6.5 CalibrationZonesType

This Object is a container for the calibration zones but gives also information about the total water flow and water temperature.

Figure 3 – CalibrationZonesType Overview
Table 2 – CalibrationZonesType Definition
Attribute Value
BrowseNameCalibrationZonesType
IsAbstractFalse
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasPropertyVariable0:NodeVersion0:String0:PropertyTypeM, RO
0:HasComponentObjectWaterFlowIn3:MeasuringDeviceTypeO
0:HasComponentObjectWaterFlowOut3:MeasuringDeviceTypeO
0:HasComponentObjectWaterTemperatureIn3:MeasuringDeviceTypeO
0:HasComponentObjectWaterTemperatureOut3:MeasuringDeviceTypeO
0:HasComponentObjectCalibrationZone_<Nr>CalibrationZoneTypeOP
0:GeneratesEventObjectTypeGeneralModelChangeEventType
Conformance Units
OPC 40084-10 Basic

6.5.1 WaterFlowIn, WaterFlowOut

In and out Flow rate (in volume per time) of the water in the calibration zone. The used MeasuringDeviceType is defined in OPC 40083.

6.5.2 WaterTemperatureIn, WaterTemperatureOut

In and out temperature of the water in the calibration zone. The used MeasuringDeviceType is defined in OPC 40083.

6.5.3 CalibrationZoneType

This Object represents information about a single calibration zone.

Table 3 – CalibrationZoneType Definition
Attribute Value
BrowseNameCalibrationZoneType
IsAbstractFalse
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasPropertyVariableName0:LocalizedText0:PropertyTypeM, RW
0:HasPropertyVariablePosition0:String0:PropertyTypeO, RO
0:HasPropertyVariableIsPresent0:Boolean0:PropertyTypeM, RO
0:HasComponentObjectVacuumPumps3:DrivesTypeO
0:HasComponentObjectWaterPumps3:DrivesTypeO
0:HasComponentObjectVacuum3:MeasuringDeviceTypeO
0:HasComponentObjectWaterTemperature3:MeasuringDeviceTypeO
0:HasComponentObjectWaterFlow3:MeasuringDeviceTypeO
0:HasComponentObjectWaterLevel3:MeasuringDeviceTypeO
0:HasComponentObjectAirShowerPressure3:MeasuringDeviceTypeO
0:HasComponentObjectAdditionalMeasuringDevices3:MeasuringDevicesTypeO
Conformance Units
OPC 40084-10 Basic
6.5.3.1 Name

Name of the calibration zone.

6.5.3.2 Position

Position of the calibration zone.

6.5.3.3 IsPresent

Indication if the calibration is present/used in the process

6.5.3.4 VacuumPumps

Information about the vacuum pumps in the calibration zone. The DrivesType is defined in OPC 40083.

6.5.3.5 WaterPumps

Information about the water pumps in the calibration zone. The DrivesType is defined in OPC 40083.

6.5.3.6 WaterTemperature

Measurement of the water temperature in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

6.5.3.7 WaterFlow

Measreument of the water flow in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

6.5.3.8 Water level

Measreument of the water level in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

6.5.3.9 AirShowerPressure

Measreument of the pressure of the air shower in the calibration zone. The MeasuringDevicesType is defined in OPC 40083.

6.5.3.10 AdditionalMeasuringDevices

Container for any other measured values in the calibration zone.