11.1 OperationType definition
The OperationType provides cycle counters, cycle times and methods to set the machine state and cycle numbers.
Figure 4 - OperationType Overview
Table 15 - OperationType Definition
| Attribute | Value |
| BrowseName | OperationType |
| IsAbstract | False |
| References | Node Class | BrowseName | DataType | TypeDefinition | Other |
|---|
| Subtype of the 0:BaseObjectType defined in OPC 10000-5 |
| 0:HasComponent | Method | SetMachineState | | | M |
| 0:HasComponent | Method | SetOperationMode | | | M |
| 0:HasComponent | Method | SetCycleNumber | | | M |
| 0:HasComponent | Variable | MouldLifetimeCycleCounter | 0:UInt64 | 0:BaseDataVariableType | M,RO |
| 0:HasComponent | Variable | JobCycleCounter | 0:UInt64 | 0:BaseDataVariableType | M,RO |
| 0:HasComponent | Variable | CavityCycleCounter | CavityCycleCounterDataType[] | 0:BaseDataVariableType | O,RO |
| 0:HasProperty | Variable | EstimatedCycleTime | 0:Duration | 0:PropertyType | O,RW |
| Conformance Units |
|---|
| OPC 40082-5 Basic |
