Search

Scope: Core (OPC-10000-*) All specs

64 result(s) for HasModellingRule

OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.5.1 Object NodeClass

contained in the Object . HasProperty 0..* HasProperty References identify the Properties of the Object . HasModellingRule 0..1 Objects can point to at most one ModellingRule Object using a HasModellingRule Reference ... Properties for Objects . To specify its ModellingRule , an Object can use at most one HasModellingRule Reference pointing to a ModellingRule Object . ModellingRules are defined in 6.4.4 . HasNotifier and HasEventSource References
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.6.2 Variable NodeClass

Attribute is not provided the information provided by these additional Fields is unknown. References HasModellingRule 0..1 Variables can point to at most one ModellingRule Object using a HasModellingRule Reference ... automation data. To specify its ModellingRule , a Variable can use at most one HasModellingRule Reference pointing to a ModellingRule Object . ModellingRules are defined in 6.4.4 . If the Variable is created
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.7.1 Method NodeClass

TRUE means executable). References HasProperty 0..* HasProperty References identify the Properties for the Method . HasModellingRule 0..1 Methods can point to at most one ModellingRule Object using a HasModellingRule Reference ... Properties for Methods . To specify its ModellingRule , a Method can use at most one HasModellingRule Reference pointing to a ModellingRule Object . ModellingRules are defined in 6.4.4 . GeneratesEvent References identify that
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.2.1 InstanceDeclaration

InstanceDeclaration is an Object , Variable or Method that references a ModellingRule with a HasModellingRule Reference and is the TargetNode of a hierarchical Reference from a TypeDefinitionNode or another InstanceDeclaration . There
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.3.2 Fully-inherited InstanceDeclarationHierarchy

table of Nodes and the bottom half is the table of References (the HasModellingRule references have been omitted from the table for the sake of clarity; all Nodes except
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.3.3 Overriding InstanceDeclarations

InstanceDeclaration may be changed as defined in 6.4.4.2 . Each overriding InstanceDeclaration needs its own HasModellingRule and HasTypeDefinition References , even if they have not been changed. A subtype should not override
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

7.12 HasModellingRule ReferenceType

HasModellingRule ReferenceType The HasModellingRule ReferenceType is a concrete ReferenceType and can be used directly. It is a subtype of NonHierarchicalReferences . The semantic of this ReferenceType is to bind the ModellingRule ... subtypes. Each Node shall be the SourceNode of at most one HasModellingRule Reference
OPC-10000-4 – OPC Unified Architecture - Part 4: Services

7.22.3 EventFilter

from the fully inherited EventType where the Node is also the source of a HasModellingRule reference. EventTypes , InstanceDeclarations and Modelling Rules are described completely in OPC 10000-3 . In some
OPC-10000-5 – OPC Unified Architecture - Part 5: Information Model

3.3 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings

F.3 UANode

reverse references unless reverse references are not appropriate given the ReferenceType semantics. HasTypeDefinition and HasModellingRule are two examples where it is not appropriate to add reverse references. When a UANodeSet
OPC-10000-100 – OPC Unified Architecture - Part 100: Devices

3.3.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-110 – OPC Unified Architecture - Part 110: Asset Management Basics

3.3.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping

3.3.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-200 – OPC Unified Architecture - Part 200: Industrial Automation

3.3.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-210 – OPC Unified Architecture - Part 210: Relative Spatial Location

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-10031-4 – OPC UA for ISA-95 - Part 4: Job Control

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30010 – OPC UA for AutoId Devices - AutoID: OPC UA for AutoId Devices

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30040 – OPC UA for AutomationML - Xxx: OPC UA Information Model for AutomationML

3.3.2 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30060 – OPC UA for Tobacco Machine Communication

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . Table 1 - Examples of DataTypes Notation DataType ValueRank
OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>

3.3.3.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30100 – OPC UA for SERCOS Devices

4.3.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30140 – OPC UA for PROFINET

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30141 – OPC UA for PROFIenergy

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30142 – OPC UA for PROFINET Remote IO

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>

3.5.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives

3.5.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30200 – OPC UA for Commercial Kitchen Equipment

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30250 – OPC Unified Architecture for DEXPI

4.2.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30270 – OPC UA for Asset Administration Shell (AAS)

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-34100 – OPC UA for Energy Consumption Management

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

3.4.1.1 Node Definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40010-1 – OPC UA for Robotics - Part 1: Vertical Integration

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40083 – OPC UA for Plastics and Rubber Machinery - General Type Definitions

3.2.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40100-2 – OPC UA for Machine Vision - Part 2: Asset Management and Condition Monitoring

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40210 – OPC UA for Geometric Measurement Systems

4.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40223 – OPC UA for Pumps and Vacuum Pumps

3.3.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40250-1 – OPC UA for Compressed Air Systems - Part 1: Main Control Systems

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40301 – OPC UA for Flat Glass Processing

3.5.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40400-1 – OPC UA for the Powertrain - Part 1: Asset Management

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40444 – OPC UA for Textile Testing Devices

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40501-1 – OPC UA for Machine Tools - Part 1: Machine Monitoring and Job Management

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40502 – OPC UA for Computerized Numerical Control (CNC) Systems - for CNC Systems: OPC UA Information Model

3.3.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40503-1 – OPC UA for Metal Forming - Part 1: General

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40505 – OPC UA for Wireless Machine Tool Peripherals

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40530 – OPC UA for Laser Systems

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40540 – OPC UA for Additive Manufacturing

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40560 – OPC UA for Mining - General

3.2.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40570 – OPC UA for Wire Harness Manufacturing

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40600 – OPC UA for Weihenstephan Standards

3.4.1 Conventions for Node descriptions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40700 – OPC UA for Surface Technology - General Types

3.3.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems

3.3.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40719 – OPC UA for Plasma Surface Technology

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided
OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)

3.4.1.1 Node definitions

rule in the ModellingRule column. In the AddressSpace , the Node shall use a HasModellingRule Reference to point to the corresponding ModellingRule Object . If the NodeId of a DataType is provided