Extruder_InterfaceType Definition – OPC UA interfaces for plastics and rubber machinery - Extrusion

6.1 Extruder_InterfaceType Definition

This OPC UA ObjectType is used for the root Object representing an extruder as part of an extrusion line. It is based on the ExtrusionDeviceType (defined in OPC 40084-1) and formally defined in Table 1.

The instance(s) of Extruder_InterfaceType shall be located under the Machines Object of the Server (see OPC UA for Machinery).

Figure 1 - Extruder_InterfaceType Overview

Table 1 - Extruder_InterfaceType Definition

Attribute	Value
BrowseName	Extruder_InterfaceType
IsAbstract	False

References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 4:ExtrusionDeviceType (defined in OPC 40084-1)
0:HasProperty	Variable	BarrelId	0:String	0:PropertyType	O, RO
0:HasProperty	Variable	ScrewId	0:String	0:PropertyType	O, RO
0:HasComponent	Object	MainDrive		3:DriveType	O
0:HasComponent	Object	AdditionalDrives		3:DrivesType	O
0:HasComponent	Object	Throughput		3:MonitoredParameterType	O
0:HasComponent	Variable	SpecificOutput	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Object	Users		3:UsersType	M
0:HasComponent	Object	TemperatureZones		4:ExtrusionTemperatureZonesType	M
0:HasComponent	Object	MeltTemperatureZones		3:MeasuringDevicesType	O
0:HasComponent	Object	MeltPressureZones		3:MeasuringDevicesType	O
0:HasComponent	Object	VacuumZones		3:MeasuringDevicesType	O
0:HasComponent	Object	ScrewTemperatures		4:ExtrusionTemperatureZonesType	O
0:HasComponent	Object	Feeders		FeedersType	O

Conformance Units
OPC 40084-3 Basic

The BrowseName of the object instance shall be "Extruder_<Manufacturer>_<SerialNumber>"

Example: "Extruder_Coperion_0123456".