PumpControlMode – OPC UA interfaces for plastics and rubber machinery – Peripheral devices

10.19 PumpControlMode

Description:

Defines to which setpoint or function the pump is controlled. The TypeDefinition is MultiStateValueDiscreteType, so the Properties EnumValues and ValueAsText must be filled with the supported values out of Table 9.

Table 9 – Values for PumpControlMode

EnumValue	ValueAsText	Description
0	NORMAL	Normal Operation: fixed pump rotational speed
1	AUTO	Automatic adjustment of the pump rotational speed
2	SPEED	Speed controlled: the pump is controlled according to the specified nominal value PumpSpeed
3	FLOW	Flow rate controlled: the pump is controlled according to the specified nominal value FlowRate
4	TEMP_DIFF	Temperature difference controlled: the pump is controlled according to the specified nominal value TemperatureDifference
5	PRESS_DIFF	Pressure difference controlled: the pump is controlled according to the specified nominal value PressureDifference
6	BOOST	Boost mode: the pump is operated at the maximum possible rotational pump speed