7.2.1 PowerlinkNMTStateEnumeration
This DataType is an enumeration that represents the NMT State. Its values are defined in Table 23. States with the prefix “NMT_XS” represent a state that is existing for the POWERLINK Controlled Node as well as for the POWERLINK Managing Node. For instance, the states NMT_MS_OPERATIONAL and NMT_CS_OPERATIONAL are both represented by the enumeration value NMT_XS_OPERATIONAL_253.
| Value | Description |
| NMT_GS_OFF_0 | |
| NMT_GS_INITIALISING_25 | first state after power-on of the POWERLINK Device |
| NMT_GS_RESET_APPLICATION_41 | set manufacturer-specific and standardised device profile area to their power-on values |
| NMT_GS_RESET_COMMUNICATION_57 | set communication profile area (except ERR_History_ADOM) to their power-on values |
| NMT_GS_RESET_CONFIGURATION_121 | generate the active device configuration |
| NMT_XS_NOT_ACTIVE_28 | a non-permanent state which allows a starting device to recognise the current network state |
| NMT_XS_PRE_OPERATIONAL_1_29 | the POWERLINK network operates in reduced cycle |
| NMT_XS_PRE_OPERATIONAL_2_93 | the POWERLINK network operates in isochronous operation, but the device is still in a configuration state |
| NMT_XS_READY_TO_OPERATE_109 | the device configuration is completed and the device is ready to switch over to NMT_XS_OPERATIONAL |
| NMT_XS_OPERATIONAL_253 | normal operating state of a POWERLINK Device |
| NMT_CS_STOPPED_77 | the device is largely passive, NMT_CS_STOPPED shall be used for controlled shutdown of a selected CN while the system is still running |
| NMT_XS_BASIC_ETHERNET_30 | Legacy Ethernet communication according to IEEE 802.3, no POWERLINK specific network traffic control |
Its representation in the AddressSpace is defined in Table 24.
| Attributes | Value |
| BrowseName | PowerlinkNMTStateEnumeration |
| Subtype of Enumeration defined in OPC 10000-5. | |