7.6 Material
For all Material provided, the optional 2:Quantity and 2:EngineeringUnits as well as the 2:MaterialDefinitionID shall be provided.
If the 2:MaterialDefinitionID and the Identification is provided, the ItemNumber of the Identification shall be identical to the 2:MaterialDefinitionID.
If the 2:MaterialLotID and the Identification is provided, the LotNumber shall be identical to the 2:MaterialLotID.
In Table 3, predefined key-value pairs for 2:MaterialRequirements and 2:MaterialActuals is provided. The table indicates, in which data structure the key-value pair is expected to be used.
| ID | DataType of Value | Description | Engineering Units | Subparameters | In | Out |
| DrawingNumber | String | Number of the drawing related to an item | - | DrawingVersion Number | X | X |
DrawingVersionNumber | String | Drawing version | - | - | X | X |
| Location | String | Location defines source or destination location of the material, depending if it is an input or an output material. | - | - | X | X |
| RelatedContainer | String | Defines the storage location from which the material is taken or in which it is placed. | - | - | X | X |
| Identification | OutputInformationDataType | Identification of the output | - | - | X | X |
| StartTime | 0:DateTime | Output of first item | - | - | - | X |
| EndTime | 0:DateTime | Output of last item | - | - | - | X |
| ProcessIrregularity | ProcessIrregularity | Defines if a process irregularity has been detected. A process irregularity might for example be the breakage of a tool, or exceeding a temperature limit on coolant. | - | - | - | X |