19 DistancesType
19.1 DistancesType definition
The DistancesType is a container object, which provides information about the monitored distances in the mould. Examples for distances include breathing, offset, slider position. It is formally defined in Table 30.
| Attribute | Value | ||||
| BrowseName | DistancesType | ||||
| IsAbstract | False | ||||
| References | Node Class | BrowseName | DataType | TypeDefinition | Other |
|---|---|---|---|---|---|
| Subtype of 0:BaseObjectType defined in OPC 10000-5 | |||||
| 0:HasProperty | Variable | 0:NodeVersion | 0:String | 0:PropertyType | M, RO |
| 0:HasComponent | Object | <Breathing_Nr> | MouldProcessValueType | OP | |
| 0:HasComponent | Object | <Alignment_Nr> | MouldProcessValueType | OP | |
| 0:HasComponent | Object | <Distance_Nr> | MouldProcessValueType | OP | |
| Conformance Units | |||||
|---|---|---|---|---|---|
| OPC 40082-5 Distances | |||||
19.2 <Breathing_Nr>
The <Breathing_Nr> provides a placeholder for breathing values. When instances are created the BrowseNames shall be "<Breathing_Nr>" where "Nr" is a three-digit number with leading zeros, starting with "001".
The MouldProcessValueType is defined in 24.
| Unit: | mm or in |
19.3 <Alignment_Nr>
The <Alignment_Nr> provides a placeholder for alignment values. When instances are created the BrowseNames shall be "<Alignment_Nr>" where "Nr" is a three-digit number with leading zeros, starting with "001".
The MouldProcessValueType is defined in 24.
| Unit: | mm or in |
19.4 <Distance_Nr>
The <Distance_Nr> provides a generic placeholder for distances. When instances are created the BrowseNames shall be "<Distance_Nr>" where "Nr" is a three-digit number with leading zeros, starting with "001".
The MouldProcessValueType is defined in 24.
| Unit: | mm or in |