6.5.3.1 Object RuntimeParameters

This FunctionalGroup is inherited from the AutoIdDeviceType and described in 6.1. Predefined runtime parameters for for this FunctionalGroup are defined in Table 15 and described below.

Parameter CodeTypesRWData allows the user to determine the supported code types and to select the configured CodeTypes for the diagnostics value RWData (defined in Error! Reference source not found.). This parameter is used to expose the list of supported CodeTypes. This list can contain the predefined values or vendor specific values. The Value of the Variable contains the currently selected types. The code type Strings are defined in 9.1.3.

Parameter TagTypes allows the user to determine the expected tags in a multi-type environment (e.g. ISO 14443 or ISO 15693). This parameter is used to expose the list of supported tag types. This list can contain the predefined values or vendor specific values. The Value of the Variable contains the currently selected types. The following Strings are defined by this specification.

ISO 14443

ISO 15693

ISO 18000-2

ISO 18000-3 Mode1

ISO 18000-3 Mode2

ISO 18000-3 Mode3

ISO 18000-4

ISO 18000-61

ISO 18000-62

ISO 18000-63

ISO 18000-64

EPC Class1 Gen2 V1

EPC Class1 Gen2 V2

Parameter RfPower is used to adjust radio transmission power, per antenna.

Parameter MinRssi is the lowest acceptable RSSI value (see also Strength field in RFIDSighting).

Parameter EnableAntennas determines the antennas that shall be used by the RfidDevice for its operation. The value is a binary selection of the antennas. Each bit represents one antenna, max. 32 antennas can be addressed.