7.1 PtFunctionType definition

The PtFunctionType specifies the properties which are common for all OPC UA for Powertrain - Functional Model ObjectTypes.

Table 15 - PtFunctionType definition
AttributeValue
BrowseNamePtFunctionType
IsAbstractTrue
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the 0:BaseObjectType defined in OPC 10000-5.
0:HasPropertyVariableApplicationTag0:String0:PropertyTypeO, RO
0:HasComponentMethodSetApplicationTagO
0:HasComponentObjectLock2:LockingServicesTypeO
0:HasComponentObjectFieldbusSignals0:FolderTypeO
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectMaintenance0:FolderTypeM
0:HasComponentObjectLogbookPtLogbookTypeO
0:GeneratesEventObjectTypePtLogbookEventType
0:HasComponentObjectLogObject0:LogObjectTypeO
0:GeneratesEventObjectTypePtLogObjectEventType
Conformance Units
Powertrain Actual and Command Values
Powertrain Logbook Readable
Powertrain Logbook Events
Powertrain Fieldbus
Powertrain Encoder Channel
Powertrain LogObject
Powertrain LogObject Events

General Properties in Semantic sub-aspect

The ApplicationTag Variable contains information given by the overall application. The purpose is to provide additional semantic information about the represented Powertrain Objects role or labelling in the context of the specific overall application context (machine, site or plant). Therefore, plant operators and/or application engineers are responsible to set the content of the ApplicationTag with information used for site management, asset management or other administrative purposes, e.g. "Production Line <m>/Machine <n>/x-Axis".

Furthermore, information out of identification objects offered by field bus protocols may be used as content of the ApplicationTag Variable (e.g. in case of PROFINET, the I&M-1 record "tag-function" or the I&M-3 "descriptor" could be used). However, as a default, vendors could also generate the ApplicationTag string out of the device or field bus configuration data as initial content of the Variable (e.g. in case of PROFINET, the NameOfStation and Module/Axis number could be used).

The Client can change the Value of this Variable by invoking the SetApplicationTag Method.

Before invoking a Method of the PtFunctionType Object, Clients must gain exclusive write access ("lock" the PtFunctionType Object) using the Lock Object.

The Lock Object ensures exclusive Method call for one Client. The Client locks the PtFunctionType Object by invoking the InitLock Method of the Lock Object. The Client invokes ExitLock to release the lock.

Some components of the PtFunctionType have additional subcomponents which are defined in Table 16.

Table 16 - PtFunctionType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
FieldbusSignals0:HasComponentVariable<SignalName>0:Number0:BaseDataVariableTypeOP, RO
Monitoring0:HasComponentVariableControlPriority0:UInt16PtControlPriorityVariableTypeO, RO
Monitoring0:HasComponentVariableShaftTurningDirection0:UInt16PtShaftTurningDirectionVariableTypeO, RO
Monitoring0:HasComponentVariableDeviceTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentObject<VibrationSensor_x>PtVibrationSensorTypeOP
Applied from 2:IOperationCounterType Interface:
Maintenance0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance0:HasComponentObject<Motor_x>0:BaseObjectTypeOP
Maintenance0:HasComponentObject<Converter>0:BaseObjectTypeOP
Maintenance0:HasComponentObject<Gear_x>0:BaseObjectTypeOP
Maintenance0:HasComponentObject<Encoder_x>0:BaseObjectTypeOP
Maintenance0:HasComponentObject<Brake_x>0:BaseObjectTypeOP
Applied from 2:IOperationCounterType Interface:
Maintenance
<Motor_x>

0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Motor_x>

0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Motor_x>

0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance
<Converter>

0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Converter>

0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Converter>

0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance
<Gear_x>

0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Gear_x>

0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Gear_x>

0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance
<Encoder_x>

0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Encoder_x>

0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Encoder_x>

0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance
<Brake_x>

0:HasPropertyVariable2:PowerOnDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Brake_x>

0:HasPropertyVariable2:OperationDuration0:Duration0:PropertyTypeO, RO
Maintenance
<Brake_x>

0:HasPropertyVariable2:OperationCycleCounter0:UInteger0:PropertyTypeO, RO
Maintenance
<Motor_x>

0:HasComponentVariableThermalCapacityUtilization0:UInteger0:BaseDataVariableTypeO, RO
Maintenance
<Motor_x>

0:HasComponentVariablePeakUtilization0:UInteger0:BaseDataVariableTypeO, RO
Maintenance
<Motor_x>

0:HasComponentVariableRemainingUsefulLifetime0:Integer0:BaseDataVariableTypeO, RO
Maintenance
<Gear_x>

0:HasPropertyVariableOilRemainingUsefulLifetime0:Duration0:PropertyTypeO, RO
Maintenance
<Gear_x>

0:HasComponentVariableMaintenanceStatus0:UInt16PtMaintenanceStatusVariableTypeO, RO
Maintenance0:HasComponentVariableThermalCapacityUtilization0:UInteger0:BaseDataVariableTypeO, RO
Maintenance0:HasComponentVariablePeakUtilization0:UInteger0:BaseDataVariableTypeO, RO
Maintenance0:HasComponentVariableRemainingUsefulLifetime0:Integer0:BaseAnalogTypeO, RO
Maintenance0:HasComponentVariableGearOilRemainingUsefulLifetime0:Integer0:BaseAnalogTypeO, RO
Maintenance0:HasComponentVariableGearMaintenanceStatus0:UInt16PtMaintenanceStatusVariableTypeO, RO

SetApplicationTag Method

This Method sets the Value of the ApplicationTag Variable. The security constraints defined in chapter 0 apply.

Signature

	SetApplicationTag (
		[in] 0:String	 ApplicationTag
		);
	
ArgumentDescription
ApplicationTagString containing the desired content of the ApplicationTag Variable.

The Method Result Codes (defined in Call Service) are defined in Table 17.

Table 17 - Possible Method Result Codes
Result CodeDescription
GoodThe Method execution was successful.
Bad_UserAccessDeniedThe user has not the authorization to execute the Method.
Bad_InvalidArgumentThe Server is not able to apply the name. The ApplicationTag string may be too long or may contain invalid characters. The Server may also reject duplicates.
Bad_LockedThe PtFunctionType Object is locked by a different Client's Session.
Bad_RequiresLockThe PtFunctionType Object is not locked. Clients must lock the PtFunctionType Object before invoking a Method.
Bad_UnexpectedErrorThe Server is not able to execute the function because an unexpected error occurred. The Device might be temporarily unavailable or unreachable due to network failure.

Monitoring folder in Actual and Command Values sub-aspect

The Monitoring folder contains Variables common to all derived ObjectTypes. Derived ObjectTypes add additional type specific components to the Monitoring folder.

The specification of the Monitoring folder at the abstract root of the type hierarchy renders this folder mandatory for all derived ObjectTypes. The Variables specified by PtFunctionType are defined in Table 16 and are common for all derived ObjectTypes.

Maintenance folder in Maintenance sub-aspect

The Maintenance folder contains optional properties defined by the 2:IOperationCounterType Interface specified in [OPC 10000-100]. Figure 6 shows the motor related components of the Maintenance folder if the Drive has one motor. The PowerOnDuration, OperationDuration and OperationCycleCounter Properties are specified by the applied 2:IOperationCounterType Interface.

For a description of all Variables and Properties in the "Maintenance" folder see Table 54. The specification of the Maintenance folder at the abstract root of the type hierarchy renders this folder mandatory for all derived ObjectTypes. Derived ObjectTypes may add additional Variables to this folder.

If the Drive has more than one motor, and there are separate maintenance related variables for motors and converter, the 2:IOperationCounterType Interface shall be applied to the <Motor_x> or <Converter> placeholder Objects. The RemainingUsefulLifetime, ThermalCapacityUtilization and PeakUtilization Variables shall also be provided as components of the separate Objects representing the motors or converter in this case, as shown in Figure 7 for a dual motor scenario.

Figure 7 - IOperationCounterType Interface applied to placeholder Object

The same principle applies for the <Gear_x> placeholder objects. If the Drive has one gear, the gear-related Variables GearMaintenanceStatus and GearOilRemainingUsefulLifetime shall be provided as components of the Maintenance folder. If the Drive has more than one gear, the <Gear_x> placeholder Objects shall provide the MaintenanceStatus and OilRemainingUsefulLifetime Variables and the GearMaintenanceStatus and GearOilRemainingUsefulLifetime Variables shall be omitted.

If the Drive is equipped with more than one brake, the 2:IOperationCounterType Interface shall be applied to the individual <Brake_x> placeholder Objects. If the Drive is equipped with more than one encoder, this Interface shall be applied to the individual <Encoder_x> Objects.

Diagnosis sub-aspect

The Logbook Object provides access to the PtDriveAxisType Object's diagnosis system.

The Server might provide the Client with information about new incidents by sending PtLogbookEventType Events.

The 0:LogObject Object (defined in OPC 10000-26) can be provided to make the content of the diagnosis system represented by the Logbook Object available for all Clients which prefer to utilize the LogObject. The mapping from the LogEntryDataType structures provided by the Logbook Object to the LogObject's 0:LogRecord structures is specified in Table 94.

The Server might provide the Client with information about new entries in the LogObject by sending PtLogObjectType Events.

The Logbook Object essentially provides the Client with the means to obtain information about the diagnosis state of a PtFunctionType Object. The Logbook also makes the history of diagnosis relevant events available for Clients by recording timestamps for the event when the event first appears, when it is acknowledged and when it disappears. Since the capacity of the diagnosis buffer the Logbook represents is limited, acknowledged events may be deleted by the Server.

The 0:LogObject provides a standard way to collect diagnostic information and to make it available for Clients. This allows a standard Client unaware of the Logbook Object defined in this specification to access the diagnosis information of a Powertrain Object. It also offers more flexibility regarding the required local memory, since the 0:LogObject may send the diagnosis records to a remote Server allowing the local 0:LogObject to have only a small buffer of records. The 0:LogObject also allows the collection of diagnosis information in a system using OpenTelemetry (see OPC 10000-26 Annex C).

Figure 8 shows the structure of the "Diagnosis" sub-aspect in conjunction with the associated EventTypes. The PtLogbookEventType Events related to entries into the Logbook are generated by the parent PtFunctionType Object. The insertion of 0:LogRecords by the LogObject causes PtLogObjectEventType Events to be generated by the parent PtFunctionType Object as well. The parent PtFunctionType Object is the SourceNode of the Events.

Figure 8 - Relationship of diagnosis Objects and diagnosis Events

7.1.1 PtDriveAxisType definition

The PtDriveAxisType ObjectType specifies the properties which are common for OPC UA for Powertrain - Functional Model Axis Type Drive Object ObjectTypes. The general characteristic for the PtDriveAxisType is that it contains an actuator.

The PtDriveAxisType is an abstract ObjectType representing Powertrain Drive Axis Objects.

Table 18 - PtDriveAxisType definition
AttributeValue
BrowseNamePtDriveAxisType
IsAbstractTrue
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtFunctionType.
0:HasComponentVariableAxisType0:UInt160:MultiStateValueDiscreteTypeM, RO
0:HasComponentObjectLimitSupervision0:FolderTypeO
0:HasComponentObjectCharacteristicsConverterPtCharacteristicsConverterTypeO
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLogbookPtLogbookTypeM
0:HasComponentObjectSafetyPtSafetyTypeO
0:HasComponentObjectVelocityProfile0:FolderTypeO
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectMaintenance0:FolderTypeM
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Logbook Readable
Powertrain Safety

Some components of the PtDriveAxisType have additional subcomponents which are defined in Table 19. For detailed descriptions of these Variables see Table 54.

Table 19 - PtDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableAxisState0:UInt160:MultiStateValueDiscreteTypeM, RO
Monitoring0:HasComponentVariableControlPriority0:UInt16PtControlPriorityVariableTypeM, RO
Monitoring0:HasComponentVariableControlMode0:UInt160:MultiStateValueDiscreteTypeO, RO
Monitoring0:HasComponentVariableFrequencySetpoint0:Float0:AnalogUnitTypeO, RO
Applied from IMonitoringElectric Interface (for electric drives only):
Monitoring0:HasComponentVariableBleederTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentVariableConverterOutputFrequency0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputVoltage0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputVoltageMagnetization0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputVoltageTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputCosPhi0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputCurrent0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputCurrentMagnetization0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputCurrentTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterOutputPower0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableConverterTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentVariableDcBusVoltage0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableLineInputPower0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring

0:HasComponent

VariableMotorTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentVariableBrakeState0:UInt16PtBrakeStateVariableTypeO, RO
Monitoring0:HasComponentVariableAxisTorqueForce0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAxisOutputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearInputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearInputTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearOutputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearOutputTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
Monitoring0:HasComponentVariableGearTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentVariableGearState0:UInt16PtGearStateVariableTypeO, RO
Monitoring0:HasComponentVariableGearOutputShaftTurningDirection0:UInt16PtShaftTurningDirectionVariableTypeO, RO
Monitoring0:HasComponentVariableGearInputShaftTurningDirection0:UInt16PtShaftTurningDirectionVariableTypeO, RO
Maintenance0:HasComponentVariableGearBacklash0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorPowerRated0:Float0:AnalogUnitTypeM, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorSpeedRated0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorTorqueRated0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorForceRated0:Float0:AnalogUnitTypeO, RO
Applied from ICharacteristicsMotorAndControlElectric Interface (for electric drives only):
CharacteristicsMotorAndControl0:HasComponentVariableMotorMaxCurrent0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasPropertyVariableMotorUfRatio0:Float0:PropertyTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorRunUpVoltage0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorDcBrakingCurrent0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableDcBrakingTime0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorThermalLoadLimitConfigured0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorPeakCurrentConfigured0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodCurrentControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableFeedbackMode0:UInt160:MultiStateValueDiscreteTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableSpeedMaxConfigured0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTorqueMaxConfigured0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableMotorType0:UInt160:MultiStateValueDiscreteTypeM, RO
CharacteristicsMotorAndControl0:HasComponentVariablePositionFollowingErrorLimit0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableVelocityFollowingErrorLimit0:Float0:AnalogUnitTypeO, RO
Applied from ILimitSupervisionElectric Interface (for electric drives only):
LimitSupervision0:HasComponentVariableMotorCurrentLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableMotorCurrentLimitHigh0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableJogSpeed10:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableJogSpeed20:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableNominalSpeed0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampDownTime0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableQuickStopVelocityRampDownTime0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampDeceleration0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableQuickStopVelocityRampDeceleration0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableMinimumVelocity0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableMaximumVelocity0:Float0:AnalogUnitTypeO, RO

The child Nodes of the PtDriveAxisType have additional Attribute values defined in Table 20.

Table 20 - PtDriveAxisType Attribute values for child Nodes
BrowsePathValue Attribute
AxisType
0:EnumValues

[

{ "Value":0,

"DisplayName": "LINEAR",

"Description": "Axis with linear movement"

},

{ "Value":1,

"DisplayName": "ROTATORY",

"Description": "Axis with rotatory movement"

},

{ "Value":2,

"DisplayName": "ROTATORY_MODULO",

"Description": "Single turn rotatory axis with modulo correction"

},

{ "Value":3,

"DisplayName": "SPINDLE",

"Description": "Axis with spindle properties"

},

{ "Value":4,

"DisplayName": "VIRTUAL_AXIS_LINEAR",

"Description": "Virtual axis with linear movement"

},

{ "Value":5,

"DisplayName": "VIRTUAL_AXIS_ROTARY",

"Description": "Virtual axis with rotatory movement"

}

]

Monitoring
AxisState
0:EnumValues

[

{ "Value":0,

"DisplayName": "SWITCHING_ON_INHIBITED",

"Description": "Switching on inhibited"

},

{ "Value":1,

"DisplayName": "READY_FOR_SWITCHING_ON",

"Description": "Ready for switching on"

},

{ "Value":2,

"DisplayName": "SWITCHED_ON",

"Description": "Switched on"

},

{ "Value":3,

"DisplayName": "OPERATION",

"Description": "In operation"

},

{ "Value":4,

"DisplayName": "RAMP_STOP",

"Description": "Controlled stop by ramp function"

},

{ "Value":5,

"DisplayName": "QUICK_STOP",

"Description": "Controlled stop with maximum deceleration"

},

{ "Value":6,

"DisplayName": "POS_BASIC_STATE",

"Description": "Positioning mode basic state"

},

{ "Value":7,

"DisplayName": "POS_JOGGING",

"Description": "Positioning mode jogging"

},

{ "Value":8,

"DisplayName": "POS_BRAKING_WITH_RAMP",

"Description": "Positioning mode braking with ramp function"

},

{ "Value":9,

"DisplayName": "POS_HOMING_PROCEDURE",

"Description": "Positioning mode homing"

},

{ "Value":10,

"DisplayName": "POS_TRAVERSING_TASK_ACTIVE",

"Description": "Positioning mode traversing task active"

},

{ "Value":11,

"DisplayName": "POS_INTERMEDIATE_STOP_STOPPED",

"Description": "Positioning mode stopped in intermediate stop"

},

{ "Value":12,

"DisplayName": "POS_INTERMEDIATE_STOP_BRAKING",

"Description": "Positioning mode breaking in intermediate stop"

},

{ "Value":13,

"DisplayName": "PARKED",

"Description": "Parked"

},

{ "Value":14,

"DisplayName": "SPINDLE_STOPPED",

"Description": "Spindle stopped"

},

{ "Value":15,

"DisplayName": "SPINDLE_ACCELERATING",

"Description": "Spindle is accelerating"

},

{ "Value":16,

"DisplayName": "SPINDLE_DECELERATING",

"Description": "Spindle is decelerating"

},

{ "Value":17,

"DisplayName": "SPINDLE_IN_TARGET_AREA",

"Description": "Spindle is in target area"

}

]

Monitoring
ControlMode
0:EnumValues

[

{ "Value":0,

"DisplayName": "TORQUE_CONTROL",

"Description": "Torque control"

},

{ "Value":1,

"DisplayName": "TORQUE_CONTROL_SENSORLESS",

"Description": "Torque control sensorless"

},

{ "Value":2,

"DisplayName": "FORCE_CONTROL",

"Description": "Force control"

},

{ "Value":3,

"DisplayName": "FORCE_CONTROL_SENSORLESS",

"Description": "Force control sensorless"

},

{ "Value":4,

"DisplayName": "SPEED_CONTROL",

"Description": "Speed control"

},

{ "Value":5,

"DisplayName": "SPEED_CONTROL_SENSORLESS",

"Description": "Speed control sensorless"

},

{ "Value":6,

"DisplayName": "SPEED_CONTROL_DSC",

"Description": "Speed control with dynamic stiffness control"

},

{ "Value":7,

"DisplayName": "POSITION_CONTROL",

"Description": "Position control"

},

{ "Value":8,

"DisplayName": "POSITION_CONTROL_SENSORLESS",

"Description": "Position control sensorless"

},

{ "Value":9,

"DisplayName": "POSITIONING_CONTROL",

"Description": "Positioning control"

},

{ "Value":10,

"DisplayName": "UF_CONTROL",

"Description": "U/F control"

},

{ "Value":11,

"DisplayName": "VECTOR_CONTROL",

"Description": "Vector control"

},

{ "Value":12,

"DisplayName": "VECTOR_CONTROL_SENSORLESS",

"Description": "Vector control sensorless"

}

]

CharacteristicsMotorAndControl
FeedbackMode
0:EnumValues

[

{ "Value":0,

"DisplayName": "FEEDBACK_MOTOR",

"Description": "Feedback with motor encoder"

},

{ "Value":1,

"DisplayName": "FEEDBACK_DIRECT",

"Description": "Feedback with direct encoder"

},

{ "Value":2,

"DisplayName": "FEEDBACK_MOTOR_AND_DIRECT",

"Description": "Feedback with motor and direct encoder"

},

{ "Value":3,

"DisplayName": "FEEDBACK_SENSOR_1",

"Description": "Feedback with sensor 1"

},

{ "Value":4,

"DisplayName": "FEEDBACK_SENSOR_2",

"Description": "Feedback with sensor 2"

},

{ "Value":5,

"DisplayName": "FEEDBACK_SENSOR_3",

"Description": "Feedback with sensor 3"

},

{ "Value":6,

"DisplayName": "SENSORLESS",

"Description": "Feedback without sensor"

}

]

CharacteristicsMotorAndControl
MotorType
0:EnumValues

[

{ "Value":0,

"DisplayName": "ASYNCHRONOUS",

"Description": "Induction motor"

},

{ "Value":1,

"DisplayName": "PM_AC_SYNCHRONOUS",

"Description": "Synchronous motor"

},

{ "Value":2,

"DisplayName": "PM_AC_SYNCHRONOUS_IRONLESS",

"Description": "Synchronous ironless motor"

},

{ "Value":3,

"DisplayName": "DC_BRUSHLESS",

"Description": "Brushless DC motor"

},

{ "Value":4,

"DisplayName": "DC_BRUSHED",

"Description": "DC motor"

},

{ "Value":5,

"DisplayName": "PM_STEPPER",

"Description": "Stepper motor"

},

{ "Value":6,

"DisplayName": "HYBRID_STEPPER",

"Description": "Hybrid stepper motor"

},

{ "Value":7,

"DisplayName": "SYNC_RELUCTANCE",

"Description": "Synchronous reluctance motor"

}

]

Some values represented as enumerations in the Monitoring and CharacteristicsMotorAndControl folders are modelled as 0:MultiStateValueDiscreteType Variables. The content of the EnumValues lookup table Property is defined in Table 20 for all these 0:MultiStateValueDiscreteType Variables. The "Locale" field of the 0:LocalizedText structures is Server specific.

The AxisType Variable contains the mechanical drive type of the represented Powertrain Axis Object modelled as 0:MultiStateValueDiscreteType.

Monitoring folder in Actual and Command Values sub-aspect

The Monitoring folder inherited from PtFunctionType contains Monitoring Variables describing measurements of the Powertrain Axis Objects which are of interest for monitoring encoded as numeric data type. The PtDriveAxisType ObjectType adds Variables and Properties common for all the derived concrete ObjectTypes. Each derived ObjectType may add the Variables and Properties specific for the respective ObjectType.

Instances of the Monitoring folder shall reference the IMonitoringElectric Interface using the HasInterface ReferenceType.

For a description of all Variables and Properties in the "Monitoring" folder see Table 54.

LimitSupervision folder in Process Supervision sub-aspect

The LimitSupervision folder contains Variables with Values describing limit values for motor current, torque, and the like. These limit Variables differ between concrete derived Axis ObjectTypes and are specified separately for each derived Axis ObjectType.

Instances of the LimitSupervision folder shall reference the ILimitSupervisionElectric Interface using the HasInterface ReferenceType.

For a description of the Variables in the "LimitSupervision" folder see Table 54.

Axis Properties sub-aspect

The CharacteristicsConverter Object contains Variables with Values describing key data of the CDM's converter. This ObjectType represents the electric converter properties of electric drives and shall be always provided for electric drives. However, future versions of this specification might support additional drive types such as hydraulic or pneumatic drives. For these drive types dedicated Objects might be specified and referenced with additional optional HasComponent References.

The CharacteristicsMotorAndControl folder contains Variables with Values describing key data of the CDM's motor and its key control features.

Instances of the CharacteristicsMotorAndControl folder shall reference the ICharacteristicsMotorAndControlElectric Interface using the HasInterface ReferenceType.

The VelocityProfile folder contains Variables describing key properties of brake ramps. In addition, this folder also contains Variables describing the properties of a ramp function generator often available with VSD drives. The folder contains the properties mandatory for each derived Powertrain Axis Object type.

The Variables VelocityRampUpTime and VelocityRampDownTime are always related to the Value of the NominalSpeed Variable. The Variable VelocityRampDeceleration describes the same ramp function as VelocityRampDownTime and shall therefore always be provided together with this Variable. The same is true for the Variables VelocityRampUpTime and VelocityRampAcceleration provided by derived axis types.

For a description of the Variables in the CharacteristicsMotorAndControl folder and the VelocityProfile folder see Table 54.

7.1.1.1 PtFrequencyDriveAxisType

A PtFrequencyDriveAxisType is a PtDriveAxisType representing the functionality of a VSD with a frequency command interface. Figure 9 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 9 - PtFrequencyDriveAxisType Block Diagram

The formal definition of the PtFrequencyDriveAxisType ObjectType can be found in Table 21.

Table 21 - PtFrequencyDriveAxisType Definition
AttributeValue
BrowseNamePtFrequencyDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:GeneratesEventObjectTypePtMotorCurrentLimitEventType
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectVelocityProfile0:FolderTypeM
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeO
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties

The components of the PtFrequencyDriveAxisType have additional subcomponents which are defined in Table 22.

Table 22 - PtFrequencyDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableFrequencyCommandValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableFrequencySetpoint0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableConverterOutputFrequency0:Float0:AnalogUnitTypeM, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodVelocityControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
LimitSupervision0:HasComponentVariableMotorCurrentLimitHigh0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampUpTime0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampAcceleration0:Float0:AnalogUnitTypeO, RO

For a description of the Variables see Table 54.

7.1.1.2 PtVelocityDriveAxisType

The PtVelocityDriveAxisType is an PtDriveAxisType representing the functionality of a VSD with a speed command interface. Figure 10 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 10 - PtVelocityDriveAxisType Block Diagram

The formal definition of the PtVelocityDriveAxisType ObjectType can be found in Table 23.

Table 23 - PtVelocityDriveAxisType Definition
AttributeValue
BrowseNamePtVelocityDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:HasComponentObjectVelocityProfile0:FolderTypeM
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:GeneratesEventObjectTypePtTorqueForceLimitEventType
0:GeneratesEventObjectTypePtMotorCurrentLimitEventType
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeO
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Limit Events

The components of the PtVelocityDriveAxisType have additional subcomponents which are defined in Table 24.

Table 24 - PtVelocityDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableVelocitySetpoint0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityCommandValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableAccelerationSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariable<EncoderxTemperature>0:FloatPtTemperatureVariableTypeOP, RO
Monitoring0:HasComponentVariableVelocityFollowingError0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodVelocityControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTorqueControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampUpTime0:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableVelocityRampAcceleration0:Float0:AnalogUnitTypeO, RO

For a description of the Variables see Table 54.

7.1.1.3 PtPositioningDriveAxisType

A PtPositioningDriveAxisType is an PtDriveAxisType representing the functionality of a servo drive or stepper drive with a motion trajectory command interface. Figure 11 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 11 - PtPositioningDriveAxisType Block Diagram

The formal definition of the PtPositioningDriveAxisType ObjectType can be found in Table 25.

Table 25 - PtPositioningDriveAxisType Definition
AttributeValue
BrowseNamePtPositioningDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:HasComponentObjectHoming0:FolderTypeM
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectVelocityProfile0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeM
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectMotionProgram0:FileTypeO
0:GeneratesEventObjectTypePtTorqueForceLimitEventType
0:GeneratesEventObjectTypePtMotorCurrentLimitEventType
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Limit Events

Some components of the PtPositioningDriveAxisType have additional subcomponents which are defined in Table 26.

Table 26 - PtPositioningDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariablePositionCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocitySetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariable<EncoderxTemperature>0:FloatPtTemperatureVariableTypeOP, RO
Monitoring0:HasComponentVariablePositionFollowingError0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityFollowingError0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentObjectTraversingTaskPtTraversingTaskTypeM
Monitoring0:HasComponentVariableOverride0:Float0:BaseDataVariableTypeO, RO
Monitoring0:HasComponentVariableHomingState0:UInt16PtHomingStateVariableTypeM, RO
LimitSupervision0:HasComponentVariableMotorCurrentLimitHigh0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitLow0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitHigh0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimiting0:Boolean0:BaseDataVariableTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodVelocityControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTrajectoryInterpolation0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodPositionControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTorqueControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTrajectoryInterpolationMode0:Byte0:MultiStateValueDiscreteTypeO, RO
Homing0:HasComponentVariableHomingDirection0:UInt16PtHomingDirectionVariableTypeO, RO
Homing0:HasComponentVariableHomingSpeedToCam0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingSpeedToMark0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingPointOffset0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingMode0:UInt16PtHomingModeVariableTypeM, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableSpindlePitch0:Float0:BaseDataVariableTypeO, RO
VelocityProfile0:HasComponentVariableJogPosInc10:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableJogPosInc20:Float0:AnalogUnitTypeO, RO

The SpindlePitch Variable shall be provided if a spindle is present in the Powertrain Axis Object.

The child Nodes of the PtPositioningDriveAxisType have additional Attribute values defined in Table 27.

Table 27 - PtPositioningDriveAxisType Attribute values for child Nodes
BrowsePathValue Attribute
CharacteristicsMotorAndControl
TrajectoryInterpolationMode
0:EnumValues

[

{ "Value":0,

"DisplayName": "LINEAR",

"Description": "Linear trajectory interpolation"

},

{ "Value":1,

"DisplayName": "VENDOR_SPECIFIC",

"Description": "Vendor specific trajectory interpolation"

}

]

For a description of the Variables see Table 54.

7.1.1.4 PtVelocityServoDriveAxisType

A PtVelocityServoDriveAxisType is an PtDriveAxisType representing the functionality of a servo drive with a velocity command interface. Figure 12 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 12 - PtVelocityServoDriveAxisType Block Diagram

The formal definition of the PtVelocityServoDriveAxisType ObjectType can be found in Table 28.

Table 28 - PtVelocityServoDriveAxisType Definition
AttributeValue
BrowseNamePtVelocityServoDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:HasComponentObjectEncoderChannelMotorPtEncoderChannelTypeM
0:HasComponentObjectEncoderChannelMechanicPtEncoderChannelTypeO
0:HasComponentObject<EncoderChannelAuxiliary>PtEncoderChannelTypeOP
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectHoming0:FolderTypeO
0:HasComponentObjectVelocityProfile0:FolderTypeM
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeO
0:GeneratesEventObjectTypePtAxisSwOvertravelEventType
0:GeneratesEventObjectTypePtAxisHwOvertravelEventType
0:GeneratesEventObjectTypePtTorqueForceLimitEventType
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Limit Events
Powertrain Encoder Channel

Some components of the PtVelocityServoDriveAxisType have additional subcomponents which are defined in Table 29.

Table 29 - PtVelocityServoDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableVelocitySetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityCommandValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableCurrentTorqueCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariable<EncoderxTemperature>0:FloatPtTemperatureVariableTypeOP, RO
Monitoring0:HasComponentVariableVelocityFollowingError0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableHomingState0:UInt16PtHomingStateVariableTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodVelocityControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTorqueControl0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingMode0:UInt16PtHomingModeVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableSpindlePitch0:Float0:BaseDataVariableTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitHigh0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimiting0:Boolean0:BaseDataVariableTypeO, RO

The SpindlePitch Variable shall be provided if a spindle is present in the Powertrain Axis Object.

For a description of the Variables see Table 54.

7.1.1.5 PtPositionServoDriveAxisType

A PtPositionServoDriveAxisType is an PtDriveAxisType representing the functionality of a servo drive with a position command interface. Figure 13 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 13 - PtPositionServoDriveAxisType Block Diagram

The formal definition of the PtPositionServoDriveAxisType ObjectType can be found in Table 30.

Table 30 - PtPositionServoDriveAxisType Definition
AttributeValue
BrowseNamePtPositionServoDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectEncoderChannelMotorPtEncoderChannelTypeM
0:HasComponentObjectEncoderChannelMechanicPtEncoderChannelTypeO
0:HasComponentObject<EncoderChannelAuxiliary>PtEncoderChannelTypeOP
0:HasComponentObjectHoming0:FolderTypeM
0:HasComponentObjectVelocityProfile0:FolderTypeM
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeO
0:GeneratesEventObjectTypePtAxisSwOvertravelEventType
0:GeneratesEventObjectTypePtAxisHwOvertravelEventType
0:GeneratesEventObjectTypePtTorqueForceLimitEventType
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Limit Events
Powertrain Encoder Channel

Some components of the PtPositionServoDriveAxisType have additional subcomponents which are defined in Table 31.

Table 31 - PtPositionServoDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariablePositionCommandValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocitySetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableVelocityCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableCurrentTorqueCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariable<EncoderxTemperature>0:FloatPtTemperatureVariableTypeOP, RO
Monitoring0:HasComponentVariablePositionFollowingError0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableVelocityFollowingError0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableHomingState0:UInt16PtHomingStateVariableTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitLow0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitHigh0:Float0:AnalogUnitTypeM, RO
LimitSupervision0:HasComponentVariableTorqueLimiting0:Boolean0:BaseDataVariableTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodVelocityControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodPositionControl0:Float0:AnalogUnitTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTorqueControl0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingDirection0:UInt16PtHomingDirectionVariableTypeO, RO
Homing0:HasComponentVariableHomingSpeedToCam0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingSpeedToMark0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingPointOffset0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingMode0:UInt16PtHomingModeVariableTypeM, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableSpindlePitch0:Float0:BaseDataVariableTypeO, RO
VelocityProfile0:HasComponentVariableJogPosInc10:Float0:AnalogUnitTypeO, RO
VelocityProfile0:HasComponentVariableJogPosInc20:Float0:AnalogUnitTypeO, RO

The SpindlePitch Variable shall be provided if a spindle is present in the Powertrain Axis Object.

For a description of the Variables see Table 54.

7.1.1.6 PtTorqueServoDriveAxisType

A PtTorqueServoDriveAxisType is an PtDriveAxisType representing the functionality of a servo drive with a torque command interface. Figure 14 shows a block diagram demonstrating the basic organization and control flow for this axis type.

Figure 14 - PtTorqueServoDriveAxisType Block Diagram

The formal definition of the PtTorqueServoDriveAxisType ObjectType can be found in Table 32.

Table 32 - PtTorqueServoDriveAxisType Definition
AttributeValue
BrowseNamePtTorqueServoDriveAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtDriveAxisType.
0:HasComponentObjectEncoderChannelMotorPtEncoderChannelTypeM
0:HasComponentObjectEncoderChannelMechanicPtEncoderChannelTypeO
0:HasComponentObject<EncoderChannelAuxiliary>PtEncoderChannelTypeOP
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectHoming0:FolderTypeO
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectCharacteristicsMotorAndControl0:FolderTypeM
0:HasComponentObjectLimitSupervision0:FolderTypeO
0:GeneratesEventObjectTypePtTorqueForceLimitEventType
Conformance Units
Powertrain Actual and Command Values
Powertrain Axis Properties
Powertrain Limit Events
Powertrain Encoder Channel

Some components of the PtTorqueServoDriveAxisType have additional subcomponents which are defined in Table 33.

Table 33 - PtTorqueServoDriveAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableAccelerationSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceSetpoint0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableCurrentTorqueCommandValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableTorqueForceCommandAdditiveValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariable<EncoderxTemperature>0:FloatPtTemperatureVariableTypeOP, RO
Monitoring0:HasComponentVariableHomingState0:UInt16PtHomingStateVariableTypeO, RO
CharacteristicsMotorAndControl0:HasComponentVariableTimePeriodTorqueControl0:Float0:AnalogUnitTypeO, RO
Homing0:HasComponentVariableHomingMode0:UInt16PtHomingModeVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableSpindlePitch0:Float0:BaseDataVariableTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimit0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimitHigh0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitLow0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableSoftwarePosLimitHigh0:Float0:AnalogUnitTypeO, RO
LimitSupervision0:HasComponentVariableTorqueLimiting0:Boolean0:BaseDataVariableTypeO, RO

The SpindlePitch Variable shall be provided if a spindle is present in the Powertrain Axis Object.

One of the TorqueForceCommandValue and CurrentTorqueCommandValue Variables shall be provided.

For a description of the Variables see Table 54.

7.1.2 PtEncoderAxisType definition

The PtEncoderAxisType ObjectType specifies the properties of encoder Objects.

Table 34 - PtEncoderAxisType definition
AttributeValue
BrowseNamePtEncoderAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the PtFunctionType.
0:HasComponentObjectEncoderChannelPtEncoderChannelTypeM
0:HasComponentObjectMonitoring0:FolderTypeM
Conformance Units
Powertrain Actual and Command Values
Powertrain Encoder Channel

Some components of the PtEncoderAxisType have additional subcomponents which are defined in Table 35.

Table 35 - PtEncoderAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableControlPriority0:UInt16PtControlPriorityVariableTypeM, RO
Monitoring0:HasComponentVariableVelocityActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariablePositionActualValue0:Double0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableAccelerationActualValue0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableEncoderTemperature0:FloatPtTemperatureVariableTypeO, RO

7.1.3 PtGearAxisType definition

The PtGearAxisType ObjectType specifies the properties of Objects representing gears.

Table 36 - PtGearAxisType definition
AttributeValue
BrowseNamePtGearAxisType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
0:HasComponentObjectCharacteristicsMechanics0:FolderTypeO
0:HasComponentObjectMonitoring0:FolderTypeM
0:HasComponentObjectMaintenance0:FolderTypeM
Subtype of the PtFunctionType.
Conformance Units
Powertrain Actual and Command Values

Some components of the PtGearAxisType have additional subcomponents which are defined in Table 37.

Table 37 - PtGearAxisType additional Subcomponents
BrowsePathReferencesNodeClassBrowseNameDataTypeTypeDefinitionOthers
Monitoring0:HasComponentVariableBrakeState0:UInt16PtBrakeStateVariableTypeO, RO
Monitoring0:HasComponentVariableAxisTorqueForce0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableAxisOutputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearInputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearInputTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearOutputVelocity0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearOutputTorque0:Float0:AnalogUnitTypeO, RO
Monitoring0:HasComponentVariableGearTemperature0:FloatPtTemperatureVariableTypeO, RO
Monitoring0:HasComponentVariableGearRatio0:Float0:AnalogUnitTypeM, RO
Monitoring0:HasComponentVariableGearState0:UInt16PtGearStateVariableTypeO, RO
Monitoring0:HasComponentVariableGearOutputShaftTurningDirection0:UInt16PtShaftTurningDirectionVariableTypeO, RO
Monitoring0:HasComponentVariableGearInputShaftTurningDirection0:UInt16PtShaftTurningDirectionVariableTypeO, RO
Maintenance0:HasComponentVariableGearBacklash0:Float0:AnalogUnitTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearFactorPrecisePtGearFactorDataType0:BaseDataVariableTypeO, RO
CharacteristicsMechanics0:HasComponentVariableGearRatio0:Float0:BaseDataVariableTypeO, RO