It is assumed that basic concepts of OPC UA information modelling and IO-Link are understood in this specification. This specification will use these concepts to describe the OPC UA for IO-Link Information Model. For the purposes of this document, the terms and definitions given in OPC 10000-1, OPC 10000-3, OPC 10000-4, OPC 10000-5, OPC 10000-7, OPC 10000-100, IO-Link Specification, and IODD Specification as well as the following apply.

Device as defined in IO-Link Specification

Master as defined in IO-Link Specification

ERPEnterprise Resource Planning

HMI Human-Machine Interface

HTTPHypertext Transfer Protocol

IODDIO-Link Device Description

IPInternet Protocol

ISDUIndexed Service Data Unit

MESManufacturing Execution System

PMSProduction Management System

SCADASupervisory Control And Data Acquisition

TCPTransmission Control Protocol

UA Unified Architecture

XMLExtensible Markup Language

Terms in this document are written in CamelCase. Only the first occurrence of a term is written in italic.

Node definitions are specified using tables (see Table 2).

Attributes are defined by providing the Attribute name and a value, or a description of the value.

References are defined by providing the ReferenceType name, the BrowseName of the TargetNode and its NodeClass.

• If the TargetNode is a component of the Node being defined in the table the Attributes of the composed Node are defined in the same row of the table.
• The DataType is only specified for Variables; “[<number>]” indicates a single-dimensional array, for multi-dimensional arrays the expression is repeated for each dimension (e.g. [2][3] for a two-dimensional array). For all arrays the ArrayDimensions is set as identified by <number> values. If no <number> is set, the corresponding dimension is set to 0, indicating an unknown size. If no number is provided at all the ArrayDimensions can be omitted. If no brackets are provided, it identifies a scalar DataType and the ValueRank is set to the corresponding value (see OPC 10000-3). In addition, ArrayDimensions is set to null or is omitted. If it can be Any or ScalarOrOneDimension, the value is put into “{<value>}”, so either “{Any}” or “{ScalarOrOneDimension}” and the ValueRank is set to the corresponding value (see OPC 10000-3) and the ArrayDimensions is set to null or is omitted. Examples are given in Table 1.

Table 1 – Examples of DataTypes

Notation	DataType	ValueRank	ArrayDimensions	Description
Int32	Int32	-1	omitted or null	A scalar Int32.
Int32[]	Int32	1	omitted or {0}	Single-dimensional array of Int32 with an unknown size.
Int32[][]	Int32	2	omitted or {0,0}	Two-dimensional array of Int32 with unknown sizes for both dimensions.
Int32[3][]	Int32	2	{3,0}	Two-dimensional array of Int32 with a size of 3 for the first dimension and an unknown size for the second dimension.
Int32[5][3]	Int32	2	{5,3}	Two-dimensional array of Int32 with a size of 5 for the first dimension and a size of 3 for the second dimension.
Int32{Any}	Int32	-2	omitted or null	An Int32 where it is unknown if it is scalar or array with any number of dimensions.
Int32{ScalarOrOneDimension}	Int32	-3	omitted or null	An Int32 where it is either a single-dimensional array or a scalar.

• The TypeDefinition is specified for Objects and Variables.
• The TypeDefinition column specifies a symbolic name for a NodeId, i.e. the specified Node points with a HasTypeDefinition Reference to the corresponding Node.
• The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule column. In the AddressSpace, the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object.

If the NodeId of a DataType is provided, the symbolic name of the Node representing the DataType shall be used.

Nodes of all other NodeClasses cannot be defined in the same table; therefore only the used ReferenceType, their NodeClass and their BrowseName are specified. A reference to another part of this document points to their definition.

Table 2 illustrates the table. If no components are provided, the DataType, TypeDefinition and ModellingRule columns may be omitted and only a Comment column is introduced to point to the Node definition.

Table 2 – Type Definition Table

Attribute	Value
Attribute name	Attribute value. If it is an optional Attribute that is not set “--“ will be used.
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule
ReferenceType name	NodeClass of the TargetNode.	BrowseName of the target Node. If the Reference is to be instantiated by the server, then the value of the target Node’s BrowseName is “--“.	DataType of the referenced Node, only applicable for Variables.	TypeDefinition of the referenced Node, only applicable for Variables and Objects.	Referenced ModellingRule of the referenced Object.
NOTE Notes referencing footnotes of the table content.

Components of Nodes can be complex that is containing components by themselves. The TypeDefinition, NodeClass, DataType and ModellingRule can be derived from the type definitions, and the symbolic name can be created as defined in Annex A. Therefore, those containing components are not explicitly specified; they are implicitly specified by the type definitions.

The NodeIds of all Nodes described in this standard are only symbolic names. Annex A defines the actual NodeIds.

The symbolic name of each Node defined in this specification is its BrowseName, or, when it is part of another Node, the BrowseName of the other Node, a “.”, and the BrowseName of itself. In this case “part of” means that the whole has a HasProperty or HasComponent Reference to its part. Since all Nodes not being part of another Node have a unique name in this specification, the symbolic name is unique.

The NamespaceUri for all NodeIds defined in this specification is defined in Annex A. The NamespaceIndex for this NamespaceUri is vendor-specific and depends on the position of the NamespaceUri in the server namespace table.

Note that this specification not only defines concrete Nodes, but also requires that some Nodes shall be generated, for example one for each Session running on the Server. The NodeIds of those Nodes are vendor-specific, including the NamespaceUri. But the NamespaceUri of those Nodes cannot be the NamespaceUri used for the Nodes defined in this specification, because they are not defined by this specification but generated by the Server.

The text part of the BrowseNames for all Nodes defined in this specification is specified in the tables defining the Nodes. The NamespaceUri for all BrowseNames defined in this specification is defined in Annex A.

If the BrowseName is not defined by this specification, a namespace index prefix like ‘0:EngineeringUnits’ is added to the BrowseName. This is typically necessary if a Property of another specification is overwritten or used in the OPC UA types defined in this specification. Table 83 provides a list of namespaces used in this specification.

The Attributes of Nodes, their DataTypes and descriptions are defined in OPC 10000-3. Attributes not marked as optional are mandatory and shall be provided by a Server. The following tables define if the Attribute value is defined by this specification or if it is vendor-specific.

For all Nodes specified in this specification, the Attributes named in Table 3 shall be set as specified in the table.

Table 3 – Common Node Attributes

Attribute	Value
DisplayName	The DisplayName is a LocalizedText. Each server shall provide the DisplayName identical to the BrowseName of the Node for the LocaleId “en”. Whether the server provides translated names for other LocaleIds is vendor-specific.
Description	Optionally a vendor-specific description is provided.
NodeClass	Shall reflect the NodeClass of the Node.
NodeId	The NodeId is described by BrowseNames as defined in 3.4.3.1
WriteMask	Optionally the WriteMask Attribute can be provided. If the WriteMask Attribute is provided, it shall set all non-vendor-specific Attributes to not writable. For example, the Description Attribute may be set to writable since a Server may provide a vendor-specific description for the Node. The NodeId shall not be writable, because it is defined for each Node in this specification.
UserWriteMask	Optionally the UserWriteMask Attribute can be provided. The same rules as for the WriteMask Attribute apply.
RolePermissions	Optionally vendor-specific role permissions can be provided.
UserRolePermissions	Optionally the role permissions of the current Session can be provided. The value is vendor-specific and depend on the RolePermissions Attribute (if provided) and the current Session.
AccessRestrictions	Optionally vendor-specific access restrictions can be provided.

For all Objects specified in this specification, the Attributes named in Table 4 shall be set as specified in the table. The definitions for the Attributes can be found in OPC 10000-3.

Table 4 – Common Object Attributes

Attribute	Value
EventNotifier	Whether the Node can be used to subscribe to Events or not is vendor-specific.

For all Variables specified in this specification, the Attributes named in Table 5 shall be set as specified in the table. The definitions for the Attributes can be found in OPC 10000-3.

Table 5 – Common Variable Attributes

Attribute	Value
MinimumSamplingInterval	Optionally, a vendor-specific minimum sampling interval is provided.
AccessLevel	The access level for Variables used for type definitions is vendor-specific, for all other Variables defined in this specification, the access level shall allow reading; other settings are vendor-specific.
UserAccessLevel	The value for the UserAccessLevel Attribute is vendor-specific. It is assumed that all Variables can be accessed by at least one user.
Value	For Variables used as InstanceDeclarations, the value is vendor-specific; otherwise it shall represent the value described in the text.
ArrayDimensions	If the ValueRank does not identify an array of a specific dimension (i.e. ValueRank <= 0) the ArrayDimensions can either be set to null or the Attribute is missing. This behaviour is vendor-specific. If the ValueRank specifies an array of a specific dimension (i.e. ValueRank > 0) then the ArrayDimensions Attribute shall be specified in the table defining the Variable.
Historizing	The value for the Historizing Attribute is vendor-specific.
AccessLevelEx	If the AccessLevelEx Attribute is provided, it shall have the bits 8, 9, and 10 set to 0, meaning that read and write operations on an individual Variable are atomic, and arrays can be partly written.

For all VariableTypes specified in this specification, the Attributes named in Table 6 shall be set as specified in the table. The definitions for the Attributes can be found in OPC 10000-3.

Table 6 – Common VariableType Attributes

Attributes	Value
Value	Optionally a vendor-specific default value can be provided.
ArrayDimensions	If the ValueRank does not identify an array of a specific dimension (i.e. ValueRank <= 0) the ArrayDimensions can either be set to null or the Attribute is missing. This behaviour is vendor-specific. If the ValueRank specifies an array of a specific dimension (i.e. ValueRank > 0) then the ArrayDimensions Attribute shall be specified in the table defining the VariableType.

For all Methods specified in this specification, the Attributes named in Table 7 shall be set as specified in the table. The definitions for the Attributes can be found in OPC 10000-3.

Table 7 – Common Method Attributes

Attributes	Value
Executable	All Methods defined in this specification shall be executable (Executable Attribute set to “True”), unless it is defined differently in the Method definition.
UserExecutable	The value of the UserExecutable Attribute is vendor-specific. It is assumed that all Methods can be executed by at least one user.