10.6 PtBrakeStateVariableType

The PtBrakeStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of brakes. It is formally defined in Table 76.

Table 76 - PtBrakeStateVariableType definition
AttributeValue
BrowseNamePtBrakeStateVariableType
IsAbstractFalse
ValueRank-1 (-1 = Scalar)
DataType0:UInt16
ReferencesNodeClassBrowseNameDataTypeTypeDefinitionOther
Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8.
HasPropertyVariableEnumValuesEnumValueType[]PropertyTypeM
Conformance Units
Powertrain Actual and Command Values
Table 77 - PtBrakeStateVariableType Attribute values for child Nodes
BrowsePathValue Attribute
0:EnumValues

[

{ "Value":0,

"DisplayName": "NO_BRAKE",

"Description": "No brake"

},

{ "Value":1,

"DisplayName": "OPEN_BRAKE",

"Description": "Brake is open and has no effect"

},

{ "Value":2,

"DisplayName": "MECHANIC_BRAKE_APPLIED",

"Description": "The mechanic brake is active"

},

{ "Value":3,

"DisplayName": "DC_BRAKE_APPLIED",

"Description": "The DC brake is active"

},

{ "Value":4,

"DisplayName": "ROTOR_SHORT_APPLIED",

"Description": "Rotor short circuit is active"

}

]

The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range.