Search

18 result(s) for MethodSet

• OPC-10000-100 – OPC Unified Architecture - Part 100: Devices
  4.3 TopologyElementType
  elements in a device or component topology. Among others, it introduces FunctionalGroups , ParameterSet , and MethodSet . Figure 2 shows the TopologyElementType . It is formally defined in Table 12 . Figure 2 - Components ... LockingServicesType O 0:HasComponent Object 1:ParameterSet 0:BaseObjectType O 0:HasComponent Object 1:MethodSet 0:BaseObjectType O Conformance Units DI Information Model The TopologyElementType is abstract. There will
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  4.2.3.4 Introduction to OPC UA Devices
  Device Object . The component ParameterSet contains all Variables describing the Device . The component MethodSet contains all Methods provided by the Device . Both components are inherited from the TopologyElementType which
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  7.1.1 Overview
  inheriting the InstanceDeclarations of that Node. HasComponent Object 2:MethodSet BaseObjectType Optional HasComponent Object Resources ConfigurableObjectType Mandatory HasComponent Object GlobalVars FunctionalGroupType Optional HasComponent Object AccessVars FunctionalGroupType Optional HasComponent Object ConfigVars ... Parameters and FunctionalGroup s as defined for the TopologyElementType in OPC 10000-100 . The MethodSet Object is defined by the TopologyElementType and is overwritten in the CtrlConfigurationType
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  7.1.3 MethodSet components
  MethodSet components The Methods available as parts of the CtrlConfigurationType are formally defined in Table 10 . Table 10 - Components of the CtrlConfigurationType MethodSet Attribute Value BrowseName MethodSet References Node Class
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  7.2.1 Overview
  inheriting the InstanceDeclarations of that Node. HasComponent Object 2:MethodSet BaseObjectType Optional HasComponent Object Tasks ConfigurableObjectType Mandatory HasComponent Object Programs ConfigurableObjectType Mandatory HasComponent Object GlobalVars FunctionalGroupType Optional HasComponent Object Configuration ... Parameters and FunctionalGroup s as defined for the TopologyElementType in OPC 10000-100 . The MethodSet Object is defined by the TopologyElementType and is overwritten in the CtrlResourceType
• OPC-30000 – OPC UA for Programmable Logic Controllers based on IEC61131-3
  7.2.4 MethodSet components
  MethodSet components The Methods available as parts of the CtrlResourceType are formally defined in Table 14 . Table 14 - Components of the CtrlResourceType MethodSet Attribute Value BrowseName MethodSet References NodeClass BrowseName
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  12.2.2 TopologyElementType
  information provided by a DTM with IFunction.FunctionInfo and IData.DataInfo is mapped into the MethodSet and to the ParameterSet . For both types of information (Commands and Parameters) also references in FunctionalGroup ... list of parameters is constructed from the hierarchical list where duplicates must be removed. MethodSet IFunction FunctionInfo FunctionInfo.FunctionItems FunctionItems provides a hierarchical list of functions that are supported
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  12.2.3 FunctionalGroupType
  FunctionalGroupType is used to organize Parameters and Methods (which are defined in ParameterSet and MethodSet ) in a user-friendly way (see Table 63 ). FunctionalGroups may be organized hierarchically by organizing
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  12.2.5 Device Data and Device Methods
  defined in separate areas of the OPC UA Information model (i.e. ParameterSet and MethodSet ), they are organized by functional groups into a concise representation, which may be structured to present ... Information model and the command functions from IFunction interface are mapped to the MethodSet of the device. The hierarchical structures in the IData and IFunction interfaces are mapped
• OPC-30090 – OPC UA for Field Device Tool (FDT) - Part <mm>: <Part Name>
  12.2.6.1 General
  optional default values. Each command function shall be mapped to a method in the MethodSet of the device instance (see Figure 15 ). The arguments are mapped to the InputArguments
• OPC-30110 – OPC UA for POWERLINK - POWERLINK: OPC Unified Architecture
  6.2.1 General
  these Variables, this specification defines a list of Methods (components of the Object MethodSet ). As defined by the concepts of OPC 10000-100 the Parameters ( Variables ) of the ParameterSet ... Methods of the MethodSet are organised in FunctionalGroups where they are referenced by Organize-References . This concept allows splitting the Parameters into different categories, and at the same time
• OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture
  7.1.2 Overview
  defined in OPC 10000-100 . HasComponent Object 2:ParameterSet BaseObjectType Mandatory HasComponent Object 2:MethodSet BaseObjectType Mandatory HasComponent Object 2:Identification FunctionalGroupType Mandatory HasComponent Object General FunctionalGroupType Mandatory HasProperty Variable ... ObjectType overrides the Object and changes the ModellingRule to Mandatory. The optional Object MethodSet is used to reference all Methods and shall be provided. Therefore, the ObjectType overrides the Object
• OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture
  7.5.2 Overview
  defined in OPC 10000-100 . HasComponent Object 2:ParameterSet BaseObjectType Mandatory HasComponent Object 2:MethodSet BaseObjectType Mandatory HasComponent Object 2:Identification FunctionalGroupType Mandatory HasComponent Object Capabilities FunctionalGroupType Mandatory HasComponent Object ... ObjectType overrides the Object and changes the ModellingRule to Mandatory. The optional Object MethodSet is used to reference all Methods and shall be provided. Therefore, the ObjectType overrides the Object
• OPC-30120 – OPC UA for IO-Link Devices and IO-Link Masters - IO-Link: OPC Unified Architecture
  7.6.2 Overview
  defined in OPC 10000-100 . HasComponent Object 2:ParameterSet BaseObjectType Mandatory HasComponent Object 2:MethodSet BaseObjectType Mandatory HasProperty Variable DeviceConfigurationDisabled Boolean PropertyType Mandatory HasComponent Object Capabilities FunctionalGroupType Mandatory HasComponent Object ... ObjectType overrides the Object and changes its ModellingRule to Mandatory. The optional Object MethodSet is used to reference all Methods and shall be provided. Therefore, the ObjectType overrides the Object
• OPC-40561-2 – OPC UA for Mining - Extraction - Part 2: Shearer Loader
  7.1.1 Overview
  type of the MiningEquipmentType as shown in Figure 2 . Importantly, it contains a MethodSet and ParameterSet to monitor and control all relevant parameters of the equipment. Figure 2 - Overview ShearerLoaderType
• OPC-40564-2 – OPC UA for Mining - Mineral Processing - Part 2: Rock Crusher
  7.1.1 Overview
  components and has the ability, through inheritance, to have its own Parameter - and MethodSet . Figure 2 - Overview RockCrusherType
• OPC-40564-2 – OPC UA for Mining - Mineral Processing - Part 2: Rock Crusher
  7.2.1 Overview
  type of the MiningEquipmentType as defined in Figure 3 . It consists also of a MethodSet and a ParameterSet to cover all relevant aspects of the equipment. Figure 3 - Overview RockCrusherControlType
• OPC-40565-3 – OPC UA for Mining - Development - Part 3: Dozer
  6.1.1 Overview
  shown in Figure 1 . Importantly, it is composed of a ParameterSet and a MethodSet to monitor and control all relevant aspects of the equipment. Figure 1 - Overview DozerType