Search

181 result(s) for ConformanceUnits

• OPC-10000-2 – OPC Unified Architecture - Part 2: Security Model
  Annex A Mapping to ISA/IEC 62443-4-2 (informative)
  that does apply the table lists the relevant OPC UA Parts and the Profiles / ConformanceUnits that covers the listed functionality. For each OPC UA Part that is listed (other than ... will describe the OPC UA related functionality. For the row labelled OPC 10000-7 - ConformanceUnits, the keyword column contains the actual ConformanceUnits that apply. For the row labelled
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  3.3 Conventions for Node descriptions
  introduced to point to the Node definition. Each Node defined in this specification has ConformanceUnits defined in OPC 10000-7 that require the Node to be in the AddressSpace ... defined in this specification shall be exposed as well. The relations between Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  6.3.2 ServerCapabilitiesType
  MaxMonitoredItemsQueueSize UInt32 PropertyType Optional HasComponent Variable <VendorCapability> BaseDataType ServerVendorCapabilityType OptionalPlaceholder HasProperty Variable ConformanceUnits QualifiedName[] PropertyType Optional Conformance Units Base Info ServerType ServerProfileArray lists the Profiles that the Server ... VendorCapability> Variable is used to provide information about the server-specific capabilities. ConformanceUnits is a QualifiedName array specifying the set of conformance units the Server supports. This list should
• OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model
  6.3.5 SessionDiagnosticsObjectType
  have the SecurityAdmin role, defined in OPC 10000-18 . The additional definition for the ConformanceUnits of AuditActivateSessionEventType are defined in Table 15 . Table 14 - SessionDiagnosticsObjectType Additional Conformance Units BrowsePath Conformance
• OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings
  F.3 UANode
  locales. There shall be only one entry per locale. Category String [] A list of ConformanceUnits associated with the Node . The ConformanceUnits are specified by the authors of the UANodeSet ... allow users of the UANodeSet to exclude Nodes based on a selection of ConformanceUnits . When an UAInstance has the ParentNodeId specified, the UAInstance inherits the ConformanceUnits from its parent
• OPC-10000-7 – OPC Unified Architecture - Part 7: Profiles
  4.1 General
  This document provides a grouping of these features. The individual features are grouped into ConformanceUnits which are further grouped into Profiles . Figure 1 provides an overview of the interactions between ... Profiles , ConformanceUnits and TestCases . The large arrows indicate the components that are used to construct the parent. For example a Profile is constructed from Profiles and ConformanceUnits . The figure also
• OPC-10000-7 – OPC Unified Architecture - Part 7: Profiles
  4.2 Conformance Units and Conformance Groups
  portions of services or information models) that can be tested as a single entity. ConformanceUnits are the building blocks of a Profile . Each ConformanceUnit can also be used ... appear in more than one ConformanceUnit . For improved clarity, the large list of ConformanceUnits is arranged into named ConformanceGroups . These groups reflect different OPC UA aspects like the Service Sets
• OPC-10000-7 – OPC Unified Architecture - Part 7: Profiles
  4.3 Profiles
  Profiles A Profile is a named aggregation of ConformanceUnits and other Profiles . To support a Profile , an application has to support the ConformanceUnits and all aggregated Profiles . The definition ... include the same ConformanceUnit . Testing of a Profile consists of testing the individual ConformanceUnits that comprise the Profile . Profiles are named based on naming conventions (see 4.5 for details
• OPC-10000-7 – OPC Unified Architecture - Part 7: Profiles
  4.5 Profile conformance
  Profile conformance An OPC UA application shall implement all mandatory ConformanceUnits in a Profile in order to be compliant with the Profile . Some Profiles contain optional ConformanceUnits . Optional means that ... testing. The test result that is generated by the certification testing lists all optional ConformanceUnits and whether they are supported or not by the tested OPC UA application. Profiles
• OPC-10000-11 – OPC Unified Architecture - Part 11: Historical Access
  6.4 Arrays, index ranges and substrings
  ranges and substrings Historians are not required to be able to store arrays. Optional ConformanceUnits exist to indicate if they support storage of arrays. If a Historian does store arrays ... returning an index range in an array, it may only provide the entire array. ConformanceUnits are provided to indicate if a Historian supports index ranges. For ReadProcessedDetails, some Aggregates
• OPC-10000-15 – OPC Unified Architecture - Part 15: Safety
  11 Profiles and Conformance Units
  Profiles and Conformance Units Figure 28 shows an informative overview of the Facets and ConformanceUnits pertaining to this document. For normative reference consult the Profile Reporting at https://profiles.opcfoundation.org/ . Figure ... informative) - Facets and ConformanceUnits
• OPC-10000-24 – OPC Unified Architecture - Part 24: Scheduler
  9.1 Conformance Units
  Conformance Units Table 44 defines the corresponding ConformanceUnits for the OPC UA Information Model for Scheduler. Table 44 - Conformance Units for Scheduler Category Title Description Server Scheduler Scheduling Base Exposes
• OPC-10000-26 – Part 26: LogObject - Part 26: LogObject Model
  4.1 Overview
  illustrated types/instances are required for an implementation and are covered by separate ConformanceUnits and Facets . Figure 2 - Overview of LogObject Information Model
• OPC-10000-80 – OPC Unified Architecture - Part 80: UAFX Overview and Concepts
  6.5 Profiles
  Profiles A Profile is a named aggregation of ConformanceUnits and other Profiles ( OPC 10000-7 ). UAFX Profiles are defined in OPC 10000-84 . All OPC UA AutomationComponents will support
• OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model
  3.3.4 ConformanceUnits and Node definitions
  ConformanceUnits and Node definitions Each Node defined in this document references at least one ConformanceUnit. (defined in OPC 10000-84 ). If a Server supports the ConformanceUnit , it shall expose ... defined in this document shall be exposed as well. The relations between Nodes and ConformanceUnits are defined at the end of the tables that define Nodes , with
• OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model
  D.4.1 Raspberry Pi example
  certified application, the URL would provide the details related to the Profile/Facets and optional ConformanceUnits related to this product's certification. Figure D.36 - AutomationComponent expand example
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  4.1 General
  General This document adds ConformanceUnits , ConformanceGroups , Profiles , and Facets grouping OPC UA FX features to the Profile Model defined
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.1 Overview
  represents an individually testable entity. For improved clarity, the list of ConformanceUnits is arranged into named ConformanceGroups . Table 2 lists the ConformanceGroups that reflect the UAFX Information Models and features ... These ConformanceGroups and the ConformanceUnits are detailed in the following subclauses. Table 2 - ConformanceGroups Group Description UAFX Base Defines ConformanceUnits for all UAFX Controllers and devices . UAFX AutomationComponent Defines ConformanceUnits
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.2.5 UAFX FunctionalEntity
  UAFX FunctionalEntity Table 6 describes FunctionalEntity related UAFX Information Model ConformanceUnits. For additional information about these items, please refer to OPC 10000‑81 . Table 6 - UAFX FunctionalEntity Category Title Description ... FunctionalEntity ), supports at least one of the UAFX IFunctionalEntity InputData or UAFX IFunctionalEntity OutputData ConformanceUnits . Server UAFX IFunctionalEntity InputData Supports InputData of the IFunctionalEntity Interface . This includes a Reference
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.3.2 UAFX Ethernet networking features
  UAFX Ethernet networking features Table 8 describes UAFX Ethernet Networking Features ConformanceUnits which describe IEEE 802 features of End Station Components , Bridge Components , IA-stations , and UAFX Stations. For additional
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.3.3 UAFX Ethernet Networking Quantities
  UAFX Ethernet Networking Quantities Table 9 describes UAFX Ethernet Networking Quantities ConformanceUnits which define concrete values or value ranges for UAFX Ethernet Networking Features ConformanceUnits listed in Table 8 . Table
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.4.3 UAFX OfflineEngineering Descriptor Security
  UAFX OfflineEngineering Descriptor Security Table 11 describes UAFX OfflineEngineering Security ConformanceUnits which describe the security policies for signing Descriptors. For additional information about these items, please refer
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  5.4.4.1 Overview
  Overview This subclause describes UAFX Descriptor contents ConformanceUnits . The ConformanceGroups included are UAFX Descriptor Contents - UAFX Information Model, UAFX Descriptor Contents - Networking Information Model, UAFX Descriptor Contents - Core UA Information
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  6.1 Overview
  list of named Profiles, and the detailed listing of each Profile, including directly defined ConformanceUnits and any sub- Profiles included in the Profile . Subclauses in 6.6 describe Profiles
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  6.2 Profile list
  subclause of 6.6 . Each table may contain references to additional Profiles and/or ConformanceUnits . If a Profile is referenced, it means that it is completely included. The ConformanceUnits are referenced using
• OPC-10000-84 – OPC Unified Architecture - Part 84: UAFX Profiles
  Agreement of Use
  Profile. 10807 Errata Missing Conformance Units that require Descriptor to contain preconfigured DataSets Added ConformanceUnits UAFX Descriptor preconfigured PublishedDataSet and UAFX Descriptor preconfigured SubscribedDataSet, and made them mandatory ... both." 10837 Clarification CUs with Connection Endpoint Descriptor content - Required Changes Reworded ConformanceUnits UAFX Descriptor ConnectionEndpoint Base, UAFX Descriptor ConnectionEndpoint PubSub, and UAFX Descriptor IFunctionalEntity ConnectionEndpoints 10838 Clarification
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  3.3.1.1 Node definitions
  short name can be used. Each Node defined in this specification has ConformanceUnits defined in 11 that require the Node to be in the AddressSpace . If a Server supports ... defined in this specification shall be exposed as well. The relations between Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit
• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  11 Profiles and ConformanceUnits
  Profiles and ConformanceUnits Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7 . The Profiles and ConformanceUnits for this specification are maintained in the online database
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  6.1 General
  different use cases, that can be used independent of each other. The ConformanceUnits defined in section 15.1 reflect those individual functionalities. As not all concepts are independent of each other ... asset is needed in most cases, the Profiles defined in section 15.2 combine the ConformanceUnits to functionality that is required to be provided together
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  7 Identification of Asset
  this specification does not define or require a specific ObjectType or Interface , but ConformanceUnits and Profiles referencing mandatory and optional Properties as defined in OPC 10000-100 . The Properties defined
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  8.1 Overview
  Note that a Server might not provide both entry points, depending on the supported ConformanceUnits . Note that an AliasName could point to several Nodes representing the same asset (not shown
• OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics
  15.1 Conformance Units
  Conformance Units Table 54 defines the corresponding ConformanceUnits for the OPC UA Information Model for Asset Management Basics. Table 54 - Conformance Units for Asset Management Basics Category Title Description Server
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  3.3.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 7.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping
  7.1 Conformance Units
  Conformance Units Table 38 defines the corresponding ConformanceUnits for the OPC UA Information Model representing specific OPC UA DataTypes for built-in XML data types. Table 38 - Conformance Units
• OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Industrial Automation (see Table 60 ). Table 60 - Conformance Units for Industrial Automation Category Title
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  5.3 Overview of subtypes of BaseDataVariableType
  Annex E describes how other subtypes of SpatialLocationType can be created and used with ConformanceUnits of the RSL concept. Figure 3 shows an overview of Relative Spatial Location AddIns ... using the CartesianFrameAngleOrientationType as a subtype of the SpatialLocationType and which ConformanceUnits are defined to describe implemented instances. Figure 3 - Relative Spatial Location Information Model overview The folder RelativeSpatialLocations, described
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  9.1 Conformance Units
  Conformance Units Table 23 defines the corresponding ConformanceUnits for the OPC UA Information Model for RSL. Table 23 - Conformance Units for Relative Spatial Location Category Title Description Server RSL Base
• OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location
  E.1 Example of subtyping SpatialLocationType using the RSL concept
  CartesianFrameAngleOrientationType ConformanceUnit ) for a created subtype of SpatialLocationType and combining this with ConformanceUnits of the RSL concept, as defined in the RSL CartesianFrameAngleOrientation Profile ( 9.2.2.2 ), new Profiles can be created
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 0 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning
  11 Profiles and Conformance Units
  Profiles and Conformance Units Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7 . The Profiles and ConformanceUnits for this specification are maintained in an online database
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  7 Profiles and Conformance Units
  Profiles and Conformance Units Profiles and ConformanceUnits break functionality into testable groups. A ConformanceUnit describes a testable unit. A single ConformanceUnit is tested as a unit so all items covered ... must be supported or the ConformanceUnit will fail. ConformanceUnits can be included in multiple Profiles, so they are declared in their own table
• OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control
  7.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for this document. Table 80 defines the Server and Client ConformanceUnits . Table 80 - Conformance Units for ISA-95 Job Control Category ... Server ISA-95 Job Control Starting Server supports at least one of the following conformance units: ISA-95 Job Control StoreAndStart or ISA-95 Job Control Store and Start
• OPC-10100-1 – OPC UA for WoT Connectivity - Part 1: API Definition
  7 Profiles and Conformance Units
  Profiles and Conformance Units Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7 . The Profiles and ConformanceUnits for this specification are maintained in the online database
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  12.2 Conformance Units and Profiles
  Conformance Units and Profiles This chapter defines the corresponding Profiles and Conformance Units for the OPC UA Information Model for IEC61131-3. Profiles are named groupings of Conformance Units . Facets
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  12.3 Server Facets
  Servers that implement the IEC 61131-3 Information Model companion specification. Table 38 defines Conformance Units included in the minimum needed facet. It requires the support for profile BaseDevice Server ... Server Facet defined in OPC 10000-7 . Table 38 - Controller Operation Server Facet Definition Conformance Unit Description Optional/ Mandatory Ctrl DeviceSet Support the full component hirarchy with Ctrl Configuration , Ctrl
• OPC-30020 – MDIS OPC UA Companion Specification
  1 Scope
  shared between the systems, Methods used in the flow of information, Profile & ConformanceUnits describing the grouping of functionality, Recommended Practices for the use of MDIS. MDIS was created
• OPC-30020 – MDIS OPC UA Companion Specification
  4.1 MDIS definitions
  Server or Client may claim conformance. The capabilities are defined by a set of ConformanceUnits . Each Server or Client may claim conformance to more than one Profile . The OPC Foundation
• OPC-30020 – MDIS OPC UA Companion Specification
  14.2.1 Overview
  Overview This section defines ConformanceUnits that are specific to the MDIS information model. These ConformanceUnits are separated into ConformanceUnits that are Server specific and those that are Client specific
• OPC-30020 – MDIS OPC UA Companion Specification
  14.2.2 Server
  Server Table 125 defines the Server based ConformanceUnits . These units are related to MDIS information models. Table 126 describes general functionality based ConformanceUnits . Table 125 - MDIS Server Information Model ConformanceUnits ... that describes performance and the datasheet has been verified Table 126 - MDIS Server Behaviour ConformanceUnits Category Title Description Server MDIS Redundancy Base Supports one of the optional redundancy behaviours Server
• OPC-30020 – MDIS OPC UA Companion Specification
  14.2.3 Client
  Client Table 128 defines the Client based ConformanceUnits . These units are related to MDIS InformationModels . Table 129 describes general functionality based ConformanceUnits Table 128 - MDIS Client Information Model ConformanceUnits Category ... that describes performance and the datasheet has been verified Table 129 - MDIS Client Behaviour ConformanceUnits Category Title Description Client MDIS Client Redundancy Can communicate with a MDIS Server that transmits
• OPC-30020 – MDIS OPC UA Companion Specification
  14.3.1 Profile list
  provided as part of the MDIS OPC UA InformationModel . These Facets include MDIS InformationModel ConformanceUnits , but they also include ConformanceUnits or Facets from the OPC 10000-7 specification. They
• OPC-30020 – MDIS OPC UA Companion Specification
  14.3.2.1 MDIS Base Functionality Server Facet
  MDIS Base MDIS Information Version True This Profile includes a number of Profiles and ConformanceUnits
• OPC-30020 – MDIS OPC UA Companion Specification
  14.4.1 Overview
  Client should include. These are complete Profiles that include all required Profiles and ConformanceUnits to implement a Server or a Client
• OPC-30020 – MDIS OPC UA Companion Specification
  14.5 Equipment Certification
  MDIS. The certification documentation shall include a list of valid MDIS Profiles and optional ConformanceUnits for which the vendor equipment is certified, vendor equipment information used for testing, equipment architecture
• OPC-30030 – OPC UA for BACnet - BACnet: OPC UA Information Model
  13.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for BACnet. Table 255 - BACnet Conformance Units Definition Category Title Description Server BACnet Information Model
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  7.1.1 Overview
  Overview This section defines ConformanceUnits that are specific to the OPC UA PackML Information model. These ConformanceUnits are separated into ConformanceUnits that are Server specific and those that are Client
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  7.1.2 Server
  Server Table 63 defines the Server based ConformanceUnits . Table 63 - PackML Server Information Model Category Title Description Server PackML Base Functionality The server supports the BaseObjectModel . This includes exposing
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  7.1.3 Client
  Client Table 64 defines the Client based ConformanceUnits . Table 64 - PackML Client Information Model Category Title Description Derived Client PackML Base Functionality Client The Client makes use of the BaseObjectModel
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  7.2.1 Overview
  part of the OPC UA PackML information model. These Facets include information model ConformanceUnits , but they also include ConformanceUnits or Facets from the base OPC UA Profile specification . Table
• OPC-30050 – OPC UA for PackML - Common Object Model: PackML
  7.2.2.1 PackML Base Functionality Server Facet
  PackML Model PackML Base Version True This Profile includes a number of Profiles and ConformanceUnits
• OPC-30060 – OPC UA for Tobacco Machine Communication
  13.1 Conformance Units
  Conformance Units The following table defines the ConformanceUnits for the OPC UA Information Model for TMC. Table 238 - Conformance Units for TMC Category Title Description Server TMC Data Collection
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in that require the Node to be in the AddressSpace . The relations between Nodes ... ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition in the UANodeSet
• OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™
  11 Profiles and Conformance Units
  Profiles and Conformance Units Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7. The Profiles and ConformanceUnits for this specification are maintained in an online database
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  13.1 Conformance Units
  Conformance Units Table 75 defines the corresponding ConformanceUnits for the OPC UA Information Model for FDT. Table 75 - Conformance Units for FDT Category Title Description Server Server FDT DeviceType Support
• OPC-30140 – OPC UA for PROFINET
  7.2 Conformance Units and Profiles
  Conformance Units and Profiles This chapter defines the corresponding Profiles and Conformance Units for the OPC UA Information Model for PROFINET. Profiles are named groupings of Conformance Units . Facets
• OPC-30141 – OPC UA for PROFIenergy
  12.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for PE Energy Management . Table 61 - Conformance Units for PE Energy Management Category Title Description ... Functionality Information Model . Server PNEM Energy Management Support Supports at least one of the Conformance Units : PNEM Standby Management, PNEM Energy Measurement or PNEM Power Off. Server PNEM PROFIenergy Supports
• OPC-30142 – OPC UA for PROFINET Remote IO
  12.1 Conformance Units
  Conformance Units Table 135 defines the corresponding Conformance Units for the OPC UA Information Model for OPC UA for PROFINET Remote IO. Table 135 - Conformance Units
• OPC-30142 – OPC UA for PROFINET Remote IO
  12.2.2.3 PNRIO Base Server Profile
  PNRIO Base Server Profile From the PNRIO Conformance Units , the PNRIO Base Server Profile demands the PNRIO Channel Objects Conformance Unit only. Servers implementing this Profile provide Channel Objects
• OPC-30142 – OPC UA for PROFINET Remote IO
  12.2.2.4 PNRIO Group Server Profile
  PNRIO Group Server Profile From the PNRIO Conformance Units , the PNRIO Group Server Profile demands the PNRIO Channel Groups and the PNRIO Process Variables Conformance Units . Servers implementing this Profile
• OPC-30142 – OPC UA for PROFINET Remote IO
  12.2.2.5 PNRIO Grouped Channels Server Profile
  PNRIO Grouped Channels Server Profile From the PNRIO Conformance Units , the PNRIO Grouped Channels Server Profile demands the PNRIO Channel Groups and the PNRIO Channel Objects Conformance Units . Servers implementing ... components of Channel Group Objects . Table 140 - PNRIO Grouped Channels Server Profile Group Conformance Unit / Profile Title Mandatory / Optional PNRIO PNRIO Common Server Facet M PNRIO PNRIO Channel Groups
• OPC-30142 – OPC UA for PROFINET Remote IO
  12.2.2.6 PNRIO Full Grouped Channels Server Profile
  PNRIO Full Grouped Channels Server Profile From the PNRIO Conformance Units , the PNRIO Grouped Channels Server Profile demands the PNRIO Channel Groups, the PNRIO Channel Objects and the PNRIO Process ... Variables Conformance Units . Optionally RioChannelGroupConfigType Objects may be provided as components of Channel Group Objects . Table 141 - PNRIO Full Grouped Channels Server Profile Group Conformance Unit / Profile Title Mandatory / Optional
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  3.5.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  11.1 Conformance Units
  Conformance Units Table 62 defines the corresponding ConformanceUnits for the OPC UA Information Model for PROFINET Encoder. Table 62 - Conformance Units for PROFINET Encoder Category Title Description Server PNENC Measurement
• OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>
  11.2.2.2 PNENC Detector Server Profile
  Profile Table 64 defines a Profile containing the minimum OPC UA functionality and PNENC Conformance Units any PROFINET Encoder Server at least shall provide. Table 64 - PNENC Detector Server Profile
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model
  11.1 Conformance Units
  Conformance Units Table 50 defines the corresponding ConformanceUnits for the OPC UA Information Model for PROFINET GSD Generic Model. Table 50 - Conformance Units for PROFINET GSD Generic Model Category Title
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  3.5.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 10.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  10.1 Conformance Units
  Conformance Units Table 49 defines the corresponding ConformanceUnits for the OPC UA for Drive Information Model . Table 49 - Conformance Units for Drive Information Model Category Title Description Server PDRV Measurement
• OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives
  10.2.2.2 PDRV Small Server Profile
  Profile Table 51 defines a Profile containing the minimum OPC UA functionality and PDRV Conformance Units any PROFINET Drives Server at least shall provide. Intended to be implemented by Servers
• OPC-30200 – OPC UA for Commercial Kitchen Equipment
  22.2 Conformance Units and Profiles
  Conformance Units and Profiles This chapter defines the corresponding Profiles and Conformance Units for the OPC UA Information Model for commercial kitchen devices. Profiles are named groupings of Conformance Units
• OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 0 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components
  9 Profiles and Conformance Units
  Profiles and Conformance Units Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7 . The Profiles and ConformanceUnits for this specification are maintained in an online database
• OPC-30250 – OPC Unified Architecture for DEXPI
  11.1 Conformance Units
  Conformance Units Table defines the corresponding ConformanceUnits for the OPC UA Information Model for DEXPI. Table 218 - Conformance Units for DEXPI Category Title Description Server DEXPI Information Model Supports
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7 Profiles and Namespaces
  part of the OPEN-SCS OPC UA InformationModel . These Facets include OPEN-SCS InformationModel ConformanceUnits , but they also include ConformanceUnits or Facets from the OPC 10000-7 specification. They
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7.3.1 Overview
  Overview This section defines the ConformanceUnits that are specific to the OPC UA OPENSCS Information model. These ConformanceUnits are separated into ConformanceUnits that are Server specific and those that
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7.3.2 Server Conformance Units
  Server Conformance Units Table 70 defines the Server based ConformanceUnits . Table 70 - OPENSCS Server Information Model Category Title Description Server OPEN-SCS Base Functionality The server supports the BaseObjectModel. This
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7.3.3 Client Conformance Units
  Client Conformance Units Table 71 defines the Client based ConformanceUnits . Table 71 - OPENSCS Client Information Model Category Title Description Client OPENSCS Base Functionality Client The Client makes
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7.4 Profiles and Facets
  Profiles and Facets Profiles are named groupings of Conformance Units . Facets are Profiles that will be combined with other Facets or Profiles to define the complete functionality ... available for components (physical or virtual) that implement the OPEN-SCS PSS specification. Some Conformance Units . Facets and Profiles may not be implemented by all conformant products. Such optional functionality
• OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS
  7.4.1.1 OPENSCS Security Server Facet
  OPENSCS Security Server Facet The OPENSCS Security Server Facet defined in Table 72 includes ConformanceUnits for Servers that are not included in other OPC UA defined Facets and Profiles . This
• OPC-30270 – OPC UA for Asset Administration Shell (AAS)
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for I4AAS. Table 83 - I4AAS Conformance Units Definition Category Title Description Server I4AAS AAS Supports
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 9.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining the Nodes , with one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node
• OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics
  9.1 Conformance Units
  Conformance Units Table 133 defines the corresponding ConformanceUnits for the OPC UA Information Model for LADS Table 133 - Conformance Units for LADS Category Title Description Server LADS ActiveProgramType The server
• OPC-34100 – OPC UA for Energy Consumption Management
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-34100 – OPC UA for Energy Consumption Management
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Energy Consumption Management. Table 62 - Conformance Units for Energy Consumption Management Category Title Description ... EnergyDevicePowerOffType is supported. Server ECM Energy Management Support Supports at least one of the Conformance Units: ECM Standby Management, ECM Energy Measurement or ECM Sleep Mode WOL. Server ECM Energy
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  3.4.1.1 Node Definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 19.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks
  19.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machinery. Table 52 - Conformance Units for OPC UA for Machinery Category Title Description Server
• OPC-40001-2 – OPC UA for Machinery - Part 2: Process Values
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machinery - Process Values. Table 8 - Conformance Units for Machinery - Process Values Category Title Description
• OPC-40001-3 – OPC UA for Machinery - Part 3: Job Management
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machinery - Job Management. Table 22 - Conformance Units for Machinery - Job Management Category Title Description
• OPC-40001-4 – OPC UA for Machinery - Part 4: Energy Management
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machinery - Energy Management. Table 13 - Conformance Units for Machinery - Energy Management Category Title Description
• OPC-40001-101 – OPC UA for Machinery - Part 101: Result Transfer
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machinery - Result Transfer. Table 31 - Conformance Units for Machinery - Result Transfer Category Title Description
• OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Robotics. Table 122 - Conformance Units for Robotics Category Title Description Server Rob MotionDeviceSystem Base
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 10.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Cranes and Hoists. Table 34 - Conformance Units for Cranes and Hoists Category Title Description
• OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions
  36 Profiles and Conformance Units
  Profiles and Conformance Units This specification does not define Profiles and Conformance Units . They are defined by the specific Companion Specifications for the several machine types
• OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for OPC 40084-1. Table 18 - Conformance Units for OPC 40084-1 Category Title Description Server Extrusion Device Supports the ExtrusionDeviceType
• OPC-40084-2 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 2: Extrusion Line
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for OPC 40084-2. Table 32 - Conformance Units for OPC 40084-2 Category Title Description Server OPC 40084-2 Basic Support
• OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring
  13.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Machine Vision Part 2. Table 74 - Conformance Units for Machine Vision Part 2 Category
• OPC-40200 – OPC UA for Weighing Technology
  12.1 Conformance Units
  Conformance Units Table 162 defines the corresponding ConformanceUnits for the OPC UA Information Model for Weighing Technology. Table 162 - Conformance Units for OPC UA for Weighing Technology Category Title Description
• OPC-40210 – OPC UA for Geometric Measurement Systems
  12.2 Conformance Units
  Conformance Units Table 56 defines the corresponding ConformanceUnits for the OPC UA Information for GMS. Table 56 - Conformance Units for Geometric Measurement Systems Category Title Description Server GMS QualifiedToolLife Within
• OPC-40223 – OPC UA for Pumps and Vacuum Pumps
  9.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Pumps and Vacuum Pumps. Table 152 - Conformance Units for OPC UA for Pumps
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  9.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA for Compressed Air Systems Information Model. Table 162 - Conformance Units for OPC UA for Compressed Air Systems ... Attribute Historizing set true and the AccessLevel includes HistoryRead. Depending on the supported Conformance Units, these Variables are Energy and Power, VolumeFlowRate, or RunningTime and LoadedTime. Server CAS Energy Management
• OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems
  9.2.2.15 CAS Full Server Profile
  Profile This Profile defines the elements for a Main Control System which supports all ConformanceUnits . Table 177 - CAS Full Server Profile Group Conformance Unit / Profile Title M / O Profile Base
• OPC-40301 – OPC UA for Flat Glass Processing
  3.5.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 9.2 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40301 – OPC UA for Flat Glass Processing
  9.1 Overview
  Overview Meaning and significance of Profiles and ConformanceUnits are described in OPC 10000-7 . The Profiles and ConformanceUnits for this specification are also found in an online database which
• OPC-40301 – OPC UA for Flat Glass Processing
  9.2 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for glass technology. Table 39 - Conformance Units for glass technology Category Title Description Server FlatGlass
• OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management
  9.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Powertrain . Table 159 - Conformance Units for Powertrain Category Title Description Server Powertrain Base System
• OPC-40444 – OPC UA for Textile Testing Devices
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40444 – OPC UA for Textile Testing Devices
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Textile Testing Devices. Table 60 - Conformance Units for Textile Testing Devices Category Title Description ... TextileTestingDeviceType is/are available in the AddressSpace 3:Machines Folder in the model. This conformance unit includes the test of the DataTypes ExchangeablePartDataType , OptionalModuleDataType and TestProcedureIdDataType . Server TTD_RecipeManagementType The RecipeManagementType
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Joining System. Table 252 - Conformance Units for Joining System Category Title Description Server
• OPC-40451-1 – OPC UA for Tightening Systems - Part 1: General
  6.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Tightening System. Table 3 - Conformance Units for Tightening System Category Title Description Server
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  14.1 ConformanceUnits
  ConformanceUnits This section defines the corresponding ConformanceUnits for the OPC UA Information Model for Machine Tools. Table 120 - ConformanceUnits for Machine Tools Category Title Description Server MachineTool MachineToolType Mandatory Nodes
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  14.2.2.5 MachineTool Tools Server Facet
  tools in the machine tool. If the list of tools is used dynamically, the ConformanceUnits MachineTool Event Propagation and MachineTool Event Tools shall be provided. Table 125 - MachineTool Tools Server
• OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management
  14.2.2.9 MachineTool Errors and Alerts Server Facet
  MachineTool Errors and Alerts Server Facet This Facet contains the ConformanceUnits concerning errors and alerts sent by the machine tool. Table 129 - MachineTool Errors and Alerts Server Facet Group ConformanceUnit
• OPC-40502 – OPC UA for Computerized Numerical Control (CNC) Systems - for CNC Systems: OPC UA Information Model
  8.4 OPC UA Conformance Units and Profiles
  Conformance Units and Profiles This chapter defines the corresponding Profiles and Conformance Units for the "OPC UA Information Model for CNC Systems". Profiles are named groupings of Conformance ... Information Model for CNC systems" companion standard. Table 34 describes the Conformance Units included in the minimum needed facet. It allows to realize the base mechanisms of this
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40503-1 – OPC UA for Metal Forming - Part 1: General
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Metal Forming . Table 36 - Conformance Units for Metal Forming Category Title Description Server MetalForming
• OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 10.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Cutting Tools. Table 23 - Conformance Units for Cutting Tools Category Title Description Server CuttingTool
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 9.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40505 – OPC UA for Wireless Machine Tool Peripherals
  9.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for OPC UA for Wireless Machine Tool Peripherals. Table 57 - Conformance Units
• OPC-40530 – OPC UA for Laser Systems
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40530 – OPC UA for Laser Systems
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for LaserSystems. Table 33 - Conformance Units for Laser Systems Category Title Description Server LaserSystems LaserSystemType
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Woodworking. Table 44 - Conformance Units for Woodworking Category Title Description Server Woodworking WwMachineType Mandatory
• OPC-40560 – OPC UA for Mining - General
  3.2.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in Table 2 that require the Node to be in the AddressSpace . The relations ... between Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40560 – OPC UA for Mining - General
  10.1 Conformance Units
  Conformance Units Table 20 defines the corresponding Conformance Units for the OPC UA Information Model for Mining- General. Table 20 - Conformance Units for OPC 40560: Mining-General Category Title Description
• OPC-40561-2 – OPC UA for Mining - Extraction - Part 2: Shearer Loader
  9.1 Conformance Units
  Conformance Units Table 15 defines the corresponding Conformance Units for the OPC UA Information Model for OPC 40561-2: Shearer Loader. Table 15 - Conformance Units for OPC 40561-2: Shearer
• OPC-40562-1 – OPC UA for Mining - Loading - Part 1: General
  6.1 Conformance Units
  Conformance Units Table 11 defines the corresponding Conformance Units for the OPC UA Information Model for OPC 40562-1: OPC UA for Mining - Loading - General. Table 11 - Conformance Units
• OPC-40563-1 – OPC UA for Mining - Transport Dumping - Part 1: General
  6.1 Conformance Units
  Conformance Units Table 21 defines the corresponding ConformanceUnits for the OPC UA Information Model for OPC 40563-1: Transport and Dumping General. Table 21 - Conformance Units
• OPC-40563-2 – OPC UA for Mining - Transport Dumping - Part 2: Armoured Face Conveyor
  9.1 Conformance Units
  Conformance Units Table 9 defines the corresponding ConformanceUnits for the OPC UA Information Model of the AFC. Table 9 - Conformance Units for OPC 40563-2: AFC Category Title Description Server
• OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Mining - Transport Dumping - Conveying. Table 61 - Conformance Units for OPC UA for Mining - Transport
• OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying
  8.2.2.2 Mining Conveyor Basic Server Facet
  Facet defines support for base Mining Conveying functionality. At least two of the optional Conformance Units must be implemented. Table 63 - Mining Conveyor Basic Server Facet Group Conformance Unit/ Profile
• OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying
  8.2.2.3 Mining Conveyor Advanced Asset Management Facet
  support for advanced asset management of a conveyor. At least five of the optional Conformance Units of the Mining Conveyor Basic Server Facet must be implemented. Table 64 - Mining Conveyor
• OPC-40563-4 – OPC UA for Mining - Transport Dumping - Part 4: Conveying
  8.2.2.4 Mining Conveyor Advanced Facet
  usage of the defined ObjectTypes in this specification. At least eight of the optional Conformance Units must be implemented. Table 65 - Mining Conveyor Advanced Facet Group Conformance Unit/ Profile Title
• OPC-40564-2 – OPC UA for Mining - Mineral Processing - Part 2: Rock Crusher
  8.1 Conformance Units
  Conformance Units Table 6 defines the corresponding Conformance Units for the OPC UA Information Model for OPC 40564-2: Rock Crusher. Table 6 - Conformance Units for OPC 40564-2: Rock
• OPC-40565-2 – OPC UA for Mining - Development Support - Part 2: Roof Support System
  8.1 Conformance Units
  Conformance Units Table 6 defines the corresponding Conformance Units for the OPC UA Information Model for OPC 40565-2: RSS. Table 6 - Conformance Units for OPC 40565-2: RSS Category
• OPC-40565-3 – OPC UA for Mining - Development - Part 3: Dozer
  8.1 Conformance Units
  Conformance Units Table 13 defines the corresponding Conformance Units for the OPC UA Information Model for Dozer. Table 13 - Conformance Units for OPC 40565-3: Dozer Category Title Description Server
• OPC-40567-2 – OPC UA for Mining - PELO Services - Part 2: Face Alignment System
  7.1 Conformance Units
  Conformance Units Table 4 defines the corresponding Conformance Units for the OPC UA Information Model for OPC 40567-2: Face Alignment System. Table 4 - Conformance Units
• OPC-40568-1 – OPC UA for Mining - External Standards - Part 1: IREDES
  8.1 Conformance Units
  Conformance Units Table 85 defines the corresponding ConformanceUnits for the OPC UA Information Model for OPC 40568- IREDES Table 85 - Conformance Units for OPC 40568 IREDES Category Title Description Server
• OPC-40570 – OPC UA for Wire Harness Manufacturing
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 13.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40570 – OPC UA for Wire Harness Manufacturing
  13.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Wire Harness Manufacturing. Table 76 - Conformance Units for WireHarness Manufacturing Category Title Description Server
• OPC-40600 – OPC UA for Weihenstephan Standards
  10.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for OPC UA for Weihenstephan Standards. Table 28 - Conformance Units for OPC UA for Weihenstephan
• OPC-40700 – OPC UA for Surface Technology - General Types
  3.3.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40700 – OPC UA for Surface Technology - General Types
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Surface Technology General Types. Table 30 - Conformance Units for OPC UA for Surface Technology
• OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment
  3.3.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Cleaning and Pretreatment machinery. Table 53 - Conformance Units for Cleaning and Pretreatment Machinery Category ... STComp…Type) defined in this specification on the OPC UA Server, with its Basic Conformance Unit implemented. Server STCleaningPretreatment STSysAuxiliaryType Basic Type definition of the STSysAuxiliaryType Object is available
• OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment
  8.2.2.2 STCleaningPretreatment Basic Server Facet
  Facet for basic Cleaning and Pretreatment Machinery functionality. At least one of the optional Conformance Units must be implemented. Table 55 - STCleaningPretreatment Basic Server Facet Group Conformance Unit / Profile Title
• OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment
  8.2.2.3 STCleaningPretreatment Identification Server Facet
  Cleaning and Pretreatment Machinery functionality with system/component identification. At least one of the optional Conformance Units must be implemented. Table 56 - STCleaningPretreatment Identification Server Facet Group Conformance Unit / Profile Title
• OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment
  8.2.2.4 STCleaningPretreatment Advanced Server Facet
  Facet for advanced Cleaning and Pretreatment Machinery functionality. At least one of the optional Conformance Units must be implemented. Table 57 - STCleaningPretreatment Advanced Server Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  3.3.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for ST - OCT - Material Supply Systems. Table 40 - Conformance Units for ST - OCT - Material Supply
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.2 MSS Basic Server Facet
  base ST - OCT - Material Supply Systems functionality. At least three of the optional Conformance Units must be implemented. Table 42 - MSS Basic Server Facet Group Conformance Unit / Profile Title Mandatory
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.3 MSS Advanced Server Facet
  advanced ST - OCT - Material Supply Systems functionality. At least six of the optional Conformance Units must be implemented. Table 43 - MSS Advanced Server Facet Group Conformance Unit / Profile Title Mandatory
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.4 MSS Advanced Monitoring Server Facet
  advanced ST - OCT - Material Supply Systems functionality. At least four of the optional Conformance Units must be implemented. Table 44 - MSS Advanced Monitoring Server Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.5 MSS Advanced STSysMaterialTransportLine Facet
  This Facet defines support for advanced functionality of the implemented StSysMaterialTransportLineType instances. All listed Conformance Units must be implemented. Table 45 - MSS Advanced STSysMaterialTransportLine Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.6 MSS Advanced STSysRam Facet
  This Facet defines support for advanced functionality of the implemented STSysRamType instances. All listed Conformance Units must be implemented. Table 46 - MSS Advanced STSysRam Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.7 MSS Advanced STCompRam Facet
  This Facet defines support for advanced functionality of the implemented STCompRamType instances. All listed Conformance Units must be implemented. Table 47 - MSS Advanced STCompRam Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.8 MSS Advanced STCompPowderSieve Facet
  This Facet defines support for advanced functionality of the implemented STCompPowderSieveType instances. All listed Conformance Units must be implemented. Table 48 - MSS Advanced STCompPowderSieve Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.9 MSS Advanced STCompProcessValve Facet
  This Facet defines support for advanced functionality of the implemented STCompProcessValveType instances. All listed Conformance Units must be implemented. Table 49 - MSS Advanced STCompProcessValve Facet Group Conformance Unit / Profile Title
• OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems
  8.2.2.10 MSS Advanced STSysVessel Facet
  This Facet defines support for advanced functionality of the implemented STSysVesselType instances. All listed Conformance Units must be implemented. Table 50 - MSS Advanced STSysVessel Facet Group Conformance Unit / Profile Title
• OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Shot Blasting Technology. The ConformanceUnits are meant to map one specific instance ... ConformanceUnits. Therefor it is recommended to separate the instances in different namespaces. Table 43 - Conformance Units for OPC UA for Shot Blasting Technology Category Title Description Server ShotBlastMachine Basic
• OPC-40719 – OPC UA for Plasma Surface Technology
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 8.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40719 – OPC UA for Plasma Surface Technology
  8.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Plasma Surface Technology. Table 59 - Conformance Units for OPC UA for Plasma Surface Technology
• OPC-40719 – OPC UA for Plasma Surface Technology
  8.2.2.2 PST Basic Server Facet
  defines support for base Plasma Surface Technology functionality. At least five of the optional Conformance Units must be implemented. Table 61 - PST Basic Server Facet Group Conformance Unit/ Profile Title
• OPC-40719 – OPC UA for Plasma Surface Technology
  8.2.2.3 PST Advanced Server Facet
  defines support for advanced Plasma Surface Technology functionality. At least five of the optional Conformance Units must be implemented. Table 62 - PST Advanced Server Facet Group Conformance Unit/ Profile Title
• OPC-40719 – OPC UA for Plasma Surface Technology
  8.2.2.4 PST Low Pressure Facet
  support of Low Pressure Plasma Surface Technology functionality. At least one of the optional Conformance Units has to be implemented. Table 63 - PST Low Pressure Facet Group Conformance Unit/ Profile
• OPC-40719 – OPC UA for Plasma Surface Technology
  8.2.2.5 PST Atmospheric Pressure Facet
  support of Atmospheric Pressure Plasma Surface Technology functionality. At least one of the optional Conformance Units must be implemented. Table 64 - PST Atmospheric Pressure Facet Group Conformance Unit/ Profile Title
• OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)
  3.4.1.1 Node definitions
  Each Type Node or well-known Instance Node defined shall have one or more ConformanceUnits defined in 11.1 that require the Node to be in the AddressSpace . The relations between ... Nodes and ConformanceUnits are defined at the end of the tables defining Nodes , one row per ConformanceUnit . The ConformanceUnits are reflected in the Category element for the Node definition
• OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)
  11.1 Conformance Units
  Conformance Units This chapter defines the corresponding Conformance Units for the OPC UA Information Model for Process Air Extraction and Filtration Systems. Table 109 - Conformance Units