OPC 40210: Geometric Measuring Systems
Released 1.00
2023-05-24
This document is subject to the license terms described here.
The general OPC Foundation specification license agreement also applies and can be found here.
This document is a copy of the original which can be found here.
This document defines nodes in the following nodesets:
1 Scope
2 Normative references
3 References
4 Terms, abbreviated terms and conventions
4.1 Overview
4.2 OPC UA for GMS terms
4.2.1 Geometric Measurement System (GMS)
4.2.2 Measurement Reason (MeasReason)
4.2.3 Measurement Routine (MeasurementRoutine)
4.2.4 Measuring System
4.2.5 Master
4.2.6 Part
4.2.7 Sensor (Primary)
4.2.8 Additional Sensor
4.2.9 Calibration
4.2.10 Qualification
4.3 Abbreviated terms
4.4 Conventions used in this document
4.4.1 Conventions for Node descriptions
4.4.1.1 Node definitions
4.4.1.2 Additional References
4.4.1.3 Additional sub-components
4.4.1.4 Additional Attribute values
4.4.2 NodeIds and BrowseNames
4.4.2.1 NodeIds
4.4.2.2 BrowseNames
4.4.3 Common Attributes
4.4.3.1 General
4.4.3.2 Objects
4.4.3.3 Variables
4.4.3.4 VariableTypes
4.4.3.5 Methods
5 General information about Geometric Measurement Systems (GMS) and OPC UA
5.1 Introduction to Geometric Measurement Systems in Industrial Production
5.1.1 Definition of a Geometric Measurement System
5.1.2 Classification and Structure of Geometric Measurement Systems
5.1.3 Result Management in Geometric Measurement Systems
5.2 Introduction to OPC Unified Architecture
5.2.1 What is OPC UA?
5.2.2 Basics of OPC UA
5.2.3 Information modelling in OPC UA
5.2.3.1 Concepts
5.2.3.2 Namespaces
5.2.3.3 Companion Specifications
6 Use cases
6.1 Retrieve static machine data
6.2 Retrieve dynamic machine status
6.3 Job management
6.4 Managing part data
6.5 Retrieve measurement results
7 Geometric Measurement System Information Model overview
8 OPC UA ObjectTypes
8.1 GMSType
8.2 MultiSensorType
8.3 SensorType
8.4 PtMeas:LoadingMonitoringType
8.5 ToolMonitoringType
8.6 GMSEquipmentType
8.7 GMSIdentificationType
8.8 GMSMonitoringType
8.9 GMSJobType
8.10 GMSPartType
8.11 CalibrationPrognosisType
8.12 GMSResultManagementType
8.13 CorrectionType
8.14 RotaryTableType
8.15 SensorExchangeRackType
8.16 TipExchangeRackType
8.17 CharacteristicType
9 OPC UA EventTypes
9.1 SensorWarningAlarmType
9.2 IntermediateResultEventType
10 OPC UA VariableTypes
10.1 GMSResultType
10.2 CatalogType
10.3 AdditionalSensorType
11 OPC UA DataTypes
11.1 WorkspaceType
11.2 CartesianWorkspaceType
11.3 CylindricalWorkspaceType
11.4 MeasurementReasonEnum
11.5 ToleranceLimitEnum
11.6 ToolAlignmentState
11.7 ToolIsQualifiedStatus
12 Profiles and Conformance Units
12.1 Overview
12.2 Conformance Units
12.3 Profiles
12.3.1 Profile list
12.3.2 Server Facets
12.3.2.1 Overview
12.3.2.2 GMS Basic Server Profile
12.3.2.3 GMS Basic Secure Server Profile
12.3.2.4 GMS Monitoring Server Profile
12.3.2.5 GMS Tools Server Facet
12.3.2.6 GMS Tool Life Server Facet
12.3.2.7 GMS Production Server Facet
12.3.2.8 GMS Errors and Alerts Server Facet
12.3.2.9 GMS Prognoses Server Facet
12.3.2.10 GMS Result Server Facet
13 Namespaces
13.1 Namespace Metadata
13.2 Handling of OPC UA Namespaces
Annex A (normative) GMS Namespace and mappings
A.1 NodeSet and Supplementary Files for GMS Information Model
Annex B (informative) Example of a minimal Geometric Measurement System