7.6 PtTraversingTaskType

The PtTraversingTaskType represents a traversing task.

Table 49 - PtTraversingTaskType Definition
AttributeValue
BrowseNamePtTraversingTaskType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of the 0:BaseObjectType defined in OPC 10000-5.
0:HasComponentVariableTraversingTaskNumber0:Int320:BaseDataVariableTypeM, RO
0:HasComponentVariableTargetPosition0:Float0:AnalogUnitTypeO, RO
0:HasComponentVariableVelocity0:Float0:AnalogUnitTypeO, RO
0:HasComponentVariableAcceleration0:Float0:AnalogUnitTypeO, RO
0:HasComponentVariableDeceleration0:Float0:AnalogUnitTypeO, RO
0:HasComponentVariablePositioningModuloMode0:UInt160:MultiStateValueDiscreteTypeM, RO
0:HasComponentVariablePositioningTaskChangeMode0:UInt160:MultiStateValueDiscreteTypeO, RO
Conformance Units
Powertrain Actual and Command Values

The TraversingTaskNumber Variable contains the number of the traversing task currently executed. Interpretation of TraversingTaskNumber:

TraversingTaskNumber ValueTraversing task executed
-5Jogging positive (S42)
-4Jogging negative (S42)
-3Homing procedure (S44)
-2MDI sub-mode active
-1No traversing task is executed: stand still (S41)
>=0Number of traversing task (0 - 1023)

If no traversing task is executed (TraversingTaskNumber == -1), the Value of all other Variables shall be 0. If a traversing task is executed (TraversingTaskNumber >=0), the AxisState Variable contains one of the values belonging to the S45 sub state machine (see [PDP], Figure 35 also).

The TargetPosition Variable contains the target position for the traversing task generator.

The Velocity Variable contains the desired speed for the traversing task generator.

The Acceleration Variable contains the desired acceleration for the traversing task generator.

The PositioningModuloMode Variable contains the information if the TargetPosition Variable must be interpreted as absolute or relative position encoded as 0:MultiStateValueDiscreteType defined in [OPC 10000-8]. The PositioningTaskChangeMode Variable corresponds to Bit 5 in DS402 control word " also encoded as 0:MultiStateValueDiscreteType. The content of their EnumStrings lookup table Properties is defined in Table 50.

Table 50 - PtTraversingTaskType Attribute values for child Nodes
BrowsePathValue Attribute
PositioningModuloMode
0:EnumValues

[

{ "Value":0,

"DisplayName": "NO_MODULO_FUNCTION",

"Description": "No traversing task is active"

},

{ "Value":1,

"DisplayName": "RELATIVE_POSITIONING",

"Description": "Relative Positioning"

},

{ "Value":2,

"DisplayName": "ABSOLUTE_SHORTEST_PATH_MODULO_DIRECTION _POSITIONING",

"Description": "The absolute position shall be reached by the shortest path"

},

{ "Value":3,

"DisplayName": "ABSOLUTE_POSITIVE_MODULO_DIRECTION _POSITIONING",

"Description": "The absolute position shall be reached by a motion in positive direction"

},

{ "Value":4,

"DisplayName": "ABSOLUTE_NEGATIVE_ MODULO_DIRECTION _POSITIONING",

"Description": "The absolute position shall be reached by a motion in negative direction"

}

]

PositioningTaskChangeMode
0:EnumValues

[

{ "Value":0,

"DisplayName": "CHANGE_TARGET_REACHED",

"Description": "Change traversing task after target position reached"

},

{ "Value":1,

"DisplayName": "CHANGE_IMMEDIATE",

"Description": "Change traversing task immediate"

}

]

The following table contains descriptions of the semantic for all possible Values of the PositioningModuloMode Variable.