This section describes the CsppMachineType ObjectType definition and Node definition referred to from the CsppMachineType ObjectType. Figure 62 shows a full picture of the CsppMachineType ObjectType.

Figure 62 – Full Picture of CsppMachineType ObjectType

Definition of the CsppMachineType ObjectType is shown in Table 61.

Table 61 – Definition of CsppMachineType ObjectType

Attribute	Value
BrowseName	CsppMachineType
IsAbstract	True
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule	Details
Subtype of the DeviceType defined in OPC 10000-100
HasComponent	Object	1:ParameterSet	-	BaseObjectType	Mandatory	6.2.1.2
HasComponent	Object	<CommIfSection>	-	FunctionalGroupType	MandatoryPlaceholder	6.2.1.3

ModellingRule of the ParameterSet Object is Optional in the source of the inheritance but that of the CsppMachineType ObjectType should be Mandatory. The definition of the ParameterSet Object itself is overridden. For details, refer to 6.2.1.2.

Objects shown by <CommIfSection> correspond to COMM_IF section of the CSP+ for machine and take a role to group the machine information held by the machine.

The ParameterSet Object takes a role to organize machine information held by the machine Object. Table 62 shows the definition of the ParameterSet Object.

Table 62 – Definition for ParameterSet Object

Attribute	Value
BrowseName	1:ParameterSet
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule	Details
HasTypeDefinition	ObjectType	0:BaseObjectType
HasComponent	Variable	<VariableName>	(Any)	DataItemType	OptionalPlaceholder	-
HasComponent	Variable	<ConfigurationName>	(Any)	DataItemType	OptionalPlaceholder	-

DataVariables shown by <VariableName> correspond to the CSPP elements in the COMM_IF_VARIABLE part of the CSP+ for machine. The VariableType is DataItemType VariableType specified by the OPC 10000-8 or its derivative type.

DataVariables shown by <ConfigurationName> correspond to the CSPP elements in the COMM_IF_CONFIGURATION part of the CSP+ for machine. The VariableType is DataItemType VariableType specified by the OPC 10000-8 or its derivative type.

Object corresponding to the COMM_IF section takes a role to make machine Object group the machine information per CSPP section. In addition, it takes a role to organize the COMM_IF_VARIABLE part and COMM_IF_CONFIGURATION part in the COMM_IF section. Table 63 shows the definition of the Object.

Table 63 – Definition of Object Corresponding to COMM_IF Section

Attribute	Value
BrowseName	(name of COMM_IF section)
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule	Details
HasTypeDefinition	ObjectType	1:FunctionalGroupType
HasComponent	Object	<CommIfVariablePart>	-	FunctionalGroupType	OptionalPlaceholder	6.2.1.4
HasComponent	Object	<CommIfConfigurationPart>	-	FunctionalGroupType	OptionalPlaceholder	6.2.1.5
Organizes	Variable	<VariableOrConfigurationName>	(Any)	DataItemType	MandatoryPlaceholder	-

Objects shown by <CommIfVariablePart> correspond to COMM_IF_VARIABLE part of the CSP+ for machine and take a role to group machine information for realtime monitor held by the machine.

Objects shown by <CommIfConfigurationPart> correspond to COMM_IF_CONFIGURATION part of the CSP+ for machine and take a role to group machine information for general purpose held by the machine.

Object corresponding to the COMM_IF_VARIABLE part takes a role to group the machine information for realtime monitor held by the machine Object per part. Table 64 shows the definition of the Object.

Table 64 – Definition of Object Corresponding to COMM_IF VARIABLE Part

Attribute	Value
BrowseName	(name of COMM_IF_VARIABLE part)
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule	Details
HasTypeDefinition	ObjectType	1:FunctionalGroupType
Organizes	Variable	<VariableName>	(Any)	DataItemType	MandatoryPlaceholder	-

Object corresponding to the COMM_IF_CONFIGURATION part takes a role to group the machine information for general purpose held by the machine Object per part. Table 65 shows the definition of the Object.

Table 65 – Definition of Object Corresponding to COMM_IF_CONFIGURATION Part

Attribute	Value
BrowseName	(name of COMM_IF_CONFIGURATION part)
IsAbstract	False
References	NodeClass	BrowseName	DataType	TypeDefinition	ModellingRule	Details
HasTypeDefinition	ObjectType	1:FunctionalGroupType
Organizes	Variable	<ConfigurationName>	(Any)	DataItemType	MandatoryPlaceholder	-