Sometimes it is important to know, if a safety parameter of a device in the plant or machine, set by an engineering tool, was changed. The following table describes criteria to detect changes.
Implements AM9.
Table 15 – Criteria for safety device parameter change
|
Changed Parameter |
Criteria |
PROFINET Service |
|
Device |
IM_Signature of DAP has a changed value |
RecordRead I&M4 |
|
ModuleSubmodule |
IM_ Signature of module/submodule has a changed value |
RecordRead I&M4 |
|
Asset |
Not available |
|