OPC UA ObjectTypes – OPC UA for Tightening Systems

5 OPC UA ObjectTypes

5.1 ITighteningToolParametersType InterfaceType Definition

The interface ITighteningToolParametersType is inherited from 0:BaseInterfaceType to add additional parameters of a tool in a tightening system. It shall be added to 2:Parameters object of the tool instance.

Table 1 – ITighteningToolParametersType Definition

Attribute	Value
BrowseName	ITighteningToolParametersType
IsAbstract	True

References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of the 0:BaseInterfaceType, inheriting the InstanceDeclarations of that Node.
0:HasComponent	Variable	DesignType	0:Byte	0:MultiStateDiscreteType	M, RO
0:HasComponent	Variable	DriveMethod	0:Byte	0:MultiStateDiscreteType	M, RO
0:HasComponent	Variable	DriveType	0:Byte	0:MultiStateDiscreteType	M, RO
0:HasComponent	Variable	MaxTorque	0:Double	2:JoiningDataVariableType	O, RO
0:HasComponent	Variable	MinTorque	0:Double	2:JoiningDataVariableType	O, RO
0:HasComponent	Variable	ShutOffMethod	0:Byte	0:MultiStateDiscreteType	O, RO
0:HasComponent	Variable	MaxSpeed	0:Double	2:JoiningDataVariableType	O, RO
0:HasComponent	Variable	MotorType	0:String	0:BaseDataVariableType	O, RO

Conformance Units
IJT_TIGHTENING Asset Management Tightening Tool Parameters

DesignType provides information on the design of the Tool.

DriveMethod provides information on the drive method of the motor of the Tool.

DriveType provides information on the drive type of the Tool.

ShutOffMethod provides information on the shutoff method of the tool.

In Table 2, standardized values for the EnumStrings attribute for the above listed variables is defined. Each instance of the following variables Type, DesignType, DriveMethod, DriveType, ShutOffMethod shall follow the defined sequence for the entries.

Note: Servers can add additional entries into the EnumStrings array and may provide translations of the texts in different locales.

MaxTorque is the maximum allowed torque for which the tool may be used for tightening processes.

MinTorque is the minimum allowed torque for which the tool may be used for tightening processes.

MaxSpeed is the maximum rotation speed of the driving shaft.

MotorType is the type of motor in the tool.

Table 2 – ITighteningToolParametersType Attribute values for child nodes

BrowsePath	Value Attribute
	OTHER PISTOL ANGLE STRAIGHT OFFSET REVERSE_OFFSET
	OTHER CONTINUOUS PULSE RATCHETING TENSIONING MANUAL INERTIA HYBRID
	OTHER ELECTRIC HYDRAULIC PNEUMATIC MANUAL
	OTHER MECHANICAL CURRENT TRANSDUCER