10.5 CuttingUnitParameters

This folder contains the cutting unit parameters.

Figure 9 - Cutting Unit Parameters Overview

10.5.1 CuttingThickness

Provides the set value of the cutting thickness.

Units: mm or in

10.5.2 CuttingAngle

Provides the current cutting angle in degrees (°).

10.5.3 CuttingUnitPosition

Provides the current position of the cutting unit relative to a machine-specific reference point and range, where both zero and maximum values are machine-specific.

Units: mm or in

10.5.4 PressureRollerDrive

Provides information about the pressure roller drive. The DriveType is defined in OPC 40083.

Units for speed: m/min or ft/min

10.5.5 PressureRollerOffset

Provides the offset of the pressure roller. Positive values mean offset inside the material.

Units: mm or in