6.1 Die_InterfaceType Definition

This OPC UA ObjectType is used for the root Object representing a die as part of an extrusion line. It is based on the ExtrusionDeviceType (defined in OPC 40084-1) and formally defined in Table 1.

The instance(s) of Die_InterfaceType shall be located under the Machines Object of the Server (see OPC UA for Machinery).

Figure 1 - Die_InterfaceType Overview
Table 1 - Die_InterfaceType Definition
Attribute Value
BrowseNameDie_InterfaceType
IsAbstractFalse
ReferencesNode ClassBrowseName DataTypeTypeDefinitionOther
Subtype of 4:ExtrusionDeviceType (defined in OPC 40084-1)
0:HasComponentObjectTemperatureZones4:ExtrusionTemperatureZonesTypeM
0:HasComponentObjectMeltPressures3:MeasuringDevicesTypeO
0:HasComponentObjectDimensionAdjustment3:MeasuringDevicesTypeO
Conformance Units
OPC 40084-7 Basic

The BrowseName of the object instance shall be "Die_<Manufacturer>_<SerialNumber>".

Example: "Die_Erema_0123456".