11.4 MeasurementReasonEnum
This enumeration MeasurementReasonEnum indicates the reason of a measurement. The enumeration is defined in Table 48.
| Name | Value | Description |
| ContinuousMeasurements | 0 | Series measurement. Default inspection |
| SpecialMeasurement | 1 | Other kind of measurements apart from series production |
| AuditMeasurement | 2 | capability and audit inspections |
| MinMastering | 3 | Zeroing / sensitivity check with Min Master |
| MedMastering | 4 | Zeroing / calibration |
| MaxMastering | 5 | Zeroing / sensitivity check with Max Master |
The MeasurementReasonEnum representation in the AddressSpace is defined in Table 49.
| Attribute | Value | |||||
| BrowseName | MeasurementReasonEnum | |||||
| IsAbstract | False | |||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | |
| Subtype of the Enumeration type defined in OPC 10000-5 | ||||||
| 0:HasProperty | Variable | 0:EnumStrings | 0:LocalizedText [] | 0:PropertyType | ||
| Conformance Units | ||||||
|---|---|---|---|---|---|---|
| GMS GMSJobType |