12.1.3 CrimpInputDataType

This structure contains information needed for the crimping process. The structure is defined in Table 54.

Table 54 – CrimpInputDataType Structure (with field that allows subtypes)
NameTypeDescriptionAllow
Subtypes
CrimpInputDataTypestructureSubtype of ProcessInputDataType defined in this specification.

ReferencedElement 

7:WireMountingIdDataTypeReferences the product element for which this process is defined. False

VerifyCrimpHeight

0:Boolean[1] If set, the NominalCrimpHeight must be measured and returned during the verify and learn process, and the ActualCrimpHeight will be sent back. False

VerifyCrimpWidth

0:Boolean[1]If set, the NominalCrimpWidth must be measured and returned during the verify and learn process, and the ActualCrimpWidth will be sent back. False

VerifyInsulationCrimpHeight

0:Boolean[1]If set, the NominalInsulationCrimpHeight must be measured and returned during the verify and learn process, and the ActualInsulationCrimpHeight will be sent back. False

VerifyInsulationCrimpWidth

0:Boolean[1]If set, the NominalInsulationCrimpWidth must be measured and returned during the verify and learn process, and the ActualInsulationCrimpWidth will be sent back. False

VerifyPullOutForce

0:Boolean[1]If set, the PullOutForce must be measured and will be sent back. False

CrimpForceMonitoring

0:Boolean[1]If set, the CrimpForce is monitored. False

Its representation in the AddressSpace is defined in Table 55.

Table 55 – CrimpInputDataType definition
Attribute Value
BrowseName CrimpInputDataType
IsAbstractFalse
References NodeClass BrowseName DataType TypeDefinition Other
Subtype of the ProcessInputDataType defined in this specification.
Conformance Units
WireHarness CrimpInputDataType