ObjectType Description – OPC UA for Mining - External Standards

The description can be found in Table 48.

Table 48 – OpPerfLogType Attribute Values for Child Nodes

BrowsePath	Description Attribute
Mworking	Machine working.
WaitProcess	Machine waiting for other partners in the process or for process reasons not caused by the machine itself. This may be an (autonomous) machine waiting for access to a shared tramming zone or waiting for access to a dump shaft, a truck to become available etc. See “IREDES Drill Rig profile description” document.
WaitOperator	Time the machine waits for operator assistance during the reporting period. See “IREDES Drill Rig profile description” document.
WaitRepair	Waiting time for repair until the repair is finished and the machine manually is switched on again. See “IREDES Drill Rig profile description” document.
WaitSamples	Waiting time for external supplies like electric power, network connection for remote control (if not in local operation mode), water, material etc. See “IREDES Drill Rig profile description” document.
TurnedOff	Machine intentionally put in “OFF” state. This state is only counted if the machine is intentionally deactivated by an operator. Observe that a “switch off” while the machine is in “Wait Repair” mode will be counted as “wait repair” until the machine is switched on again.