9.3.11 OpticalVerifierScanResult

This DataType is a structure that defines the results of a scan. Its composition is formally defined in Table 61.

Table 61 – OpticalVerifierScanResult Structure
Name Type Description Optional
OpticalVerifierScanResultStructureSubtype of OpticalScanResult defined in 9.3.10.

IsoGrade

String

This value contains the ISO grade, the aperture and the wavelength used.

Example content: "2.7/10/660"

With the '2.7' being the grade, the '10' being the measuring aperture that was used for the analysis and the '660' is the wavelength of light used to illuminate the code. If the grade is reported without aperture and wavelength, then it really is quite meaningless (a code measured with an '06' aperture can give a totally different result that one measured with a '20' aperture for instance).

False

RMin

Int16

The minimum reflection value in percent (from a dark bar).

Example: 6

False

SymbolContrast

Int16

The Symbol Contrast value (Rmax – Rmin) in percent.

Example: 41

False

ECMin

Int16

The minimum Edge Contrast value in percent.

Example: 31

False

Modulation

Int16

The modulation (ECmin / SC) value in percent.

Example: 76

False

Defects

Int16

The defects value in percent.

Example: 14

False

Decodability

Int16

The decodability value in percent.

Example: 87

False

Decode

Int16

The decode content value in percent.

Example: 100

False

PrintGain

Int16

The print gain value in percent (-4%).

Example: -4

False

Its representation in the AddressSpace is defined in Table 62.

Table 62 – OpticalVerifierScanResult Definition
Attribute Value
BrowseNameOpticalVerifierScanResult
IsAbstractFalse
References NodeClass BrowseName DataType TypeDefinition Other
Subtype of OpticalScanResult defined in 9.3.10.