Process related DataTypes – OPC UA for Wire Harness Manufacturing

This section contains all DataTypes related to a process.

This structure contains information that is needed for all processes. Subtypes may add process-specific fields. The structure is defined in Table 52.

Table 52 – ProcessInputDataType Structure (with field that allows subtypes)

Name	Type	Description	Allow Subtypes
ProcessInputDataType	structure	Subtype of 0:Structure defined in OPC 10000-3.
ToolType	0:String[1]	Indicates the ideal process module or the preferred tool (e.g., the part version).	False
ProcessDescription	0:String[1]	A detailed explanation of the process, outlining its purpose, scope, and implementation steps.	False
id	0:TrimmedString	A unique identifier for the process, used for tracking and reference purposes.	False

Its representation in the AddressSpace is defined in Table 53.

Table 53 – ProcessInputDataType definition

References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the 0:Structure defined in OPC 10000-3.

Conformance Units
WireHarness ProcessInputType

This structure contains information needed for the crimping process. The structure is defined in Table 54.

Table 54 – CrimpInputDataType Structure (with field that allows subtypes)

Name	Type	Description	Allow Subtypes
CrimpInputDataType	structure	Subtype of ProcessInputDataType defined in this specification.
ReferencedElement	7:WireMountingIdDataType	References the product element for which this process is defined.	False
VerifyCrimpHeight	0:Boolean[1]	If set, the NominalCrimpHeight must be measured and returned during the verify and learn process, and the ActualCrimpHeight will be sent back.	False
VerifyCrimpWidth	0:Boolean[1]	If set, the NominalCrimpWidth must be measured and returned during the verify and learn process, and the ActualCrimpWidth will be sent back.	False
VerifyInsulationCrimpHeight	0:Boolean[1]	If set, the NominalInsulationCrimpHeight must be measured and returned during the verify and learn process, and the ActualInsulationCrimpHeight will be sent back.	False
VerifyInsulationCrimpWidth	0:Boolean[1]	If set, the NominalInsulationCrimpWidth must be measured and returned during the verify and learn process, and the ActualInsulationCrimpWidth will be sent back.	False
VerifyPullOutForce	0:Boolean[1]	If set, the PullOutForce must be measured and will be sent back.	False
CrimpForceMonitoring	0:Boolean[1]	If set, the CrimpForce is monitored.	False

Its representation in the AddressSpace is defined in Table 55.

Table 55 – CrimpInputDataType definition

References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessInputDataType defined in this specification.

Conformance Units
WireHarness CrimpInputDataType

This structure contains information needed for the cut process. The structure is defined in Table 56.

Table 56 – CutInputDataType Structure (with field that allows subtypes)

Name	Type	Description	Allow Subtypes
CutInputDataType	structure	Subtype of ProcessInputDataType defined in this specification.
ReferencedElement	7:WireElementReferenceIdDataType	References the product element for which this process is defined.	False
VerifyWireLength	0:Boolean[1]	The operator must verify the length of the wire	False

Its representation in the AddressSpace is defined in Table 57.

Table 57 – CutInputDataType definition

References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessInputDataType defined in this specification.

Conformance Units
WireHarness CutInputDataType

This structure contains information needed for the seal process. The structure is defined in Table 58.

Table 58 – SealInputDataType Structure (with field that allows subtypes)

Name	Type	Description	Allow Subtypes
SealInputDataType	structure	Subtype of ProcessInputDataType defined in this specification.
ReferencedElement	7:WireMountingIdDataType	References the product element for which this process is defined.	False
MonitorSealPosition	0:Boolean[1]	Triggers if the position should be monitored and the result returned.	False

Its representation in the AddressSpace is defined in Table 59.

Table 59 – SealInputDataType definition

References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessInputDataType defined in this specification.

Conformance Units
WireHarness SealInputDataType

This structure contains information needed for the strip process. The structure is defined in Table 60.

Table 60 – StripInputDataType Structure (with field that allows subtypes)

Name	Type	Description	Optional
StripInputDataType	structure	Subtype of ProcessInputDataType defined in this specification.
ReferencedElement	7:WireEndIdDataType	References the product element for which this process is defined.	False
StrippingLengthMonitoring	0:Boolean[1]	The operator must monitor the length of the strip.	False

Its representation in the AddressSpace is defined in Table 61.

Table 61 – StripInputDataType definition

References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the ProcessInputDataType defined in this specification.

Conformance Units
WireHarness StripInputDataType