 . HasComponent 0..* HasComponent References are used for complex VariableTypes to identify their containing DataVariables . Complex VariableTypes can only be used for DataVariables . The referenced Nodes
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.8.1 DataType Model
  used to describe the structure of the Value Attribute of Variables and their VariableTypes . Therefore each Variable and VariableType is pointing with its DataType Attribute to a Node ... DataType NodeClass as shown in Figure 17 . Figure 17 - Variables, VariableTypes and their DataTypes In many cases, the NodeId of the DataType Node - the DataTypeId - will be well-known
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.8.2 Encoding Rules for different kinds of DataTypes
  have any encodings and cannot be exchanged on the wire. Variables and VariableTypes use abstract DataTypes to indicate that their Value may be any one of the subtypes
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.8.3 DataType NodeClass
  abstract or not. Abstract DataTypes can be used in the AddressSpace , i.e. Variables and VariableTypes can point with their DataType Attribute to an abstract DataType . However, concrete values can never
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  5.8.6.1 Overview
  SubtypeRestriction shall only be used on Variables used as instances, never on InstanceDeclarations or VariableTypes . For Method Arguments , it can be used in combination with the HasArgumentDescription
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.1 Overview
  Overview In the remainder of Clause 6 the type model of ObjectTypes and VariableTypes is defined regarding subtyping and instantiation
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.3.1 Overview
  remainder of 6.3 specify subtyping rules for single inheritance on ObjectTypes and VariableTypes
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.3.2 Attributes
  BrowseName and DisplayName values should be overridden. Special rules apply for some Attributes of VariableTypes as defined in 6.2.8 . Optional Attributes , not provided by the parent type, may be added
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.4.4.4.3 ExposesItsArray
  ExposesItsArray The ExposesItsArray ModellingRule exposes a special semantic on VariableTypes having a single- or multidimensional array as the data type. It indicates that each value of the array will also
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  6.5 Changing Type Definitions that are already used
  used There is no behaviour specified regarding subtypes and instances when changing ObjectTypes and VariableTypes . It is Server -dependent, if those changes are reflected on the subtypes and instances
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  7.7 HasComponent ReferenceType
  DataVariables , and Methods . This ReferenceType is also used to relate complex Variable s or VariableTypes with their DataVariables . Like all other ReferenceTypes , this ReferenceType does not specify anything about
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  7.15 GeneratesEvent
  this ReferenceType is to identify the types of Events instances of ObjectTypes or VariableTypes may generate and Methods may generate on each Method call. The SourceNode of References of this
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  A.3 ObjectTypes
  only having one value (e.g. a simple heat sensor) can also be modelled as VariableTypes . However, extensibility mechanisms should be considered (e.g. a complex heat sensor subtype could have several
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  A.4.1 General
  A.4.1 General VariableTypes are only used for DataVariables and should be used when there are several Variables having the same semantic (e.g. set point). It is not necessary to define
• OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model
  B.1 Background
  marked as <<TypeExtension>>. In addition, the domain model contains ObjectTypes , VariableTypes etc. represented as UML objects (see Figure B.1 ). The OPC Foundation specifies not only
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  5.4 VariableTypes
  VariableTypes For all VariableTypes specified in NamespaceIndex 0, the Attributes named in Table 6 shall be set as specified in Table 6 . Table 6 - Common VariableType Attributes Attributes Value Value
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  7.1 General
  extended with additional components this standard allows the extension of the standard VariableTypes defined in this document with additional components. This allows the expression of additional information in the type ... Variable anyway. However, it is not allowed to restrict the components of the standard VariableTypes defined in this International Standard. An example of extending VariableTypes would be putting the standard
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  7.2 BaseVariableType
  BaseVariableType The BaseVariableType is the abstract base type for all other VariableTypes . However, only the PropertyType and the BaseDataVariableType directly inherit from this type. There are no References specified
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  7.4 BaseDataVariableType
  having no more concrete type definition available. This VariableType is the base VariableType for VariableTypes of DataVariables , and all other VariableTypes of DataVariables shall either directly or indirectly inherit from
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  7.28 3DFrameType
  reflects the semantic of its DataType , defined in 12.30 . It refines the DataTypes and VariableTypes of the CartesianCoordinates and Orientation to the corresponding 3D types. The VariableType is formally defined
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  8.2.7 VariableTypes
  VariableTypes This standard Object is the browse entry point for VariableType Nodes . Figure 5 illustrates the structure beneath this Node . Only Organizes References are used to relate Objects and VariableTypes ... VariableTypes " standard Object . The " VariableTypes " Object shall not reference any other NodeClasses . Figure 5 - VariableTypes organization The intent of the " VariableTypes " Object is that
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  12.16 ModelChangeStructureDataType
  This verb may be used only for affected Nodes that are Variables or VariableTypes . It indicates that the DataType Attribute has changed. Reserved 5:7 Reserved for future use. Shall
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  A.1 Overview
  following subclauses describe the design decisions made while modelling the Server Object . General DataTypes , VariableTypes and ObjectTypes such as the EventTypes described in this standard are not taken into account
• OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings
  F.15 Example
  value in the document except for NodeIds that appear in Values of Variables or VariableTypes . <Aliases> <Alias Alias="HasComponent">i=47</Alias
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  1 Scope
  defines the information model associated with Data Access (DA). It particularly includes additional VariableTypes and complementary descriptions of the NodeClasses and Attributes needed for Data Access, additional Properties , and other
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  3.1.2 AnalogItem
  values provided by temperature sensors or pressure sensors. OPC UA defines specific VariableTypes to identify an AnalogItem . Properties describe the possible ranges of AnalogItems
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  3.1.3 DiscreteItem
  number of possible values (e.g., OPENING, OPEN, CLOSING, CLOSED) Note 1 to entry: Specific VariableTypes are used to identify DiscreteItems with two states or with multiple states. Properties specify
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  3.1.4 ArrayItem
  Note 1 to entry: Typical examples are the data provided by analyser devices. Specific VariableTypes are used to identify ArrayItem variants
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  5.1 General
  General The DataAccess model extends the variable model by defining VariableTypes . The DataItemType is the base type. ArrayItemType , Base AnalogType and DiscreteItemType are specializations. See Figure 2 . Each of these ... VariableTypes can be further extended to form domain or server specific DataItems . Figure 2 - DataItem VariableType hierarchy
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  5.3.2.1 General
  General The VariableTypes in subclauses 5.3.2.2 to 5.3.2.5 define the characteristics of AnalogItems . The types have identical semantics and Properties but with diverging ModellingRules for individual Properties . The Properties ... only described once - in 5.3.2.2 . The descriptions apply to the Properties for the other VariableTypes as well
• OPC-10000-8 – OPC Unified Architecture - Part 8: Data Access
  5.4 Address Space model
  this case the AnalogItemType ). Additional characteristics of DataItem s are defined using Properties . The VariableTypes in 5.2 specify which properties can exist. These Properties have been found to be useful
• OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions
  6.5 Conditions in a VariableType
  HasCondition in a VariableType is a special use case since Variables (and VariableTypes ) are not allowed to be the source of a HasComponent Reference to an Object. Figure 29 provides
• OPC-10000-10 – OPC Unified Architecture - Part 10: Programs
  5.2.7 FinalResultData
  FinalResultData The FinalResultData ObjectType specifies the VariableTypes that are preserved when the Program has completed its Function . The ObjectType includes a HasComponent for a VariableType of each Variable that comprises
• OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines
  4.1 General
  General This document describes the basic infrastructure to model state machines. It defines ObjectTypes , VariableTypes and ReferenceTypes and explains how they should be used. This document is an integral part
• OPC-10000-19 – OPC Unified Architecture - Part 19: Dictionary Reference
  4.1 General
  reference external dictionaries like IEC Common Data Dictionary or ECLASS. It defines ObjectTypes , VariableTypes and a ReferenceType and explains how they should be used. The ObjectTypes are used to represent
• OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering
  A.6 VariableType mapping
  VariableType mapping All the rules in A.5 for ObjectTypes also apply to VariableTypes with these notable differences: The base AML SUC for OPC UA VariableTypes is BaseVariableType ; VariableTypes have ... this is that the Value of an instance can be any valid DataType . Typically, VariableTypes that derive from BaseVariable type will alter the DataType of Value to be more restrictive
• OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering
  B.1.5 UA SystemUnitClass Library
  opcfoundation.org/UA/" defines the SystemUnitClasses that correspond to their equivalent OPC UA ObjectTypes and VariableTypes
• OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering
  C.1.4 DI SystemUnitClass Library
  opcfoundation.org/UA/DI/" defines the SystemUnitClasses that correspond to their equivalent OPC DI ObjectTypes and VariableTypes
• OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering
  D.1.3 OPC UA FX AttributeType Libraries
  define the SystemUnitClasses that correspond to their equivalent OPC UA FX ObjectTypes and VariableTypes
• OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering
  E.4 Safety SystemUnitClass Library
  /UA/Safety/" defines the SystemUnitClasses that correspond to their equivalent OPC UA Safety ObjectTypes and VariableTypes
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  3.3.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-10030 – OPC Unified Architecture - Common Object Model: ISA-95
  6.1 General
  obtain the value for the CDT DataType supplemental Properties . However, for some DataTypes or VariableTypes the supplemental Properties may have different values on instances than the default value. For example ... from the CDT DataType. Figure 16 - Basic data representation model Third parties may define VariableTypes that rely on CDT DataTypes to enhance data representation methodology. This approach will allow
• OPC-10030 – OPC Unified Architecture - Common Object Model: ISA-95
  6.3.1 General
  that is mapped to CC DataType may be defined in ObjectTypes or VariableTypes
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  6.1 General
  Model is a representation of the ISA-95 data model in OPC Methods , ObjectTypes , VariableTypes , DataTypes and ReferenceTypes . This model generates standard types. All ISA-95 types will be defined ... part of the name, this is to be able to differentiate them from any VariableTypes that will just end in Type. All enumerations will end in "Enum
• OPC-10100-1 – OPC UA for WoT Connectivity - Part 1: API Definition
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-10101 – OPC UA for WoT Binding
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30010 – OPC UA for AutoId Devices - AutoID: OPC UA for AutoId Devices
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30020 – MDIS OPC UA Companion Specification
  4.3.4.3 Companion Specifications
  companion specification for an industry specific vertical market describes an InformationModel by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market. Table 3 contains
• OPC-30020 – MDIS OPC UA Companion Specification
  10.5.2 Object Collection, Aggregation and Extension Definition
  minimise variability, when aggregating or extending objects only instances of the following VariableTypes and ObjectTypes shall be used: Standard MDIS Objects defined in section 6 . BaseDataVariableType DiscreteItemType (Variable) AnalogItemType (Variable
• OPC-30030 – OPC UA for BACnet - BACnet: OPC UA Information Model
  3.5.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. Table 6 - Common VariableType Attributes Attributes Value Value
• OPC-30030 – OPC UA for BACnet - BACnet: OPC UA Information Model
  5.2 Model Overview
  from which the OPC UA for BACnet information model ObjectTypes are derived and some VariableTypes used in the BACnet ObjectTypes . The left grey box in the second level shows
• OPC-30040 – OPC UA for AutomationML - Xxx: OPC UA Information Model for AutomationML
  3.3.4.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. Table 6 - Common VariableType Attributes Attributes Value Value
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  4.3.4.3 Companion Specifications
  specification for an industry specific vertical market describes an information model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market. Table 1 contains
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  6.1 General
  PackML information model is a representation of the PackML data model in OPC ObjectTypes , VariableTypes , DataTypes and ReferenceTypes . This model generates standard types. All PackML types will be defined ... part of the name, this is to be able to differentiate them from any VariableTypes that will just end in Type. All enumerations will end in "Enum
• OPC-30060 – OPC UA for Tobacco Machine Communication
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30060 – OPC UA for Tobacco Machine Communication
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  3.3.5.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. Table 7 - Common VariableType Attributes Attributes Value Value
• OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture
  5.2.1 POWERLINK Objects and their attributes
  Object Type The relevant object types of POWERLINK are VAR, ARRAY and RECORD. The VariableTypes PowerlinkArrayType , PowerlinkRecordType and PowerlinkVariableType are used to represent such objects from the POWERLINK Object Dictionary
• OPC-30140 – OPC UA for PROFINET
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30140 – OPC UA for PROFINET
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30141 – OPC UA for PROFIenergy
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 9 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30141 – OPC UA for PROFIenergy
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30142 – OPC UA for PROFINET Remote IO
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30142 – OPC UA for PROFINET Remote IO
  4.3.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30142 – OPC UA for PROFINET Remote IO
  6.2 OPC UA for RIO Channel Model
  Channel are provided with the "Config" Variable . There are individual configuration VariableTypes defined for each channel type, the type used for analog Input Channels according to RIOforPA ... RioPaAnalogInputConfigVariableType . Figure 9 shows all RIO Channel ObjectTypes , Process Value VariableTypes and configuration ObjectTypes which are defined in this specification to cover digital and analog Input and Output for RIOforPA
• OPC-30142 – OPC UA for PROFINET Remote IO
  9.2 Process Value VariableTypes
  Process Value VariableTypes Table 62 lists the Process Value VariableTypes and their DataTypes defined for RIOforPA and RIOforFA. There are different VariableTypes together with their DataTypes defined for each profile ... digital and analog Process Values . Table 62 - RIO Process Value VariableTypes and DataTypes Profile Digital Channel Types Process Value VariableType DataType RIOforPA RioPaDigitalProcessValueVariableType RioPaDigitalProcessValueDataType RIOforFA RioFaDigitalProcessValueVariableType RioFaDigitalProcessValueDataType Analog Channel Types
• OPC-30142 – OPC UA for PROFINET Remote IO
  9.4 Channel Configuration VariableTypes
  Channel Configuration VariableTypes The VariableTypes in this section aggregate RIO Channel Properties which do not change unless the configuration changes or some other condition arises which is not typical ... chapter 7.1.2 . This ObjectType contains all Variables defined by all RIO Channel configuration VariableTypes in this section
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  3.5.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  3.5.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  3.5.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  3.5.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30200 – OPC UA for Commercial Kitchen Equipment
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30200 – OPC UA for Commercial Kitchen Equipment
  4.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30250 – OPC Unified Architecture for DEXPI
  4.2.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the Table 6. The definitions for the Attributes
• OPC-30250 – OPC Unified Architecture for DEXPI
  5.2.3.3 Companion Specifications
  specification for an industry-specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  6.1 General
  Model is a representation of the OPEN-SCS data model in OPC Methods, ObjectTypes , VariableTypes , DataTypes and ReferenceTypes . This model generates standard types. All OPEN-SCS types will be defined ... part of the name, this is to be able to differentiate them from any VariableTypes that will just end in Type. All enumerations will end in "Enum
• OPC-30270 – OPC UA for Asset Administration Shell (AAS)
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this companion specification, the Attributes named in Table 6 shall be set as specified in the table. The definitions for the Attributes
• OPC-30270 – OPC UA for Asset Administration Shell (AAS)
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-30400-1 – OPC UA for Cloud Library - Part 1: Overall Architecture and Use Cases
  4.2.3.3 Companion specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market. The Cloud Library
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  4.2.3.3 Companion Specifications
  specification for an industry-specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, as well
• OPC-34100 – OPC UA for Energy Consumption Management
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-34100 – OPC UA for Energy Consumption Management
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-34100 – OPC UA for Energy Consumption Management
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  3.4.1.1 Node Definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 8 be set as specified in the table. The definitions for the Attributes can be found
• OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  3.2.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 8 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40200 – OPC UA for Weighing Technology
  4.2.3.3 Companion Specifications
  Specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40210 – OPC UA for Geometric Measurement Systems
  4.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40210 – OPC UA for Geometric Measurement Systems
  5.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  6.1 Modelling Concepts
  vacuum pumps into an OPC UA model by defining generic and specific ObjectTypes , VariableTypes and DataTypes . In general, submodels are modeled as subtypes of the 2:FunctionalGroupType
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40301 – OPC UA for Flat Glass Processing
  3.5.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40301 – OPC UA for Flat Glass Processing
  3.5.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40301 – OPC UA for Flat Glass Processing
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 11 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40444 – OPC UA for Textile Testing Devices
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40444 – OPC UA for Textile Testing Devices
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40444 – OPC UA for Textile Testing Devices
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  4.3.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this document, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40502 – OPC UA for Computerized Numerical Control (CNC) Systems - for CNC Systems: OPC UA Information Model
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. Table 6 - Common VariableType Attributes Attributes Value Value
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  6 Wireless Machine Tool Peripheral Information Model overview
  wireless machine tool peripherals (WMTP). The information model for WMTP provides the ObjectTypes , VariableTypes and Methods required to map the Industrial Measurement Devices standard for WMTP. When using this
• OPC-40530 – OPC UA for Laser Systems
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40530 – OPC UA for Laser Systems
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40530 – OPC UA for Laser Systems
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40540 – OPC UA for Additive Manufacturing
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40540 – OPC UA for Additive Manufacturing
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40560 – OPC UA for Mining - General
  3.2.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40560 – OPC UA for Mining - General
  3.2.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40560 – OPC UA for Mining - General
  4.3.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40570 – OPC UA for Wire Harness Manufacturing
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40570 – OPC UA for Wire Harness Manufacturing
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40570 – OPC UA for Wire Harness Manufacturing
  4.2.3.3 Companion Specifications
  Specification for an industry-specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market. It may also
• OPC-40600 – OPC UA for Weihenstephan Standards
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40600 – OPC UA for Weihenstephan Standards
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40700 – OPC UA for Surface Technology - General Types
  3.3.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40700 – OPC UA for Surface Technology - General Types
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40700 – OPC UA for Surface Technology - General Types
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40700 – OPC UA for Surface Technology - General Types
  7.1 STSysType ObjectType Definition
  components of the Surface Technology System. Monitoring is representing a collection of ObjectTypes and VariableTypes , representing the current state of the process, that are not assigned to a component ... implemented as an add-in. Description is representing a collection of ObjectTypes and VariableTypes that describe the overall system. This may be information that is not an identifier
• OPC-40700 – OPC UA for Surface Technology - General Types
  7.2 STCompType ObjectType Definition
  numerous identification features of the component. Monitoring is representing a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. MachineryBuildingBlocks ... implemented as an add-in. Description is representing a collection of ObjectTypes and VariableTypes that describe the component. This may be information that is not an identifier for the component
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  3.3.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  3.3.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.1 STSysMaterialTransportLineType ObjectType Definition
  STSysMaterialTransportLineType ObjectType Definition The STSysMaterialTransportLineType provides relevant ObjectTypes and VariableTypes for controlling and monitoring a material transport line of a material supply system and is formally defined in Table ... Basic MSS STSysMaterialTransportLineType Monitoring MSS STSysMaterialTransportLineType Description Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. MachineryBuildingBlocks represents
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.2 STSysRamType ObjectType Definition
  STSysRamType ObjectType Definition The STSysRamType provides relevant ObjectTypes and VariableTypes for controlling and monitoring an overall ram system. It can contain several components as rams or vessels. The STSysRamType
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.3 STCompRamType ObjectType Definition
  STCompRamType ObjectType Definition The STCompRamType provides relevant ObjectTypes and VariableTypes for controlling and monitoring a ram unit. It is formally defined in Table 21 . Table 21 - STCompRamType Definition Attribute Value ... Basic MSS STCompRamType Monitoring MSS STCompRamType Description Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. MachineryBuildingBlocks represents
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.4 STCompPowderVibrationType ObjectType Definition
  STCompPowderVibrationType ObjectType Definition The STCompPowderVibrationType provides relevant ObjectTypes and VariableTypes for controlling and monitoring a powder vibration unit of a material supply system and is formally defined in Table ... Units MSS STCompPowderVibrationType Basic MSS STCompPowderVibrationType Monitoring Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. The components
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.5 STCompPowderSieveType ObjectType Definition
  STCompPowderSieveType ObjectType Definition The STCompPowderSieveType provides relevant ObjectTypes and VariableTypes for controlling and monitoring a powder sieve of a material supply system and is formally defined in Table 27 . Table ... Units MSS STCompPowderSieveType Basic MSS STCompPowderSieveType Description Description represents a collection of ObjectTypes and VariableTypes that describe the powder sieve. This may be information that is not an identifier
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.6 STCompProcessValveType ObjectType Definition
  Basic MSS STCompProcessValveType Monitoring MSS STCompProcessValveType Description Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. MachineryBuildingBlocks represents ... which are implemented as an add-in. Description represents a collection of ObjectTypes and VariableTypes that describe the valve. This may be information that is not an identifier
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.7 STSysVesselType ObjectType Definition
  Monitoring MSS STSysVesselType Components MSS STSysVesselType Description Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. Components represents ... that are representing components of the vessel. Description represents a collection of ObjectTypes and VariableTypes that describe the vessel. This may be information that is not an identifier
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.8 STCompStirrerType ObjectType Definition
  Units MSS STCompStirrerType Basic MSS STCompStirrerType Monitoring Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. The components
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  7.9 STCompHeaterType ObjectType Definition
  Basic MSS STCompHeaterType Monitoring MSS STCompHeaterType Description Monitoring represents a collection of ObjectTypes and VariableTypes , representing the current state of the process that are assigned to the component. Description represents ... collection of ObjectTypes and VariableTypes that describe the heater. This may be information that is not an identifier for the system and that is static in character but must
• OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40719 – OPC UA for Plasma Surface Technology
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40719 – OPC UA for Plasma Surface Technology
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40719 – OPC UA for Plasma Surface Technology
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also
• OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)
  3.4.1.1 Node definitions
  exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes , any DataTypes referenced
• OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)
  3.4.3.4 VariableTypes
  VariableTypes For all VariableTypes specified in this specification, the Attributes named in Table 10 shall be set as specified in the table. The definitions for the Attributes can be found
• OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)
  4.2.3.3 Companion Specifications
  specification for an industry specific vertical market describes an Information Model by defining ObjectTypes , VariableTypes , DataTypes and ReferenceTypes that represent the concepts used in the vertical market, and potentially also