10.12 PtEncoderChannelStateVariableType
The PtEncoderChannelStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of the encoder channel. It is formally defined in Table 88.
| Attribute | Value | ||||||
| BrowseName | PtEncoderChannelStateVariableType | ||||||
| IsAbstract | False | ||||||
| ValueRank | -1 (-1 = Scalar) | ||||||
| DataType | 0:UInt16 | ||||||
| References | NodeClass | BrowseName | DataType | TypeDefinition | Other | ||
|---|---|---|---|---|---|---|---|
| Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8. | |||||||
| HasProperty | Variable | EnumValues | EnumValueType[] | PropertyType | M | ||
| Conformance Units | |||||||
|---|---|---|---|---|---|---|---|
| Powertrain Encoder Channel |
| BrowsePath | Value Attribute |
| 0:EnumValues | [ { "Value":0, "DisplayName": "NORMAL_OPERATION", "Description": "The position feedback interface operates normally" }, { "Value":1, "DisplayName": "ERROR_ACKNOWLEDGEMENT", "Description": "Error acknowledgement is being processed" }, { "Value":2, "DisplayName": "ERROR", "Description": "There is an error present" }, { "Value":3, "DisplayName": "REFERENCE_VALUE_TRANSMISSION", "Description": "The reference value is transmitted to the controller" }, { "Value":4, "DisplayName": "WAIT_FOR_REFERENCE_VALUE", "Description": "The reference mark pulse is expected" }, { "Value":5, "DisplayName": "SET_SHIFT_HOME_POSITION", "Description": "Position actual value is set or shifted" }, { "Value":6, "DisplayName": "WAIT_FOR_MEASURED_VALUE", "Description": "Measurement task active, waiting for measurement values" }, { "Value":7, "DisplayName": "MEASURED_VALUE_TRANSMISSION", "Description": "The requested measured value is transmitted to the controller" }, { "Value":8, "DisplayName": "PARKING", "Description": "The position feedback interface is inactive and does not deliver a valid position value" }, { "Value":9, "DisplayName": "ERROR_INVALID_ACTUAL_VALUE", "Description": "There is an error present and position value is signalled invalid" }, { "Value":10, "DisplayName": "ERROR_ACKNOWLEDGEMENT_INVALID_ACTUAL_VALUE", "Description": "Error acknowledgement is being processed and position is signalled invalid" }, { "Value":11, "DisplayName": "REFERENCE_VALUE_AVAILABLE", "Description": "Reference latch was triggered and latched reference value is available" }, { "Value":12, "DisplayName": "MEASURED_VALUE_AVAILABLE", "Description": "Measurement latch was triggered and latched measurement value is available" } ] |
The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.