OpPerfLogType Object Type – OPC UA for Mining - External Standards

7.9 OpPerfLogType Object Type

7.9.1 Overview

The OpPerfLogType ObjectType is based on the BaseObjectType and is intended to be used as AddIn. Its purpose is to accumulate the time of each operation mode during the reporting period. Its formal definition is given in Table 46.

7.9.2 OpPerfLogType Object Type Definition

Table 46 – OpPerfLogType ObjectType Definition

Attribute	Value
BrowseName	OpPerfLogType
IsAbstract	False

References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of BaseObjectType as defined in OPC 10000-3
0:HasProperty	Variable	0:DefaultInstanceBrowseName	0:QualifiedName	0:PropertyType
0:HasComponent	Variable	Mworking	Duration	0:BaseDataVariableType	M, RW
0:HasComponent	Variable	WaitProcess	Duration	0:BaseDataVariableType	M, RW
0:HasComponent	Variable	WaitOperator	Duration	0:BaseDataVariableType	M, RW
0:HasComponent	Variable	WaitRepair	Duration	0:BaseDataVariableType	M, RW
0:HasComponent	Variable	WaitSamples	Duration	0:BaseDataVariableType	M, RW
0:HasComponent	Variable	TurnedOff	Duration	0:BaseDataVariableType	M, RW

Conformance Units
IREDES OpPerfLogType

The component Variables of the OpPerfLogType have additional Attributes defined in Table 47.

Table 47 – OpPerfLogType Attribute Values for child Nodes

BrowsePath	Value Attribute	Description Attribute
0:DefaultInstanceBrowseName	OpPerfLog	The default BrowseName for instances of this type.

7.9.3 ObjectType Description

The description can be found in Table 48.

Table 48 – OpPerfLogType Attribute Values for Child Nodes

BrowsePath	Description Attribute
Mworking	Machine working.
WaitProcess	Machine waiting for other partners in the process or for process reasons not caused by the machine itself. This may be an (autonomous) machine waiting for access to a shared tramming zone or waiting for access to a dump shaft, a truck to become available etc. See “IREDES Drill Rig profile description” document.
WaitOperator	Time the machine waits for operator assistance during the reporting period. See “IREDES Drill Rig profile description” document.
WaitRepair	Waiting time for repair until the repair is finished and the machine manually is switched on again. See “IREDES Drill Rig profile description” document.
WaitSamples	Waiting time for external supplies like electric power, network connection for remote control (if not in local operation mode), water, material etc. See “IREDES Drill Rig profile description” document.
TurnedOff	Machine intentionally put in “OFF” state. This state is only counted if the machine is intentionally deactivated by an operator. Observe that a “switch off” while the machine is in “Wait Repair” mode will be counted as “wait repair” until the machine is switched on again.