Search

Scope: Core (OPC-10000-*) All specs

82 result(s) for Identification

OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics

7 Identification of Asset

Identification of Asset For the identification of an asset, this specification mainly uses Properties defined in OPC 10000-100 . In order to support already released companion specifications and products ... defined in OPC 10000-100 . The Properties defined in OPC 10000-100 for identification can either be implemented directly on the Object representing the asset, or in a grouping Object
OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics

10.2 Version Information

Properties are already defined in OPC 10000-100 , at the same level where the identification is defined. Therefore, this specification uses those Properties as defined in OPC 10000-100 . They ... deployed in the same way as the identification information as defined in section 7 . Those Properties include: HardwareRevision providing the revision level of the hardware SoftwareRevision providing the revision level
OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation

7.4.5 OneTimeCalibrationTargetCategoryType ObjectType

same characteristics. In that case, the information provided by the CalibrationTargetType , like 2: Identification , represents the batch of calibration targets. The ObjectType is formally defined in Table 55 . Table
OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture

7.1.2 Overview

Object 2:ParameterSet BaseObjectType Mandatory HasComponent Object 2:MethodSet BaseObjectType Mandatory HasComponent Object 2:Identification FunctionalGroupType Mandatory HasComponent Object General FunctionalGroupType Mandatory HasProperty Variable 2:SerialNumber String PropertyType Optional HasProperty ... ObjectType overrides the Object and changes the ModellingRule to Mandatory. The optional Object Identification shall be provided and shall reference the Parameters defined in Table 9 . Those Parameters together uniquely
OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture

7.5.2 Overview

Object 2:ParameterSet BaseObjectType Mandatory HasComponent Object 2:MethodSet BaseObjectType Mandatory HasComponent Object 2:Identification FunctionalGroupType Mandatory HasComponent Object Capabilities FunctionalGroupType Mandatory HasComponent Object Management FunctionalGroupType Mandatory HasComponent Object Statistics ... ObjectType overrides the Object and changes the ModellingRule to Mandatory. The optional Object Identification shall be provided and shall reference the Parameters defined in Table 24 . Those Parameters together uniquely
OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture

7.6.2 Overview

ObjectType overrides the Object and changes its ModellingRule to Mandatory. The optional Object Identification is not used in this ObjectType. The Object < GroupIdentifier > has the ModellingRule OptionalPlaceholder
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.1.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasComponent Object Configuration BaseConfigurationType M 0:HasComponent Object Capabilities MachineEngineCapabilitiesType ... GeneratesEvent ObjectType VendingBaseAuditEventType 0:GeneratesEvent ObjectType ConfigurationChangedEventType Conformance Units UnattendedRetail MachineEngine The 2: Identification Object provides Properties describing the identification of the machine engine (see 7.2 for details). The Configuration
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.8.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasComponent Object Delivery PaymentServiceDeliveryType M 0:HasComponent Object Configuration BaseConfigurationType ... GeneratesEvent ObjectType VendingAuditEventType 0:GeneratesEvent ObjectType ConfigurationChangedEventType Conformance Units UnattendedRetail PaymentService The 2: Identification Object provides Properties describing the identification of the payment service (see 7.2 for details). The Delivery
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.16.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasProperty Variable IsEmulated Boolean 0:PropertyType M 0:HasComponent Variable Status PaymentModeOrDeviceStatusEnum ... Units UnattendedRetail PaymentService UnattendedRetail PaymentDevice Coin UnattendedRetail PaymentDevice Bill UnattendedRetail PaymentDevice Cashless The 2: Identification Object provides Properties describing the identification of the payment device (see 7.2 for details
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.23.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasComponent Object Configuration BaseConfigurationType M 0:HasComponent Object Components BaseComponentsType ... GeneratesEvent ObjectType VendingBaseAuditEventType 0:GeneratesEvent ObjectType ConfigurationChangedEventType Conformance Units UnattendedRetail UI The 2: Identification Object provides Properties describing the identification of the UI (see 7.2 for details). The Configuration Object
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.24.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasComponent Object Configuration BaseConfigurationType M 0:HasComponent Object PriceInformation PriceInformationType ... Object Components BaseComponentsType O 0:GeneratesEvent ObjectType ConfigurationChangedEventType Conformance Units UnattendedRetail PriceService The 2: Identification Object provides Properties describing the identification of the price service (see 7.2 for details
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

7.25.2 ObjectType definition

Class BrowseName DataType TypeDefinition Other Subtype of the 0:BaseObjectType 0:HasComponent Object 2:Identification IdentificationType M 0:HasComponent Object Configuration BaseConfigurationType M 0:HasComponent Variable IsCollectingAudit 0:Boolean ... Object Components BaseComponentsType O 0:GeneratesEvent ObjectType ConfigurationChangedEventType Conformance Units UnattendedRetail AuditCollect The 2: Identification Object provides Properties describing the identification of the audit collect (see 7.2 for details
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.1 LADSDeviceType ObjectType Definition

HasProperty Variable 3:HierarchicalLocation 0:String 0:PropertyType O 0:HasAddIn Object 2:Identification 4:MachineIdentificationType M 0:HasProperty Variable 3:OperationalLocation 0:String 0:PropertyType O 0:HasComponent Object ... delineated in the OPC UA for AutoId Devices Release 1.01.1 (2021-07-13) specification. Identification provides properties to identify a Device . Recommendations for the Identification: If the device consists solely
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

7.1.3 LADSComponentType ObjectType Definition

HasAddIn Object Components LADSComponentsType O 0:HasAddIn Object 2:Identification M 0:HasComponent Object Maintenance MaintenanceSetType O 0:HasProperty Variable 3:OperationalLocation 0:String 0:PropertyType O 0:HasProperty Variable ... spec (should be " ComponentSet " ). This is for harmonization with the Machinery Specification. Identification provides the properties to identify a device. Recommendations for Identification: • If the Component consists solely
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

7.3 No duplicated Nodes

Figure 8 , an example is given. The X: SpecificMachineType is referencing the 2: Identification Object directly and from the MachineryBuildingBlocks Object . The Object Machine123 of X: SpecificMachineType is doing ... same, and not duplicating the 2: Identification Object (which would be an allowed instantiation, see OPC 10000-3 ). This avoids unnecessary Nodes and potentially inconsistent data, like in Object Machine124
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

14.1 Overview

this case, the X:SpecificMachineType also references the building block directly (like 2: Identification ), in order to simplify the usage for Clients purely developed based ... providing operation counters, is given. This example leaves out any other building blocks like identification or domain-specific organizations. Like the machine, also the component provides the operation counters. Figure
OPC-40001-3 – OPC UA for Machinery - Part 3: Job Management

7.6 Material

well as the 2: MaterialDefinitionID shall be provided. If the 2: MaterialDefinitionID and the Identification is provided, the ItemNumber of the Identification shall be identical to the 2: MaterialDefinitionID ... MaterialLotID and the Identification is provided, the LotNumber shall be identical to the 2: MaterialLotID . In Table 3 , predefined key-value pairs for 2: MaterialRequirements and 2: MaterialActuals is provided
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

7.1 CraneMotionDeviceSystemType ObjectType Definition

BaseObjectType M 0:HasComponent Object ProtectiveFunctions 0:FolderType O 0:HasAddIn Object 2:Identification 4:MachineIdentificationType M 0:HasAddIn Object 4:Components 4:MachineComponentsType O 0:HasComponent Object 2:Operational ... down and/or stop the motion of the crane in one or more axis. The Identification Object provides identification information of the crane. It is specified
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

7.2.1 Overview

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 4:MachineIdentificationType M 0:HasAddIn Object 4:Components 4:MachineComponentsType O 0:HasComponent Object 2:Operational 2:FunctionalGroupType ... CraneMotionDeviceSystemType. Variables are also referenced by an Organizes from the Operational FunctionalGroup. The Identification Object provides identification information of the crane component. It is specified
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

7.4 BrakeType ObjectType Definition

FunctionalGroupType O 0:HasComponent Object 2:ParameterSet 0:BaseObjectType M 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O Conformance Units Cranes Base Info BrakeType The Identification Object provides identification information
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

7.5 CraneMotorType ObjectType Definition

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 2:Operational 2:FunctionalGroupType O Conformance Units Cranes Base Info CraneMotorType The Identification ... Object provides identification information of the motor. It is specified in OPC 10000-100 and OPC 40001-1. The Operational FunctionalGroup contains variables which represent the current state
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

7.6.1 Overview

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 2:ParameterSet 0:BaseObjectType M 0:HasComponent Object 2:Operational 2:FunctionalGroupType ... ProtectiveFunctionType The Name variable contains a human-readable textual identifier of the function. The Identification Object provides identification information of the protective function. It is specified
OPC-40082-1 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 1: Temperature control devices

6.1 TCD_InterfaceType Definition

Other Subtype of 0: BaseObjectType defined in OPC UA Part 5 0:HasComponent Object Identification 3:IdentificationType M 0:HasComponent Object TCDSpecification TCDSpecificationType M 0:HasComponent Object MachineConfiguration 3:MachineConfigurationType ... only defines the TCD_InterfaceType . The instance is generated in the local server Identification http://opcfoundation.org/UA/ PlasticsRubber/TCD/ server specific The object Identification is a child of TCD_InterfaceType which
OPC-40082-1 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 1: Temperature control devices

7 Identification

Identification The IdentificationType for the identification of the device is defined in OPC 40083. All mandatory nodes shall be filled with valid values from the server. The DeviceClass Property ... Identification Object shall have the value "Temperature Control Device
OPC-40082-2 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 2: Hot runner devices

6.1 HRD_InterfaceType Definition

Other Subtype of 0:BaseObjectType defined in OPC UA Part 5 0:HasComponent Object Identification 3:IdentificationType M 0:HasComponent Object MachineConfiguration 3:MachineConfigurationType M 0:HasComponent Object Operation OperationType ... only defines the HRD_InterfaceType . The instance is generated in the local server Identification http://opcfoundation.org/UA/PlasticsRubber/HotRunner/ server specific The object Identification is a child of HRD_InterfaceType which
OPC-40082-3 – OPC UA interfaces for plastics and rubber machinery - Peripheral devices - Part 3: LSR Dosing Systems

6.1 LDS_InterfaceType Definition

Other Subtype of 0: BaseObjectType defined in OPC UA Part 5 0:HasComponent Object Identification 3:IdentificationType M 0:HasComponent Object MachineConfiguration 3:MachineConfigurationType M 0:HasComponent Object Operation OperationType ... only defines the LDS_InterfaceType . The instance is generated in the local server Identification http://opcfoundation.org/UA/ PlasticsRubber/LDS/ server specific The object Identification is a child of LDS_InterfaceType which
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions

B.1 Identification

Identification In the ExtrusionDeviceType , the Object MachineInformation ( MachineInformationType from OPC 40083) has been replaced by Identification ( MachineIdentificationType from OPC 40001-1). Table 25 - Comparison of machine identification in v1.01 ... v2.0 Version 1.01 MachineInformation Version 2.00 Identification Inherited from ComponentType Applied from IVendorNameplateType Applied from IVendorNameplateType Manufacturer mandatory (override in MachineInformationType) Manufacturer mandatory ManufacturerUri optional ManufacturerUri optional Model mandatory (override
OPC-40084-1 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 1: General Type Definitions

B.2 Status

Comparison of machine status in v1.01 and v2.0 Version 1.01 ExtrusionDeviceType Status Version 2.00 Identification Name Value MachineryItemState MachineryOperationMode OFFLINE 0 NotAvailable any IDLE 1 NotExecuting any PREPARING 2 Executing
OPC-40084-3 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 3: Extruder

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Extruder
OPC-40084-4 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 4: Haul-off

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Haul
OPC-40084-5 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 5: Melt pump

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Melt pump
OPC-40084-6 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 6: Filter

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Filter
OPC-40084-7 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 7: Die

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Extruder
OPC-40084-8 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 8: Pelletizer

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Pelletizer
OPC-40084-9 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 9: Cutter

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Cutter
OPC-40084-10 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 10: Calibrator

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Calibrator
OPC-40084-12 – OPC UA interfaces for plastics and rubber machinery - Extrusion - Part 12: Calender

6.2 DeviceClass

DeviceClass The DeviceClass Property in the Identification Object inside the ExtrusionDeviceType shall have the value "Calender
OPC-40200 – OPC UA for Weighing Technology

7.1.3 ObjectType Description

speed of the feeder. MinimalFeederSpeed defines the minimal possible speed of the feeder. The Identification - AddIn contains information about the identification and nameplate of a feeder. MachineryItemState is used
OPC-40200 – OPC UA for Weighing Technology

7.2.3 ObjectType Description

print media in percent (e.g., ink, wear of thermal element, etc.). The Identification - AddIn contains information about the identification and nameplate of a printer. MachineryItemState is used as defined
OPC-40200 – OPC UA for Weighing Technology

7.3.3 ObjectType Description

ObjectType Description The Identification - AddIn contains information about the identification and nameplate of a machine. A scale system can contain one or more scales. The scales must be a subtype ... scale or need to be complied by the scale. ProcessStateId contains a relating identification for the occurring ProcessStateMessage . ProcessStateMessage contains the message of the current overall state of the scale
OPC-40210 – OPC UA for Geometric Measurement Systems

8.14 RotaryTableType

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 3:MachineryItemIdentificationType 0:Mandatory 0:HasProperty Variable IsIntegrated 0:Boolean 0:PropertyType 0:Mandatory 0:HasProperty Variable NumberOfAxes ... Byte 0:PropertyType 0:Mandatory Conformance Units GMS RotaryTableType Identification is performed according to MachineryIdentificationType . IsIntegrated is defined as True if the RotaryTable is integrated into the GMS and cannot
OPC-40210 – OPC UA for Geometric Measurement Systems

8.15 SensorExchangeRackType

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 3:MachineryItemIdentificationType 0:Mandatory 0:HasProperty Variable IsAvailable 0:Boolean 0:PropertyType 0:Mandatory Conformance Units GMS SensorExchangeRackType Identification
OPC-40210 – OPC UA for Geometric Measurement Systems

8.16 TipExchangeRackType

inheriting the InstanceDeclarations of that Node. 0:HasAddIn Object 2:Identification 3:MachineryItemIdentificationType 0:Mandatory 0:HasProperty Variable IsAvailable 0:Boolean 0:PropertyType 0:Mandatory Conformance Units GMS SensorExchangeRackType Identification
OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management

6.3 PtAssetType and Identification

PtAssetType and Identification In the Table 18 the properties that are required for identifying assets of a powertrain are described. Since there are already several OPC UA specification existing that ... interfaces to be compliant. Figure 14 shows the overview of the PtAssetType and its identification concept including all related specifications and type definitions. Figure 14 - PtAssetType The PtAssetType references directly
OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management

6 Machine Tools Information Model Overview

Figure 8 shows the inheritance hierarchy of all ObjectTypes used in the MachineToolType's Identification component . This relates to the document structure in 8.3. Figure 8 - Inheritance Hierarchy ... Identification in the Machine Tools Interface Figure 9 shows the inheritance hierarchy of all types used in the MachineToolType's Monitoring component. This conforms to the structure of the section
OPC-40505 – OPC UA for Wireless Machine Tool Peripherals

7.1.1 Overview

References SourceBrowsePath Reference Type Is Forward TargetBrowsePath 3:MachineryBuildingBlocks 0:HasAddIn True DeviceInformation 2:Identification 3:MachineryBuildingBlocks 0:HasAddIn True 3:LifetimeCounters 3:MachineryBuildingBlocks 0:HasAddIn True 3:OperationCounters ... Method SendLicenseData O DeviceConfiguration 0:HasComponent Method SwitchCalibrationMode O DeviceInformation 0:HasAddIn Object 2:Identification 3:MachineryComponentIdentificationType M DeviceInformation 0:HasComponent Object BatteryLevel 6:ProcessValueType O DeviceInformation 0:HasProperty Variable
OPC-40560 – OPC UA for Mining - General

7.2.3 ObjectType Description

constituent instance declarations of the MachineComponentsType , please refer to OPC 40001-1. The Identification Object of type MiningEquipmentIdentificationType is an AddIn-Feature, allowing a structured way to represent machine identification
OPC-40561-1 – OPC UA for Mining - Part 1: Extraction General

A.1 Namespace and identifiers for OPC 40561-1 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40561-2 – OPC UA for Mining - Extraction - Part 2: Shearer Loader

A.1 Namespace and identifiers for OPC 40561-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40562-1 – OPC UA for Mining - Loading - Part 1: General

A.1 Namespace and identifiers for OPC 40562-1 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40562-2 – OPC UA for Mining - Loading - Part 2: Hydraulic Excavator

A.1 Namespace and identifiers for OPC 40562-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40563-1 – OPC UA for Mining - Transport Dumping - Part 1: General

A.1 Namespace and identifiers for OPC 40563-1 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40563-2 – OPC UA for Mining - Transport Dumping - Part 2: Armoured Face Conveyor

A.1 Namespace and identifiers for OPC 40563-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40563-3 – OPC UA for Mining - Transport Dumping - Part 3: Rear Dump Truck

A.1 Namespace and identifiers for OPC 40563-3 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40564-1 – OPC UA for Mining - Mineral Processing - Part 1: General

Annex A OPC 40563-1 Namespace and mappings (Normative)

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40564-2 – OPC UA for Mining - Mineral Processing - Part 2: Rock Crusher

A.1 Namespace and identifiers for OPC 40564-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40565-1 – OPC UA for Mining - Development Support - Part 1: General

A.1 Namespace and identifiers for OPC 40565-1 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40565-2 – OPC UA for Mining - Development Support - Part 2: Roof Support System

A.1 Namespace and identifiers for OPC 40565-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40565-3 – OPC UA for Mining - Development - Part 3: Dozer

10.1 Namespace and identifiers for OPC 40565-3 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40566-1 – OPC UA for Mining - Monitoring Supervision Services - Part 1: General

A.1 Namespace and identifiers for OPC 40566-1 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40567-1 – OPC UA for Mining - PELO Services - Part 1: General

A.1 Namespace and identifiers for OPC 40567-1 Information Model

take for example, the MiningEuipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40567-2 – OPC UA for Mining - PELO Services - Part 2: Face Alignment System

A.1 Namespace and identifiers for OPC 40567-2 Information Model

take for example, the MiningEquipmentType ObjectType Node which has the add-in Identification object . The Name for the Identification InstanceDeclaration within the MiningEquipmentType declaration is: MiningEquipmentType_Identification . The NamespaceUri
OPC-40600 – OPC UA for Weihenstephan Standards

7.1 WSMachineType ObjectType Definition

FunctionalGroupType O 0:HasComponent Object Counters 2:FunctionalGroupType O 0:HasAddIn Object 2:Identification 3:MachineIdentificationType M 0:HasComponent Object MeasuredValues 2:FunctionalGroupType O 0:HasComponent Object OperatingModes 2:FunctionalGroupType ... description of the individual WS Categories can be found in Table 10 . The Identification -AddIn contains information about the identification and nameplate of a machine. WSMachineProfile provides the machine profile
OPC-40700 – OPC UA for Surface Technology - General Types

7.1 STSysType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineIdentificationType O 0:HasAddIn Object 4:Components 4:MachineComponentsType O 0:HasComponent Object ... HasComponent Object 4:MachineryBuildingBlocks 0:FolderType M 0:HasComponent Object Description 0:FolderType O Identification is used as defined in OPC 40001-1. It represents numerous identification features
OPC-40700 – OPC UA for Surface Technology - General Types

7.2 STCompType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType O 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M 0:HasComponent Object Description 0:FolderType O Identification is used as defined in OPC 40001-1. It represents numerous identification features of the component. Monitoring
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

6 Shot Blasting Technology Information Model overview

Machinery specification are used in this Companion Specification. This is the Building Block Identification , which maps all available characteristics of the system. The MachineryOperationCounter and the MachineryLifetimeCounter are used
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.1 ShotBlastMachineType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineIdentificationType M 0:HasAddIn Object 3:Components 3:MachineComponentsType M 0:HasComponent Object ShotBlastMedia ... RefillSilo ShotBlastMachine Pressurised ShotBlastMachine Filtration System ShotBlastMachine PAEFS Filtration System ShotBlastMachine StateMachines ShotBlastMachine JobManagement Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.2 ShotBlastChamberType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineIdentificationType M 0:HasAddIn Object 3:Components 3:MachineComponentsType M 0:HasProperty Variable LoadingState ... HasComponent Object 3:MachineryBuildingBlocks 0:FolderType M Conformance Units ShotBlastChamber Multiple Blasters Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.3 BlasterType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineryComponentIdentificationType M 0:HasComponent Object Monitoring 0:FolderType M 0:HasComponent Object 3:MachineryBuildingBlocks ... FolderType M Conformance Units Wheel Blaster Pressurised Blaster Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn in the MachineryBuildingBlocks Folder. Monitoring
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.6 PressurisedBoilerType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineryComponentIdentificationType M 0:HasComponent Object Monitoring 0:FolderType M 0:HasComponent Object 3:MachineryBuildingBlocks ... FolderType M Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn in the MachineryBuildingBlocks Folder. Monitoring is representing a collection of the variables
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.7 ConveyorType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineryComponentIdentificationType M 0:HasComponent Object Monitoring 0:FolderType O 0:HasComponent Object 3:MachineryBuildingBlocks ... FolderType M Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn in the MachineryBuildingBlocks Folder. Monitoring is representing a collection of the variables
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

7.10 FiltrationType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 3:MachineryComponentIdentificationType M 0:HasComponent Object Monitoring 0:FolderType M 0:HasComponent Object 3:MachineryBuildingBlocks ... FolderType M Conformance Units Filtration Status Monitoring Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn in the MachineryBuildingBlocks Folder. Monitoring is representing
OPC-40719 – OPC UA for Plasma Surface Technology

6 Plasma Surface Technology Information Model overview

Machinery specification are used in this Companion Specification. This is the Building Block Identification , which maps all available characteristics of the system. The MachineryOperationCounter and the MachineryLifetimeCounter are used
OPC-40719 – OPC UA for Plasma Surface Technology

7.1 PlasmaSurfaceMachineType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineIdentificationType M 0:HasAddIn Object 4:Components 4:MachineComponentsType M 0:HasComponent Object ... Conformance Units PST PlasmaSurfaceMachineType Basic PST PlasmaSurfaceMachineType JobManagement PST PlasmaSurfaceMachineType OperationMode PST PlasmaSurfaceMachineType Advanced Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn
OPC-40719 – OPC UA for Plasma Surface Technology

7.4 PlasmaGeneratorType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType M 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M Conformance Units PST PlasmaGeneratorType Basic PST PlasmaGeneratorType Advanced Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn
OPC-40719 – OPC UA for Plasma Surface Technology

7.5 PrecursorSystemType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasAddIn Object 4:Components 4:MachineComponentsType M 0:HasComponent Object ... Object 4:MachineryBuildingBlocks 0:FolderType M Conformance Units PST PrecursorSystemType Basic PST PrecursorSystemType Advanced Identification is used as defined in OPC 40001-1 and shall also be referenced as AddIn
OPC-40719 – OPC UA for Plasma Surface Technology

7.6 GasSystemType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasAddIn Object 4:Components 4:MachineComponentsType M 0:HasComponent Object ... Object 4:MachineryBuildingBlocks 0:FolderType M Conformance Units PST GasSystemType Basic PST GasSystemType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn
OPC-40719 – OPC UA for Plasma Surface Technology

7.8.1 Overview

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasAddIn Object 4:Components 4:MachineComponentsType M 0:HasComponent Object ... Object 4:MachineryBuildingBlocks 0:FolderType M Conformance Units PST PlantCoolingSystemType Basic PST PlantCoolingSystemType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn
OPC-40719 – OPC UA for Plasma Surface Technology

7.9 ProcessingChamberType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType M 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M Conformance Units PST ProcessingChamberType Basic PST ProcessingChamberType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn in the MachineryBuildingBlocks
OPC-40719 – OPC UA for Plasma Surface Technology

7.10 HeatingSystemType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType M 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M Conformance Units PST HeatingSystemType Basic PST HeatingSystemType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn in the MachineryBuildingBlocks
OPC-40719 – OPC UA for Plasma Surface Technology

7.11 WorkpieceMotionDeviceType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType M 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M Conformance Units PST WorkpieceMotionDeviceType Basic PST WorkpieceMotionDeviceType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn in the MachineryBuildingBlocks
OPC-40719 – OPC UA for Plasma Surface Technology

7.12 PlasmaJetType ObjectType Definition

Other Subtype of the BaseObjectType defined in OPC 10000-5 0:HasAddIn Object 2:Identification 4:MachineryComponentIdentificationType O 0:HasComponent Object 4:Monitoring 4:MonitoringType M 0:HasComponent Object ... MachineryBuildingBlocks 0:FolderType M Conformance Units PST PlasmaJetType Basic PST PlasmaJetType Identification PST PlasmaJetType Advanced Identification is used as defined in OPC 40001-1. Shall also be referenced as AddIn