10 OPC UA VariableTypes
10.1 PtTemperatureVariableType
The PtTemperatureVariableType contains a temperature value. It is formally defined in Table 68.
| Attribute | Value | ||||
| BrowseName | PtTemperatureVariableType | ||||
| IsAbstract | False | ||||
| ValueRank | -1 (-1 = Scalar) | ||||
| DataType | 0:Float | ||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other |
|---|---|---|---|---|---|
| Subtype of the 0:AnalogUnitType defined in OPC 10000-8. | |||||
| HasProperty | Variable | WarningThreshold | 0:Float | 0:PropertyType | O,RO |
| HasProperty | Variable | FaultThreshold | 0:Float | 0:PropertyType | O,RO |
| Conformance Units | |||||
|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
The Value of the Variable contains a temperature value provided by the Server. The Server might provide the optional InstrumentRange and EURange Properties of the 0:AnalogUnitType the PtTemperatureVariableType is derived from.
The WarningThreshold Property contains a temperature threshold causing a diagnosis system warning entry if the temperature value exceeds this threshold.
The FaultThreshold Property contains a temperature threshold causing a diagnosis system error entry if the temperature value exceeds this threshold.
The engineering unit used for the Value of these two Properties shall be equal to the engineering unit used for the Value of the PtTemperatureVariableType Variable and indicated by the EngineeringUnits Property.
10.2 PtVibrationMeasurementVariableType
The PtVibrationMeasurementVariableType contains a standard vibration measurement value.
| Attribute | Value | |||||
| BrowseName | PtVibrationMeasurementVariableType | |||||
| IsAbstract | False | |||||
| ValueRank | -1 (-1 = Scalar) | |||||
| DataType | 0:Float | |||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | |
|---|---|---|---|---|---|---|
| Subtype of the 0:AnalogUnitType defined in OPC 10000-8. | ||||||
| HasProperty | Variable | TimeConstant | Float | 0:PropertyType | O, RO | |
| Conformance Units | ||||||
|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
The TimeConstant Property contains the time constant required and shall be provided if needed for comparability of calculated time series. The engineering unit used shall be seconds. It is assumed that the Variable Value is calculated out of the measurement values sampled in the time interval specified by the TimeConstant Property. For details of calculations refer to DIN ISO 20816.
10.3 PtMaintenanceStatusVariableType
The PtMaintenanceStatusVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the maintenance status of Powertrain Objects and their components. It is formally defined in Table 70.
| Attribute | Value | ||||||
| BrowseName | PtMaintenanceStatusVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "GREEN", "Description": "No Maintenance required" }, { "Value":1, "DisplayName": "YELLOW", "Description": "Maintenance demanded" }, { "Value":2, "DisplayName": "RED", "Description": "Maintenance required" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.4 PtControlPriorityVariableType
The PtControlPriorityVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the entity controlling the Powertrain Object. It is formally defined in Table 72.
| Attribute | Value | |||||
| BrowseName | PtControlPriorityVariableType | |||||
| IsAbstract | False | |||||
| ValueRank | -1 (-1 = Scalar) | |||||
| DataType | 0:UInt16 | |||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | |
|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | ||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | |
| Conformance Units | ||||||
|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "NONE", "Description": "No control priority" }, { "Value":1, "DisplayName": "REMOTE_CONTROL", "Description": "Control is remote" }, { "Value":2, "DisplayName": "REMOTE_PRIORITY", "Description": "Priority is remote" }, { "Value":3, "DisplayName": "LOCAL_CONTROL", "Description": "Control is local" }, { "Value":4, "DisplayName": "LOCAL_OPERATOR", "Description": "Local operator has control" }, { "Value":5, "DisplayName": "SETUP_TOOL_CONTROL", "Description": "Setup tool has control" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.5 PtShaftTurningDirectionVariableType
The PtShaftTurningDirectionVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the turning direction of shafts. It is formally defined in Table 73.
| Attribute | Value | ||||||
| BrowseName | PtShaftTurningDirectionVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "CLOCKWISE", "Description": "Gear shaft is turning clockwise (CW)" }, { "Value":1, "DisplayName": "COUNTERCLOCKWISE", "Description": "Gear shaft is turning counterclockwise (CCW)" }, { "Value":2, "DisplayName": "STOPPED", "Description": "Gear shaft is stopped" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.6 PtBrakeStateVariableType
The PtBrakeStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of brakes. It is formally defined in Table 76.
| Attribute | Value | ||||||
| BrowseName | PtBrakeStateVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "NO_BRAKE", "Description": "No brake" }, { "Value":1, "DisplayName": "OPEN_BRAKE", "Description": "Brake is open and has no effect" }, { "Value":2, "DisplayName": "MECHANIC_BRAKE_APPLIED", "Description": "The mechanic brake is active" }, { "Value":3, "DisplayName": "DC_BRAKE_APPLIED", "Description": "The DC brake is active" }, { "Value":4, "DisplayName": "ROTOR_SHORT_APPLIED", "Description": "Rotor short circuit is active" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.7 PtGearStateVariableType
The PtGearStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of gears. It is formally defined in Table 78.
| Attribute | Value | ||||||
| BrowseName | PtGearStateVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "IDLE", "Description": "No gear" }, { "Value":1, "DisplayName": "HIGH_GEAR", "Description": "High gear" }, { "Value":2, "DisplayName": "LOW_GEAR", "Description": "Low gear" }, { "Value":3, "DisplayName": "FIRST_GEAR", "Description": "First gear" }, { "Value":4, "DisplayName": "SECOND_GEAR", "Description": "Second gear" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range. Vendors might extend the value range by appending "THIRD_GEAR", "FOURTH_GEAR" to the EnumValues array.
10.8 PtHomingDirectionVariableType
The PtHomingDirectionVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the direction of the homing function. It is formally defined in Table 80.
| Attribute | Value | ||||||
| BrowseName | PtHomingDirectionVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Axis Properties |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "POSITIVE", "Description": "Positive homing direction" }, { "Value":1, "DisplayName": "NEGATIVE", "Description": "Negative homing direction" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.9 PtHomingModeVariableType
The PtHomingModeVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the mode of the homing function. It is formally defined in Table 82.
| Attribute | Value | ||||||
| BrowseName | PtHomingModeVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Axis Properties |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "ABSOLUTE", "Description": "" }, { "Value":1, "DisplayName": "REF_MARK", "Description": "" }, { "Value":2, "DisplayName": "DIST_CODE", "Description": "" }, { "Value":3, "DisplayName": "FLY", "Description": "" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.10 PtHomingStateVariableType
The PtHomingStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the mode of the homing function. It is formally defined in Table 84.
| Attribute | Value | ||||||
| BrowseName | PtHomingStateVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "NOT_REFERENCED", "Description": "" }, { "Value":1, "DisplayName": "REFERENCED", "Description": "" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.11 PtEncoderChannelSignalTypeVariableType
The PtEncoderChannelSignalTypeVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the signal type of the encoder channel. It is formally defined in Table 86.
| Attribute | Value | ||||||
| BrowseName | PtEncoderChannelSignalTypeVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Encoder Channel |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "OTHER", "Description": "Other encoder protocol" }, { "Value":1, "DisplayName": "BISS_C", "Description": "BiSS interface continuous mode" }, { "Value":2, "DisplayName": "ENDAT2.1", "Description": "EnDat (Encoder Data), operating mode 2.1" }, { "Value":3, "DisplayName": "ENDAT2.2", "Description": "EnDat (Encoder Data), operating mode 2.2" }, { "Value":4, "DisplayName": "HIPERFACE", "Description": "Hiperface" }, { "Value":5, "DisplayName": "HIPERFACE_DSL", "Description": "Hiperface DSL (Digital Servo Link)" }, { "Value":6, "DisplayName": "SSI_BINARY", "Description": "Binary synchronous serial output (SSI)" }, { "Value":7, "DisplayName": "SSI_GRAY_CODE", "Description": "Gray code synchronous serial output (SSI)" }, { "Value":8, "DisplayName": "SINCOS_1VSS", "Description": "SinCos, 1 Vss output level" }, { "Value":9, "DisplayName": "SCS_OPEN_LINK", "Description": "Single cable solution (SCS open link)" }, { "Value":10, "DisplayName": "DRIVECLIQ", "Description": "DRIVE-CLiQ" }, { "Value":11, "DisplayName": "BISS_LINE", "Description": "BiSS Line" }, { "Value":12, "DisplayName": "FANUC_37BIT_SERIAL_COMM", "Description": "Fanuc 37-bit serial interface" }, { "Value":13, "DisplayName": "MITSUBISHI_40BIT_SERIAL_COMM", "Description": "Mitsubishi 40-bit serial interface" }, { "Value":14, "DisplayName": "OMRON/PANASONIC_48BIT_SERIAL_COMM", "Description": "OMRON/Panasonic 48-bit serial interface" }, { "Value":15, "DisplayName": "YASKAWA_36BIT_SERIAL_COMM", "Description": "Yaskawa 36-bit serial interface" }, { "Value":16, "DisplayName": "RS422_5V_TTL", "Description": "RS422 (TTL - Transistor Transistor Logic), 5 V signal level" }, { "Value":17, "DisplayName": "RS422_5..30V", "Description": "RS422 signal level depend on entry level 5 V to 30 V" }, { "Value":18, "DisplayName": "SINCOS_1VPP", "Description": "SinCos, 1 Vss output level" }, { "Value":19, "DisplayName": "RESOLVER", "Description": "Resolver signal" }, { "Value":20, "DisplayName": "HTL_PUSH-PULL", "Description": "High Threshold Logic (HTL), typically voltage ranges from 5 to 30 VDC" }, { "Value":21, "DisplayName": "RS485", "Description": "RS-485, signal is transmitted over a Sig+ line and a Sig- line" }, { "Value":22, "DisplayName": "RS485_SINCOS", "Description": "RS-485, Sin-/Cos-Signal" }, { "Value":23, "DisplayName": "RS485_HTL", "Description": "RS-485, High Threshold Logic (HTL) signal" }, { "Value":24, "DisplayName": "RS485_TTL", "Description": "RS-485, Transistor Transistor Logic (TTL) signal" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.12 PtEncoderChannelStateVariableType
The PtEncoderChannelStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of the encoder channel. It is formally defined in Table 88.
| Attribute | Value | ||||||
| BrowseName | PtEncoderChannelStateVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Encoder Channel |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "NORMAL_OPERATION", "Description": "The position feedback interface operates normally" }, { "Value":1, "DisplayName": "ERROR_ACKNOWLEDGEMENT", "Description": "Error acknowledgement is being processed" }, { "Value":2, "DisplayName": "ERROR", "Description": "There is an error present" }, { "Value":3, "DisplayName": "REFERENCE_VALUE_TRANSMISSION", "Description": "The reference value is transmitted to the controller" }, { "Value":4, "DisplayName": "WAIT_FOR_REFERENCE_VALUE", "Description": "The reference mark pulse is expected" }, { "Value":5, "DisplayName": "SET_SHIFT_HOME_POSITION", "Description": "Position actual value is set or shifted" }, { "Value":6, "DisplayName": "WAIT_FOR_MEASURED_VALUE", "Description": "Measurement task active, waiting for measurement values" }, { "Value":7, "DisplayName": "MEASURED_VALUE_TRANSMISSION", "Description": "The requested measured value is transmitted to the controller" }, { "Value":8, "DisplayName": "PARKING", "Description": "The position feedback interface is inactive and does not deliver a valid position value" }, { "Value":9, "DisplayName": "ERROR_INVALID_ACTUAL_VALUE", "Description": "There is an error present and position value is signalled invalid" }, { "Value":10, "DisplayName": "ERROR_ACKNOWLEDGEMENT_INVALID_ACTUAL_VALUE", "Description": "Error acknowledgement is being processed and position is signalled invalid" }, { "Value":11, "DisplayName": "REFERENCE_VALUE_AVAILABLE", "Description": "Reference latch was triggered and latched reference value is available" }, { "Value":12, "DisplayName": "MEASURED_VALUE_AVAILABLE", "Description": "Measurement latch was triggered and latched measurement value is available" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.
10.13 PtLatchStatusVariableType
The PtLatchStatusVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the mode of the homing function. It is formally defined in Table 90.
| Attribute | Value | ||||||
| BrowseName | PtLatchStatusVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Actual and Command Values |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "INACTIVE", "Description": "Latch function is deactivated" }, { "Value":1, "DisplayName": "ACTIVE_WAITING", "Description": "Latch function is active and latch is armed. Latch is waiting for trigger" }, { "Value":2, "DisplayName": "ACTIVE_LATCHED", "Description": "Latch function is active and latch has been triggered. Latched value is available in LatchValue Variable" }, { "Value":3, "DisplayName": "CONTINOUS_MEASUREMENT", "Description": "Latch function is active. Latch is armed automatically for continuous measurement process. Last latched value is always available in LatchValue Variable" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.