8.2.2 IServoDriveAxis Interface
The IServoDriveAxis InterfaceType contains the basis states and information for a PTS positioning or servo drive axis type. This InterfaceType shall not be used if the axis is only operating as a spindle or variable speed drive without any positioning functionality. In case of a spindle with positioning functionality, which is currently operating in variable speed mode, the access to Variables of the interface related to the positioning mode, shall return the BAD StatusCode in this case.
| Attribute | Value | ||||
| BrowseName | IServoDriveAxis | ||||
| IsAbstract | True | ||||
| References | Node Class | BrowseName | DataType | TypeDefinition | Other |
|---|---|---|---|---|---|
| Subtype of the IDriveAxis InterfaceType. | |||||
| 0:HasComponent | Variable | HomingState | 0:UInt16 | 0:MultiStateValueDiscreteType | O, RO |
| 0:HasComponent | Variable | PositionActualValue | 0:Double | 0:BaseAnalogType | O, RO |
| 0:HasComponent | Variable | PositionFollowingError | 0:Float | 0:BaseAnalogType | O, RO |
| 0:HasComponent | Variable | PositionOffset | 0:Float | 0:BaseAnalogType | O, RO |
| Conformance Units | |||||
|---|---|---|---|---|---|
The PositionOffset Variable contains the home position shift for adjustment of axis mechanical zero (see HomingPointOffset Variable in the Homing Folder also).
For a description of the other Variables see Table 54.