Search

Scope: Core (OPC-10000-*) All specs

46 result(s) for HasSubtype

OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

4.6.3 Subtyping

would do this by creating a new VariableType which is a TargetNode for a HasSubtype reference from the original VariableType and adding the new Property
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.3.2 Attributes

with a ReferenceType than can be expressed in those Attributes (e.g. the semantic of HasSubtype ). This standard does not specify how this semantic should be exposed. However, the Description Attribute
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.3.3.3 HasSubtype References

HasSubtype References HasSubtype References are used to define subtypes of ReferenceTypes . It is not required to provide the HasSubtype Reference for the supertype, but it is required that the subtype
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.5.2 ObjectType NodeClass

instantiated when an Object of this type is instantiated, is specified in 6.4 . HasSubtype 0..* HasSubtype References identify ObjectTypes that are subtypes of this type. The inverse Reference identifies ... document. Additional parts of this series of standards may define additional Properties for ObjectTypes . HasSubtype References are used to subtype ObjectTypes . ObjectType subtypes inherit the general semantics from the parent
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

5.6.5 VariableType NodeClass

instantiated by the instances of this type, depending on the ModellingRules defined in 6.4.4 . HasSubtype 0..* HasSubtype References identify VariableTypes that are subtypes of this type. The inverse Reference identifies ... defines a set of Properties that can be used for VariableTypes . HasSubtype References are used to subtype VariableTypes . VariableType subtypes inherit the general semantics from the parent type. The general
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.1 Overview

Overview The HasSubtype ReferenceType defines subtypes of types. Subtyping can only occur between Nodes of the same NodeClass . Rules for subtyping ReferenceTypes are described in 5.3.3.3 . There is no common
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

6.3.3.1 Overview

collected from all types that can be found by recursively following the inverse HasSubtype References from the subtype. This collection of InstanceDeclarations is called the fully-inherited InstanceDeclarationHierarchy
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

7.10 HasSubtype ReferenceType

HasSubtype ReferenceType The HasSubtype ReferenceType is a concrete ReferenceType that can be used directly. It is a subtype of the HasChild ReferenceType . The semantic of this ReferenceType is to express ... SourceNode . Each ReferenceType shall be the TargetNode of at most one Reference of type HasSubtype
OPC-10000-3 – OPC Unified Architecture - Part 3: Address Space Model

C.2.2 Simple notation

left. The double closed and filled arrows have to point to the TargetNode . HasSubtype The notation provides a shortcut for HasSubtype References shown on the left. The double closed arrows
OPC-10000-4 – OPC Unified Architecture - Part 4: Services

7.7.3 FilterOperator

subtype of another type set as operand[0] by setting operand[2] to the HasSubtype ReferenceType and operand[3] to 0. The Like operator can be used to perform wildcard
OPC-10000-6 – OPC Unified Architecture - Part 6: Mappings

F.12 DataTypeDefinition

fields inherited from a base DataType . When Applications ingest a UANodeSet they follow the HasSubtype References between DataType Nodes to collect all of the fields needed to fill
OPC-10000-120 – OPC Unified Architecture - Part 120: OPC UA and XML Data Type Mapping

3.3.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-10000-211 – OPC Unified Architecture - Part 211: Global Positioning

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-10030 – OPC Unified Architecture - Common Object Model: ISA-95

5.1.7.3 UMLGeneralization

specialized type of the super UML Class, it mapped to the OPC UA HasSubtype ReferenceType
OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3

4.3 Introductory Example

ObjectType CTU_INT is derived from the ObjectType CtrlFunctionBlockType which is indicated by the HasSubType Reference . Current values at a certain point in time are provided by the instances
OPC-30010 – OPC UA for AutoId Devices - AutoID: OPC UA for AutoId Devices

4.2.2 Graphical Notation

pointing from the source Node to the target Node . The only exception is the HasSubtype Reference . The most important References like HasComponent , HasProperty , HasTypeDefinition and HasSubtype have special symbols avoiding ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubtype Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-30030 – OPC UA for BACnet - BACnet: OPC UA Information Model

4.2.2 Graphical Notation

pointing from the source Node to the target Node . The only exception is the HasSubType Reference . The most important References like HasComponent , 0:HasProperty , HasTypeDef i nition and HasSubType have ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubType Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-30040 – OPC UA for AutomationML - Xxx: OPC UA Information Model for AutomationML

4.2.2 Graphical Notation

pointing from the source Node to the target Node . The only exception is the HasSubType Reference . The most important References like HasComponent , HasProperty , HasTypeDef i nition and HasSubType have special ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubType Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-30081 – OPC UA for Process Automation Devices - PA-DIM™

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture

4.2.2 Graphical notation

pointing from the source Node to the target Node . The only exception is the HasSubtype Reference . The most important References like HasComponent , HasProperty , HasTypeDef i nition and HasSubtype have special ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubtype Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-30130 – OPC UA for Control & Communication System Profile(for Machine)

4.2.2 Graphical notation

pointing from the source Node to the target Node . The only exception is the HasSubType Reference . The most important References like HasComponent , HasProperty , HasTypeDefinition and HasSubType have special symbols avoiding ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubType Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-30143 – OPC UA for PROFINET Encoder - Part <mm>: <Part Name>

3.5.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-30144 – OPC UA for PROFINET GSD Generic Model - Part 30144: PROFINET GSD Generic Model

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-30145 – OPC UA for PROFINET Drives - Part 30145: UA CS for PROFINET Drives

3.5.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-30210-1 – OPC UA for Unattended Retail & Coffee Solutions - Part 1: Core Components

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-30500-1 – OPC UA for Laboratory & Analytical Device Standard (LADS) - Part 1: Basics

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-34100 – OPC UA for Energy Consumption Management

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40001-1 – OPC UA for Machinery - Part 1: Basic Building Blocks

3.4.1.1 Node Definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40020-1 – OPC UA for Cranes and Hoists - Part 1: Base Model Motion Devices System

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40301 – OPC UA for Flat Glass Processing

3.5.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40444 – OPC UA for Textile Testing Devices

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40450-1 – OPC UA for Joining Systems - Part 1: Base

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40502 – OPC UA for Computerized Numerical Control (CNC) Systems - for CNC Systems: OPC UA Information Model

4.2.2 Graphical Notation

pointing from the source Node to the target Node . The only exception is the HasSubtype Reference . The most important References like HasComponent , HasProperty , HasTypeDef i nition and HasSubtype have special ... HasTypeDefinition References . The ObjectType_Y is derived from ObjectType_X indicated by the HasSubtype Reference . The Object_A has the components Variable_1, Variable_2 and Method_1. To describe
OPC-40503-1 – OPC UA for Metal Forming - Part 1: General

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40504-1 – OPC UA for Cutting Tools - Part 1: Manufacturing

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40505 – OPC UA for Wireless Machine Tool Peripherals

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40530 – OPC UA for Laser Systems

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40550-1 – OPC UA for Woodworking Machines - Part 1: Vertical Interface

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40560 – OPC UA for Mining - General

3.2.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40570 – OPC UA for Wire Harness Manufacturing

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40700 – OPC UA for Surface Technology - General Types

3.3.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40701 – OPC UA for Surface Technology - Cleaning and Pretreatment

3.3.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40702 – OPC UA for Surface Technology - Organic Coating Technology - Material Supply Systems

3.3.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40718 – OPC UA for Surface Technology - Shot Blasting Machinery

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40719 – OPC UA for Plasma Surface Technology

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes
OPC-40740 – OPC UA for Process Air Extraction and Filtration Systems (PAEFS)

3.4.1.1 Node definitions

HierarchicalReference . Dependencies also exist if the Node is the target of a HasSubtype Reference . For Variables and VariableTypes , the value of the DataType Attribute is a dependency. For DataType Nodes