The description can be found in Table 48.
Table 48 – OpPerfLogType Attribute Values for Child Nodes
|
BrowsePath |
Description Attribute |
|
Mworking |
Machine working. |
|
WaitProcess |
Machine waiting for other partners in the process or for process reasons not caused by the machine itself. This may be an (autonomous) machine waiting for access to a shared tramming zone or waiting for access to a dump shaft, a truck to become available etc. See “IREDES Drill Rig profile description” document. |
|
WaitOperator |
Time the machine waits for operator assistance during the reporting period. See “IREDES Drill Rig profile description” document. |
|
WaitRepair |
Waiting time for repair until the repair is finished and the machine manually is switched on again. See “IREDES Drill Rig profile description” document. |
|
WaitSamples |
Waiting time for external supplies like electric power, network connection for remote control (if not in local operation mode), water, material etc. See “IREDES Drill Rig profile description” document. |
|
TurnedOff |
Machine intentionally put in “OFF” state. This state is only counted if the machine is intentionally deactivated by an operator. Observe that a “switch off” while the machine is in “Wait Repair” mode will be counted as “wait repair” until the machine is switched on again. |