5.4.3.29 EndBound
The EndBound Aggregate defined in Table 77 returns the value and status at the EndTime for the interval by calculating the Simple Bounding Values for the interval (see 3.1.9).
The timestamp returned is always the start of the interval and Calculated bit is set.
| EndBound Aggregate Characteristics | ||
| Type | Calculated | |
| Data Type | Same as Source | |
| Use Bounds | Simple | |
| Timestamp | StartTime | |
| StatusCode Calculations | ||
|---|---|---|
| Calculation Method | Custom The status of the end bound. | |
| Partial | Set Sometimes If an interval is not a complete interval | |
| Calculated | Set Always | |
| Interpolated | Not Set | |
| Raw | Not Set | |
| Multi Value | Not Set | |
| StatusCode Common Special Cases | ||
|---|---|---|
| Before Start of Data | Bad_NoData | |
| After End of Data | Bad_NoData | |
| No Start Bound | Does not apply | |
| No End Bound | Bad_NoData | |
| Bound Bad | Same as bound | |
| Bound Uncertain | Same as bound | |