7.7 PtSafetyType

The PtSafetyType contains PtSafetyFunctionType Variables describing basic settings for safety functions.

Table 51 - PtSafetyType Definition
AttributeValue
BrowseNamePtSafetyType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the 0:BaseObjectType defined in OPC 10000-5.
0:HasComponentObjectSTOPtSafetyFunctionTypeM
0:HasComponentObjectSS1PtSafetyFunctionTypeO
0:HasComponentObjectSS2PtSafetyFunctionTypeO
0:HasComponentObjectSOSPtSafetyFunctionTypeO
0:HasComponentObjectSLSPtSafetyFunctionTypeO
0:HasComponentObjectSDIPtSafetyFunctionTypeO
0:HasComponentObjectSLAPtSafetyFunctionTypeO
0:HasComponentObjectSLPPtSafetyFunctionTypeO
Conformance Units
Powertrain Safety

The STO Object represents the status of the "Safe torque off" safety function.

The SS1 Object represents the status of the "Safe stop 1" safety function.

The SS2 Object represents the status of the "Safe stop 2" safety function.

The SOS Object represents the status of the "Safe operating stop" safety function.

The SLS Object represents the status of the "Safely limited speed" safety function.

The SDI Object represents the status of the "Safe direction" safety function.

The SLA Object represents the status of the "Safely limited acceleration" safety function.

The SLP Object represents the status of the "Safely limited position" safety function.

If a specific safety function is supported by the Axis/DO, the representing PtSafetyFunctionType Object shall be provided.