Search

Scope: Core (OPC-10000-*) All specs

156 result(s) for ModellingRule

OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

3.1.12 ModellingRule

ModellingRule metadata of an InstanceDeclaration that defines how the InstanceDeclaration will be used for instantiation and also defines subtyping rules for an InstanceDeclaration
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

3.3.2 Conventions for defining NodeClasses

column (optional or mandatory) does not imply a specific ModellingRule for Properties . Different Server implementations will choose to use ModellingRules appropriate for them
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

4.6.4 Instantiation of complex TypeDefinitionNodes

shows an instance of the TypeDefinitionNode "AI_BLK_TYPE", where the ModellingRule Mandatory , defined in 6.4.4.4.1 , was applied for its containing Variable . Thus, an instance
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

4.10.2 Interface Model

Interface shall have for each BrowsePath a similar Node (see 6.2.4) with the ModellingRule Mandatory using the same BrowsePath in the fully-inherited InstanceDeclarationHierarchy of the ObjectType . The rules ... Interface should have for each BrowsePath a similar Node (see 6.2.4) with the ModellingRule Mandatory or Optional using the same BrowsePath in the fully-inherited InstanceDeclarationHierarchy of the ObjectType
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.5.1 Object NodeClass

Properties of the Object . HasModellingRule 0..1 Objects can point to at most one ModellingRule Object using a HasModellingRule Reference (see 6.4.4 for details on ModellingRules ). HasTypeDefinition 1 The HasTypeDefinition ... this series of standards may define additional Properties for Objects . To specify its ModellingRule , an Object can use at most one HasModellingRule Reference pointing to a ModellingRule Object . ModellingRules
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.5.2 ObjectType NodeClass

ObjectType that all instances should use by default. This Property has no ModellingRule . It shall only be on the type Node . The ObjectType NodeClass inherits the base Attributes from
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.6.2 Variable NodeClass

Fields is unknown. References HasModellingRule 0..1 Variables can point to at most one ModellingRule Object using a HasModellingRule Reference (see 6.4.4 for details on ModellingRules ). HasProperty 0..* HasProperty References ... defines additional rules when using the Services for automation data. To specify its ModellingRule , a Variable can use at most one HasModellingRule Reference pointing to a ModellingRule Object . ModellingRules
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.7.1 Method NodeClass

Properties for the Method . HasModellingRule 0..1 Methods can point to at most one ModellingRule Object using a HasModellingRule Reference (see 6.4.4 for details on ModellingRules ). GeneratesEvent 0..* GeneratesEvent References ... this Reference is defined on an InstanceDeclaration the TargetNode shall use the Mandatory ModellingRule . <other References> 0..* Methods may contain other References . Standard Properties NodeVersion O String
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.2.1 InstanceDeclaration

InstanceDeclaration An InstanceDeclaration is an Object , Variable or Method that references a ModellingRule with a HasModellingRule Reference and is the TargetNode of a hierarchical Reference from a TypeDefinitionNode or another
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.2.2 Instances without ModellingRules

Instances without ModellingRules If no ModellingRule exists then the Node is neither considered for instantiation of a type nor for subtyping. If a Node referenced by a TypeDefinitionNode does ... reference a ModellingRule it indicates that this Node only belongs to the TypeDefinitionNode and not to the instances. For example, an ObjectType Node may contain a Property that describes scenarios
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.3.2 Fully-inherited InstanceDeclarationHierarchy

such an InstanceDeclaration are added to the table. Hierarchical References to Nodes without a ModellingRule are not considered. Table 19 - The InstanceDeclarationHierarchy for BetaType BrowsePath NodeId
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.3.3 Overriding InstanceDeclarations

append optional arguments after all existing arguments of the supertype's Method InstanceDeclaration . The ModellingRule of the overriding InstanceDeclaration may be changed as defined in 6.4.4.2 . Each overriding InstanceDeclaration needs
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.2 Creating an Instance

same hierarchy of Node s beneath the new Object or Variable depending on the ModellingRule of each InstanceDeclaration . Standard ModellingRules are defined in 6.4.4.4 . The Node s within the newly ... same BrowsePath as an InstanceDeclaration of its TypeDefinition which has an optional or mandatory ModellingRule except for the one based on the InstanceDeclaration . Figure 27 provides a simple example
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.1 General

define additional Properties for ModellingRules . OPC 10000-5 specifies the representation of the ModellingRule Objects, their Properties and their type in the AddressSpace . Subclause 6.4.4.3 defines how the ModellingRule ... changed when instantiating InstanceDeclarations with respect to the Properties . Subclause 6.4.4.2 defines how the ModellingRule may be changed when overriding InstanceDeclarations in subtypes with respect to the Properties
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.3 Instantiation Rules for Properties of ModellingRules

required that newly created or referenced instances based on InstanceDeclarations have a ModellingRule , however, it is allowed that they have any ModellingRule independent of the ModellingRule of their InstanceDeclaration ... valid instances of Type_A, although B of A1 has no ModellingRule and B of A3 has a different ModellingRule than B of Type_A. In the second case
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.4.1 Mandatory

Mandatory An InstanceDeclaration marked with the ModellingRule Mandatory means that for each existing BrowsePath on the instance a similar Node shall exist, but it is not defined whether ... InstanceDeclaration SP1. Figure 31 illustrates the example. Figure 31 - Use of the Standard ModellingRule Mandatory In 6.4.4.4.2 a complex example combining the Mandatory and Optional ModellingRules is given
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.4.3 ExposesItsArray

ExposesItsArray The ExposesItsArray ModellingRule exposes a special semantic on VariableTypes having a single- or multidimensional array as the data type. It indicates that each value of the array will also ... exposed as a Variable in the AddressSpace . The ExposesItsArray ModellingRule can only be applied on InstanceDeclarations of NodeClass Variable that are part of a VariableType having a single- or multidimensional
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.4.4 OptionalPlaceholder

OptionalPlaceholder For Object and Variable the intention of the ModellingRule OptionalPlaceholder is to expose the information that a complex TypeDefinition expects from instances of the TypeDefinition to add instances with ... Figure 35 , where an instance Device A adds two DeviceParameters in the Folder. The ModellingRule OptionalPlaceholder adds no additional constraints on instances of the TypeDefinition . It just provides useful information
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.4.4.4.5 MandatoryPlaceholder

MandatoryPlaceholder For Object and Variable the ModellingRule MandatoryPlaceholder has a similar intention as the ModellingRule OptionalPlaceholder . It exposes the information that a TypeDefinition expects of instances of the TypeDefinition ... valid because it does not provide a DeviceParameter at all. The ModellingRule MandatoryPlaceholder requires that each instance provides at least one instance with the TypeDefinition of the InstanceDeclaration
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.5 Changing Type Definitions that are already used

fulfilled. For example, it is not allowed to add a Property using the ModellingRule Mandatory on a type if instances of this type exist without the Property . In that case
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

7.12 HasModellingRule ReferenceType

subtype of NonHierarchicalReferences . The semantic of this ReferenceType is to bind the ModellingRule to an Object , Variable or Method . The ModellingRule mechanisms are described in 6.4.4 . The SourceNode of this ... Object , Variable or Method . The TargetNode shall be an Object of the ObjectType "ModellingRule" or one of its subtypes. Each Node shall be the SourceNode of at most
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

7.22.2 Differences between HasStructuredComponent and ExposesItsArray

multi-dimensional array of a Variable as subvariables. The same is true for the ModellingRule ExposesItsArray . However, both concepts handle this differently, as described in this section. Using the HasStructuredComponent ... achieved when subscribing to the corresponding IndexRange on the parent Variable . Using the ExposesItsArray ModellingRule , the BrowseName of the subvariables are not defined and do not reflect the place
OPC-10000-4 – OPC Unified Architecture - Part 4: Services

5.8.2.1 Description

same hierarchy of Node s beneath the new Object or Variable depending on the ModellingRule of each InstanceDeclaration . All Nodes with a ModellingRule of Mandatory shall be created
OPC-10000-4 – OPC Unified Architecture - Part 4: Services

5.12.2.2 Parameters

Method specified in methodId. In this case the Method shall not have a ModellingRule . See OPC 10000-3 for a description of Objects and their Methods . methodId NodeId NodeId
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

3.3 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

8.4.1 ExposesItsArray

ExposesItsArray The ModellingRule ExposesItsArray is defined in OPC 10000-3 . Its representation in the AddressSpace, the " ExposesItsArray " Object, is formally defined in Table 113 . Table 113 - ExposesItsArray definition
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

8.4.2 Mandatory

Mandatory The ModellingRule Mandatory is defined in OPC 10000-3 . Its representation in the AddressSpace, the " Mandatory " Object, is formally defined in Table 114 . Table 114 - Mandatory definition
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

8.4.3 Optional

Optional The ModellingRule Optional is defined in OPC 10000-3 . Its representation in the AddressSpace , the " Optional " Object, is formally defined in Table 115 . Table 115 - Optional definition
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

8.4.4 OptionalPlaceholder

OptionalPlaceholder The ModellingRule OptionalPlaceholder is defined in OPC 10000-3 . Its representation in the AddressSpace , the " OptionalPlaceholder " Object, is formally defined in Table 116 . Table 116 - OptionalPlaceholder definition
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

8.4.5 MandatoryPlaceholder

MandatoryPlaceholder The ModellingRule MandatoryPlaceholder is defined in OPC 10000-3 . Its representation in the AddressSpace , the " MandatoryPlaceholder " Object, is formally defined in Table 117 . Table 117 - MandatoryPlaceholder definition
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.5.2 ConditionType

ConditionType definition Attribute Value BrowseName ConditionType IsAbstract True References NodeClass BrowseName DataType TypeDefinition ModellingRule Subtype of the BaseEventType defined in 10000-5 HasSubtype ObjectType DialogConditionType Defined in Clause 5.6.2 HasSubtype ... HasProperty Variable FalseState LocalizedText PropertyType The empty "Others" column indicates that no ModellingRule applies. The ConditionType inherits all Properties of the BaseEventType . Their semantic is defined
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.6.2 DialogConditionType

HasProperty Variable FalseState LocalizedText PropertyType The empty " Others" column indicates that no ModellingRule applies. The DialogConditionType inherits all Properties of the ConditionType . DialogState/Id when set to True indicates
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.7.2 AcknowledgeableConditionType

AcknowledgeableConditionType definition Attribute Value BrowseName AcknowledgeableConditionType IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Subtype of the ConditionType defined in clause 5.5.2 . HasSubtype ObjectType AlarmConditionType Defined in Clause 5.8.2 HasComponent ... HasProperty Variable FalseState LocalizedText PropertyType The empty " Others" column indicates that no ModellingRule applies. The AcknowledgeableConditionType inherits all Properties of the ConditionType . AckedState when False indicates that
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.8.2 AlarmConditionType

HasProperty Variable FalseState LocalizedText PropertyType The empty " Others" column indicates that no ModellingRule applies. The AlarmConditionType inherits all Properties of the AcknowledgeableConditionType . The following states are sub-states
OPC-10000-9 – OPC Unified Architecture - Part 9: Alarms & Conditions

5.8.20 NonExclusiveLimitAlarmType

HasProperty Variable FalseState LocalizedText PropertyType The empty " Others" column indicates that no ModellingRule applies. HighHighState , HighState , LowState , and LowLowState represent the non-exclusive states. As an example
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.9 StateType

using a HasComponent Reference or a subtype of HasComponent and shall not have a ModellingRule as they are not applied on the instances. The StateType is formally defined in Table ... StateType definition Attribute Value BrowseName StateType IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Subtype of the BaseObjectType defined in OPC 10000-5 HasProperty Variable StateNumber UInt32 PropertyType Mandatory HasSubtype
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.11 TransitionType

using a HasComponent Reference or a subtype of HasComponent and shall not have a ModellingRule as they are not applied on the instances. Each valid Transition shall have exactly ... TransitionType definition Attribute Value BrowseName TransitionType IsAbstract False References NodeClass BrowseName DataType TypeDefinition ModellingRule Subtype of the BaseObjectType defined in OPC 10000-5 HasProperty Variable TransitionNumber UInt32 PropertyType Mandatory Conformance
OPC-10000-16 – OPC Unified Architecture - Part 16: State Machines

4.4.19 Special Restrictions on subtyping StateMachines

instantiated, this information is only provided on the ObjectType . They have no ModellingRule , and thus, also the inheritance of States and Transitions is not defined. Therefore, the following rules apply
OPC-10000-81 – OPC Unified Architecture - Part 81: UAFX Connecting Devices and Information Model

3.3.1 Usage of Other column in type definitions

Other Characteristics Name Short Name Description Mandatory M The Node has the Mandatory ModellingRule . Optional O The Node has the Optional ModellingRule . MandatoryPlaceholder MP The Node has the MandatoryPlaceholder ModellingRule ... OptionalPlaceholder OP The Node has the OptionalPlaceholder ModellingRule . ReadOnly RO The Node AccessLevel Attribute has the CurrentRead bit set but not the CurrentWrite bit. ReadWrite RW The Node AccessLevel Attribute
OPC-10000-83 – OPC Unified Architecture - Part 83: UAFX OfflineEngineering

A.7 ReferenceType mapping

type and is marked with the Modelling Rule "OPC:TypeOnly" (see A.11.2.2 ). ModellingRule ModellingRuleType Present on the destination interface to indicate the UA ModellingRule of the destination ... missing, the ModellingRule "Optional" shall be assumed. RefClassConnectsToPath xs:string Indicates the AML path to the only other InterfaceClass that this interface shall be allowed to connect
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

4.4.1 Model

FunctionalGroup can be hidden on an instance the TypeDefinition shall use an appropriate ModellingRule like "Optional". If desirable, Nodes can be also children of FunctionalGroups . If such Nodes
OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation

3.3.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10030 – OPC Unified Architecture - Common Object Model: ISA-95

3.4 OPC UA Notation

Notation This standard uses ModellingRule that are OptionalPlaceholder and MandatoryPlaceholder to define instance declarations, and defines a rule that the BrowseName of instance declarations having an OptionalPlaceholder or MandatoryPlaceholder ModellingRule ... description of a table. The BrowseName of a Node that has OptionalPlaceholder or MandatoryPlaceholder ModellingRule are described with angle brackets, which denotes that the name is not fixed. For example
OPC-10030 – OPC Unified Architecture - Common Object Model: ISA-95

5.1.7.1 General

that represents a relationship between modelling targets and is represented by UML Association and by OPC UA ReferenceType (see Table 6 ). Table 6 - Transformation rule of a ISA95Reference ... name of ReferenceType, and cardinality of the association may be mapped into a Modelling Rule of target Node of the Reference
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-10100-1 – OPC UA for WoT Connectivity - Part 1: API Definition

3.4.1.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30010 – OPC UA for AutoId Devices - AutoID: OPC UA for AutoId Devices

3.4.1 Conventions for Node descriptions

that is not set "--" will be used. References NodeClass BrowseName DataType TypeDefinition ModellingRule ReferenceType name NodeClass of the Target Node . BrowseName of the target Node . If the Reference ... Variables . TypeDefinition Node of the referenced Node , only applicable for Variables and Objects . Referenced ModellingRule of the referenced Object . Notes - Notes referencing footnotes of the table content. Attributes are defined
OPC-30020 – MDIS OPC UA Companion Specification

10.5.2 Object Collection, Aggregation and Extension Definition

DiscreteItemType to the newly created subtype of an MDIS ObjectType . Yes Change ModellingRule from Optional -> Mandatory for any of existing properties or components. Yes Table 123 describes rules
OPC-30040 – OPC UA for AutomationML - Xxx: OPC UA Information Model for AutomationML

3.3.2 Conventions for Node descriptions

that is not set "--" will be used. References NodeClass BrowseName DataType TypeDefinition ModellingRule ReferenceType name NodeClass of the Target Node . BrowseName of the target Node . If the Reference ... Attributes of the referenced Node , only applicable for Variables and Objects . Referenced ModellingRule of the referenced Object . Notes - Notes referencing footnotes of the table content. Attributes are defined by providing
OPC-30050 – OPC UA for PackML - Common Object Model: PackML

3.8 OPC UA Notation

defines a rule that the BrowseName of instance declarations having an OptionalPlaceholder or MandatoryPlaceholder ModellingRule be enclosed in angle brackets (<>). Originally, this rule is defined ... description of a table. The BrowseName of a Node that has OptionalPlaceholder or MandatoryPlaceholder ModellingRule are described with angle brackets, which denotes that the name is not fixed. For example
OPC-30050 – OPC UA for PackML - Common Object Model: PackML

4.3.4.3 Companion Specifications

Example ObjectType Definition Attribute Value BrowseName WidgetType IsAbstract False Reference NodeClass BrowseName DataType TypeDefinition ModellingRule Subtype of the BaseObjectType from OPC 10000-5 . HasProperty Variable Color String PropertyType Mandatory HasProperty ... NodeClass Nodes ) and the TypeDefinition is the ObjectType or VariableType for the child. The ModellingRule indicates whether a child is Mandatory or Optional . It can also indicate cardinality. Note that
OPC-30060 – OPC UA for Tobacco Machine Communication

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30060 – OPC UA for Tobacco Machine Communication

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . Table 1 - Examples of DataTypes Notation DataType ValueRank ArrayDimensions Description 0:Int32 0:Int32
OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>

3.3.3.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>

3.3.4.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30100 – OPC UA for SERCOS Devices

4.3.1 Conventions for Node descriptions

that is not set "--" will be used. References NodeClass BrowseName DataType TypeDefinition ModellingRule ReferenceType name NodeClass of the Target Node . BrowseName of the target Node . If the Reference ... Attributes of the referenced Node , only applicable for Variables and Objects . Referenced ModellingRule of the referenced Object . Notes - Notes referencing footnotes of the table content. Attributes are defined by providing
OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture

3.4.1 Conventions for Node descriptions

that is not set "--" will be used. References NodeClass BrowseName DataType TypeDefinition ModellingRule ReferenceType name NodeClass of the Target Node . BrowseName of the target Node . If the Reference ... Attributes of the referenced Node , only applicable for Variables and Objects . Referenced ModellingRule of the referenced Object . Notes - Notes referencing footnotes of the table content. Attributes are defined by providing
OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture

5.2.1 POWERLINK Objects and their attributes

defines the ModellingRules Mandatory and Optional. Since OPC UA does provide an ModellingRule which can be mapped to Conditional of POWERLINK, the mapping is the following: Category M becomes ... ModellingRule Mandatory Category O becomes the ModellingRule Optional Category Cond becomes the ModellingRule Optional and requires a textual description at the objects definition about the condition that makes the object
OPC-30130 – OPC UA for Control & Communication System Profile(for Machine)

5.2.1.1 CsppMachineType ObjectType

CsppMachineType ObjectType Attribute Value BrowseName CsppMachineType IsAbstract True References NodeClass BrowseName DataType TypeDefinition ModellingRule Details Subtype of the DeviceType defined in OPC 10000-100 HasComponent Object 1:ParameterSet - BaseObjectType Mandatory ... HasComponent Object <CommIfSection> - FunctionalGroup Type MandatoryPlaceholder 5.2.1.3 ModellingRule of the ParameterSet Object is Optional in the source of the inheritance but that of the CsppMachineType ObjectType should
OPC-30140 – OPC UA for PROFINET

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30141 – OPC UA for PROFIenergy

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30141 – OPC UA for PROFIenergy

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30142 – OPC UA for PROFINET Remote IO

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30142 – OPC UA for PROFINET Remote IO

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>

3.5.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>

3.5.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives

3.5.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives

3.5.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30200 – OPC UA for Commercial Kitchen Equipment

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30200 – OPC UA for Commercial Kitchen Equipment

5.2.3.1 DeviceClass Property

Property The property DeviceClass of the DeviceType is overwritten in order to change the ModellingRule to Mandatory . The DeviceClass Strings used for this specification are defined in Table
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30250 – OPC Unified Architecture for DEXPI

4.2.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30260 – OPC UA for OPEN-SCS - Serialization Object Model: OPEN-SCS

3.4 OPC UA Notation

defines a rule that the BrowseName of instance declarations having an OptionalPlaceholder or MandatoryPlaceholder ModellingRule be enclosed in angle brackets (<>). Originally, this rule is defined ... description of a table. The BrowseName of a Node that has OptionalPlaceholder or MandatoryPlaceholder ModellingRule are described with angle brackets, which denotes that the name is not fixed. For example
OPC-30270 – OPC UA for Asset Administration Shell (AAS)

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30450-1 – OPC UA for Digital Product Passport - Part 1: Information Model

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30450-1 – OPC UA for Digital Product Passport - Part 1: Information Model

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Objects and Variables that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-34100 – OPC UA for Energy Consumption Management

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-34100 – OPC UA for Energy Consumption Management

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

3.4.1.1 Node Definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

11.2 MachineComponentsType ObjectType Definition

Conformance Units Machinery Find Components of Machines The < Component > Object has the ModellingRule OptionalPlaceholder and represents the identifiable components of a Machine . As any ObjectType can be used
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

12.2 MachineryItemState_StateMachineType

initial State is vendor-specific. Note: None of the States or Transitions have a ModellingRule , i.e., they are only provided in the TypeDefinition , not on the instance. The CurrentState Variable
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

13.2 MachineryOperationModeStateMachineType

initial State is vendor-specific. Note: None of the States or Transitions have a ModellingRule , i.e., they are only provided in the TypeDefinition , not on the instance. The CurrentState Variable
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40077 – OPC UA interfaces for plastics and rubber machinery - Data exchange between injection moulding machines and MES

17.2 Optional properties in CyclicJobInformationType

CyclicJobInformationType, as defined in OPC 40083, the Properties MouldId and NumCavities have the ModellingRule optional. When the CyclicJobInformationType is used for a OPC 40077 interface, these Properties become mandatory
OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions

3.2.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40100-1 – OPC UA for Machine Vision - Part 1: Control, configuration management, recipe management, result management

3.3.1 Conventions for Node descriptions

NodeId , i.e. the specified Node points with a HasTypeDefinitionReference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule ... ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRuleReference to point to the corresponding ModellingRuleObject . If the NodeId of a DataType is provided, the symbolic name
OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring

3.4.1.1 Node definitions

specified Node points to the corresponding Node, with a HasTypeDefinition Reference . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40210 – OPC UA for Geometric Measurement Systems

4.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40210 – OPC UA for Geometric Measurement Systems

4.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40223 – OPC UA for Pumps and Vacuum Pumps

3.3.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems

6.4 Identification

DeviceClass Property has its Value Attribute set to a mandatory specific value and its ModellingRule changed to mandatory. Table 9 shows for each CASPart what value shall
OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems

7.6 MCSType ObjectType Definition

provides Properties to identify the Main Control System . The optional Variable DeviceClass has its ModellingRule changed to mandatory and its Value Attribute set to a specific value. The optional FunctionalGroup
OPC-40301 – OPC UA for Flat Glass Processing

3.5.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40301 – OPC UA for Flat Glass Processing

3.5.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40444 – OPC UA for Textile Testing Devices

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40444 – OPC UA for Textile Testing Devices

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40502 – OPC UA for Computerized Numerical Control (CNC) Systems - for CNC Systems: OPC UA Information Model

3.3.1 Conventions for Node descriptions

that is not set "--" will be used. References NodeClass BrowseName DataType TypeDefinition ModellingRule ReferenceType name NodeClass of the Target Node . BrowseName of the target Node . If the Reference ... Attributes of the referenced Node , only applicable for Variables and Objects . Referenced ModellingRule of the referenced Object . Notes - Notes referencing footnotes of the table content. Attributes are defined by providing
OPC-40503-1 – OPC UA for Metal Forming - Part 1: General

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40503-1 – OPC UA for Metal Forming - Part 1: General

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40505 – OPC UA for Wireless Machine Tool Peripherals

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40505 – OPC UA for Wireless Machine Tool Peripherals

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40530 – OPC UA for Laser Systems

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40530 – OPC UA for Laser Systems

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40540 – OPC UA for Additive Manufacturing

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40540 – OPC UA for Additive Manufacturing

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40560 – OPC UA for Mining - General

3.2.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40560 – OPC UA for Mining - General

3.2.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40570 – OPC UA for Wire Harness Manufacturing

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40570 – OPC UA for Wire Harness Manufacturing

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40600 – OPC UA for Weihenstephan Standards

3.4.1 Conventions for Node descriptions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40700 – OPC UA for Surface Technology - General Types

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40700 – OPC UA for Surface Technology - General Types

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems

3.3.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems

3.3.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40719 – OPC UA for Plasma Surface Technology

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40719 – OPC UA for Plasma Surface Technology

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended
OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)

3.4.1.1 Node definitions

specified Node points with a HasTypeDefinition Reference to the corresponding Node . The ModellingRule of the referenced component is provided by specifying the symbolic name of the rule in the ModellingRule ... AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided, the symbolic name of the Node representing
OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)

3.4.2.2 BrowseNames

InstanceDeclarations of NodeClass Object and Variable that are placeholders ( OptionalPlaceholder and MandatoryPlaceholder ModellingRule ), the BrowseName and the DisplayName are enclosed in angle brackets (<>) as recommended