10.7 PtGearStateVariableType

The PtGearStateVariableType is a subtype of the 0:MultiStateValueDiscreteType. It is used to encode the state of gears. It is formally defined in Table 78.

Table 78 - PtGearStateVariableType definition
AttributeValue
BrowseNamePtGearStateVariableType
IsAbstractFalse
ValueRank-1 (-1 = Scalar)
DataType0:UInt16
ReferencesNodeClassBrowseNameDataTypeTypeDefinitionOther
Subtype of the 0:MultiStateValueDiscreteType defined in OPC 10000-8.
HasPropertyVariableEnumValuesEnumValueType[]PropertyTypeM
Conformance Units
Powertrain Actual and Command Values
Table 79 - PtGearStateVariableType Attribute values for child Nodes
BrowsePathValue Attribute
0:EnumValues

[

{ "Value":0,

"DisplayName": "IDLE",

"Description": "No gear"

},

{ "Value":1,

"DisplayName": "HIGH_GEAR",

"Description": "High gear"

},

{ "Value":2,

"DisplayName": "LOW_GEAR",

"Description": "Low gear"

},

{ "Value":3,

"DisplayName": "FIRST_GEAR",

"Description": "First gear"

},

{ "Value":4,

"DisplayName": "SECOND_GEAR",

"Description": "Second gear"

}

]

The predefined attribute values must be supported by the Server for each instance. Future versions of this specification might extend the value range. Vendors might extend the value range by appending "THIRD_GEAR", "FOURTH_GEAR" to the EnumValues array.